Regular adjustment flow: High Precision
In addition to Regular adjustment flow: Normal, perform this adjustment especially in the following cases:
Immediately before the job for which hue is important is output
When the color stability is not desirable (you want to increase the accuracy of reproducibility)
When the paper type is different
If you use Package Color Auto Adj., this machine automatically makes the adjustments in step 2 below and after.
To use the function, install Integrated Color Care Unit IQ-501. For details, refer to Package Color Auto Adj..
Without RU optional unit (Relay Unit RU-518) mounted
Gamma Automatic Adjustment
This automatically adjusts the color reproducibility of the whole paper to be output.
Maximum Density Adjustment
Increase the accuracy of reproducibility of density.
Controller Calibration
Correct color reproducibility that changes day by day.
With RU optional unit (Relay Unit RU-518) mounted
Color Density
Confirm whether the Periodical Adj. Execution of Basic Setting is set to ON.
In Color Density in Paper Setting, check if Default Adj. Data or Registered Adj. Data is selected for the tray.
Applying the registered adjusted color density to the machine
To use general paper, select Default Adj. Data.
To use special paper or increase the accuracy of the automatic adjustment, Each Paper Type Color Adj. is recommended. For details, refer to Color Density Control: Each Paper Type Color Adjustment.