For Printing After Temporarily Holding Print Jobs Sent From a Computer (Spool Printing, Proof Printing)
Overview
Use Print Manager to print after temporarily holding files from a computer on the Image Controller HDD.
The following is recommended
This function includes the following features.
If printing a job containing lots of illustrations, the system may experience intermittent printing. In such a case, you can prevent the occurrence of intermittent printing by first holding the job temporarily and then printing it (spool printing).
You can print a single copy or a single sheet as a proof print.
Target Jobs
Hold print jobs
Assumed Operating Environment
Item Name | Contents |
|---|---|
OS | Windows 10 |
NOTICE
- The actual screen displayed may differ depending on the application version or revision, and the environment you are using.
Setting Procedure
1
Access Print Manager.
For details about how to access Print Manager, refer to Print Manager.
For details about how to login, refer to Login Screen.
2
Drag files from your computer and drop them into the [Hold] job list.
The print job is sent to the system, and stored as a hold job.
3
Select a job from the [Hold] job list, and click [Job Settings] in [Job Management].
To select [Job Settings], right-click on the job and select it from the menu.
You can also do this by selecting a job, and then clicking "
".You can also do it by double-clicking the job.
4
Select the [General] tab, and then configure the settings for either [Copies] or [Printing Pages].
To print a single copy, set [Copies] to 1.
To print the first sheet, set [Printing Pages] to 1.
5
Click [Print].
The job is printed according to the configured items.
in the upper-right of a page, it turns into 
and is registered as a bookmark.