1

Main power switch

The customer engineer switches OFF/ON. Do not turn off under normal circumstances.

2

Toner supply door

Open when replacing Toner bottle.

3

Toner bottle cover (Y, M, C, K)

When replacing Toner bottle, unlock before opening. Toner bottle provides four colors: Yellow (Y), Magenta (M), Cyan (C), and Black (K).

4

Charging Cleaning Knob (4 locations)

Remove and insert this, and clean the Charging Corona.

5

Fusing Conveyance Unit

Pull out in the case of a paper jam. For information about each lever or knob of the Fusing Conveyance Unit, check the screen that is displayed when a paper jam occurs.

6

Lever [M1]

When there is a paper jam, drop to the left and pull out Fusing Conveyance Unit, then remove paper.

7

Drum unit

This part is formed by the copy image.

8

Fusing unit

This part attaches the formed image to the paper.

9

Rear guide plate

Align this guide with the rear edge side of the loaded paper.

10

Side guides

Align this guide with both sides of the loaded paper.

11

Feed roller

Paper is fed into the print device 1 sheet at a time.

12

Side guide lock knobs (2 locations)

When moving Side guides, rotate it counter-clockwise to loosen.

13

Side guide lock release lever

When moving Side guides, press the lever to unlock.

14

Waste toner box

Waste toner will be collected.