About Controller Calibration

Calibration is essential to ensure that colors are accurately reproduced when using this machine, because color reproducibility can change from day to day.

The following two calibration methods are available:

  • Color Density Control: Automatic adjustment and manual adjustment, by using a main body function

  • Calibration: Manual adjustment by using Color Centro

Tips

This section explains the manual calibration using the Controller function.

Meaning and Purpose of Controller Calibration

Measure the output density of C, M, Y, and K colors on a chart using the instrument, and give the results to the Controller as feedback. Based on this feedback, the Controller automatically calibrates the output density with reference to the predefined target density. This calibration enables output close to the target density.

When to perform

  • Every 1,000 to 2,000 sheets printed

  • Before printing an important job that requires strict color reproducibility

Intended Environment

Operating system

Windows 7

Application

Color Centro 2.1

Image Controller

Image Controller IC-605

Color Density Control

Off

Colorimeter

i1Pro2

Paper type and thickness

Coated GL 128 g/m2 / 33 lb Bond (A3, Loaded into Tray 1)

* The sample screen may be different from the actual display depending on your system environment and application version/revision.

Workflow

Precautions