Menu

Color

Color Adjustment
- Overview of Color Adjustment
Color Matching: Matching the Target Colors
- About Color Matching
- Executing Color Matching
Color Management: Stabilizing Color Reproducibility
- About Color Management
- Color Management Adjustment Flow
- Performing Quality Adjustment
- Image Quality Adjustment Using Color Centro
Adjusting the Image Quality
- Controller Calibration
- Executing Advanced Controller Calibration (Exact Color)
- Executing Advanced Controller Calibration (G7)
- Registering the Output Profile (Printer Profile)
- Color Validation
- Spot Color: Printing in Special Colors
- Registering Alternative Colors (Changing RGB colors to CMYK colors)
- Registering Alternative Colors (Changing CMYK Colors to Different CMYK Colors)
- Tone Curve: Adjusting the Brightness and Contrast
- Color Default Settings
- Register a Color Configuration
- Changing the Screen
- Auto Image Adjustment Function

Applying Spot Colors for Printing Using the Printer Driver

You can apply the registered spot colors for printing.

Open the original data with the application, and then click Print on the File menu.
Select the printer to use for printing and click Properties.
Click the Management tab, and then click Manual Settings.
- supplementary explanationIf the Management tab is not displayed, click to switch the tab display.
Click Optional Settings and select Spot Color. Click OK.
On the Print screen, enter the Copies and click Print. After printing, check the results.
Check that the original color has been replaced by the specified color (spot color) according to the spot color table.