Adjustment flow to use a new type of paper
Timing
Perform this adjustment at any of the following timings:
When you use a new type of paper
When this machine cannot reproduce colors, although you perform the daily maintenance flow (high accuracy)
Order
Case in which the RU optional unit (Relay Unit RU-518) is not mounted
Gamma Automatic Adjustment
This automatically adjusts the color reproducibility of the whole paper to be output.
Density Balance Auto. Adjustment / Density Balance Adjustment
Controller Calibration
Correct color reproducibility that changes day by day.
Color balance adjustment
Perform Exact Color or G7 Calibration to increase the reproducibility of the color balance.
Case in which the RU optional unit (Relay Unit RU-518) is mounted
Gamma Automatic Adjustment
This automatically adjusts the color reproducibility of the whole paper to be output.
Density Balance Auto. Adjustment / Density Balance Adjustment
Color Density Control
Color balance adjustment
Perform Exact Color or G7 Calibration to increase the reproducibility of the color balance.
Tips
If you use Package Color Auto Adj., this machine automatically performs these adjustments.
To use Package Color Auto Adj., install Integrated Color Care Unit IQ-501.
For details, refer to Package Color Auto Adj..If you suspend the flow, perform Gamma Automatic Adjustment and then restart the flow.
The default of the color balance adjustment is Exact Color.
To switch this adjustment to G7 calibration, contact your service representative.