1

Top cover

When clearing a paper jam, open the cover and remove the paper.

2

Secondary (sub) tray

Output the trimmed or creased paper or the paper delivered without processing.

3

Secondary (sub) tray extension

Pull out when ejecting large sheets of paper to Secondary (sub) tray.

4

Trimmer unit left side door knob

Used when opening Trimmer unit left side door.

5

Trimmer unit right side door knob

Used when opening Trimmer unit right side door.

6

Trimmer unit right side door

Open this door when clearing a paper jam or replacing an internal option.

7

Trimmer unit left side door

Open this door when clearing a paper jam or replacing an internal option.

8

Card tray door

Open this door when pulling out the Card tray.

9

Knob [TU2]

When clearing a paper jam, turn the knob to feed the paper through.

10

Banner Unit MK-764 (option) (2 locations)

Convey banner paper to the post-processing device, or invert conveyance of paper.

11

Lever [TU1]

When clearing a paper jam, hold the lever, open the guide, and remove the paper.

12

Lever [MK1]

When clearing a paper jam, hold the lever, open the guide, and remove the paper.

13

Knob [MK2]

When clearing a paper jam, turn the knob to feed the paper through.

14

Lever [MK3]

When clearing a paper jam, hold the lever, open the guide, and remove the paper.

15

Knob [MK4]

When clearing a paper jam, turn the knob to feed the paper through.

16

Knob [MK5]

When clearing a paper jam, turn the knob to feed the paper through.

17

Lever [MK6]

When clearing a paper jam, hold the lever, open the guide, and remove the paper.

18

Lever [TU3]

When clearing a paper jam, hold the lever, open the guide, and remove the paper.

19

Knob [TU8]

When clearing a paper jam, turn the knob to feed the paper through.

20

Knob [TU10]

When clearing a paper jam, turn the knob to feed the paper through.

21

Knob [TU12]

When clearing a paper jam, turn the knob to feed the paper through.

22

Knob [TU14]

When clearing a paper jam, turn the knob to feed the paper through.

23

Knob [TU15]

When clearing a paper jam, turn the knob to feed the paper through.

24

Knob [TU16]

When clearing a paper jam, turn the knob to feed the paper through.

25

Lever [TU20]

When clearing a paper jam, hold the lever, open the guide, and remove the paper.

26

Knob [TU21]

When clearing a paper jam, turn the knob to feed the paper through.

27

Card tray (Supplied with Job Separator JS-507) (Option)

Sheets cut to card size are stacked.

28

Knob [TU17]

When clearing a paper jam, turn the knob to feed the paper through.

29

Trim scrap box

Pull out when discarding trim scrap.

30

Knob [TU25]

When clearing a paper jam, turn the knob to feed the paper through.

31

Trimmer Unit TU-504/Creaser Unit CR-103/Perforation Unit PE-101 (Optional)

Trimmer Unit TU-504: Slits the gutter horizontally for the paper feed direction.

Creaser Unit CR-103: Attaches up-convex creases (folding lines) on paper.

Perforation Unit PE-101: Attaches a perforation in the paper feed direction.

* Only one of the following optional devices can be mounted on this system.

32

Creaser Unit CR-102/Perforation Unit PE-102 (optional) 

Creaser Unit CR-102: Attaches down-convex creases (folding lines) on paper.

Perforation Unit PE-102: Attaches a perforation in the paper crosswise direction.

* Only one of the following optional devices can be mounted on this system.

33

Slitter unit

Trims the top and bottom of paper in the paper feed direction.

34

Lever [TU4]

When clearing a paper jam or replacing an internal option, tilt the lever to the left and pull out the conveyance base.

35

Option fixing bracket

Turn to the left when removing an option.

36

Lever [TU5]

When clearing a paper jam or replacing an internal option, tilt the lever to the right and pull out the conveyance base.

37

Job Separator JS-507 (optional)

Stacks the sheets trimmed to card size, and loads them on the Card tray.

38

Knob [TU23]

When clearing a paper jam, turn the knob to feed the paper through.

39

Lever [TU22]

When clearing a paper jam, hold the lever, open the guide, and remove the paper.

40

Lever [TU7]

When clearing a paper jam, hold the lever, open the guide, and remove the paper.

41

Lever [TU9]

When clearing a paper jam, hold the lever, open the guide, and remove the paper.

42

Lever [TU11]

When clearing a paper jam, hold the lever, open the guide, and remove the paper.

43

Lever [TU13]

When clearing a paper jam, hold the lever, open the guide, and remove the paper.

44

Knob [MK8]

When clearing a paper jam, turn the knob to feed the paper through.

45

Lever [MK7]

When clearing a paper jam, hold the lever, open the guide, and remove the paper.

46

Lever [TU18]

When clearing a paper jam, hold the lever, open the guide, and remove the paper.

47

Lever [MK24]

When clearing a paper jam, hold the lever, open the guide, and remove the paper.

48

Lock lever [TU6]

Fixes the pulled-out conveyance unit.

49

Lever [JS1]

When clearing a paper jam, hold the lever, open the guide, and remove the paper.

50

Cleaning plate

Cleans the Line sensor.

51

Dust Box MK-765

Discharges cutting scraps generated in the Trimmer Unit TU-510 to the outside of the machine.