If the tri-fold positions are not located evenly, use this option to adjust the first fold position.
Copy after configuration, then repeat adjustments as required.
Settings | Description |
---|---|
[Paper Size] | Select the size of paper that is used to adjust the fold position. |
[Adjust Value] | Enter an adjustment value between -10.0 mm and 10.0 mm by tapping [-] and [+].
[0.0 mm] is specified by default. |
Use this option to adjust the 1st Z-fold position.
Copy after configuration, then repeat adjustments as required.
Settings | Description |
---|---|
[Paper Size] | Select the size of paper that is used to adjust the fold position. |
[Adjust Value] | Enter an adjustment value between -12.8 mm and 12.7 mm by tapping [-] and [+].
[0.0 mm] is specified by default. |
If the tri-fold positions are not located evenly, use this option to adjust the second fold position.
Copy after configuration, then repeat adjustments as required.
Settings | Description |
---|---|
[Paper Size] | Select the size of paper that is used to adjust the fold position. |
[Adjust Value] | Enter an adjustment value between -10.0 mm and 10.0 mm by tapping [-] and [+].
[0.0 mm] is specified by default. |
Use this option to adjust the 2nd Z-fold position.
Copy after configuration, then repeat adjustments as required.
Settings | Description |
---|---|
[Paper Size] | Select the size of paper that is used to adjust the fold position. |
[Adjust Value] | Enter an adjustment value between -12.8 mm and 12.7 mm by tapping [-] and [+].
[0.0 mm] is specified by default. |