If the following symptoms occur at the same time, set a combination of adjustments to suppress the symptoms.
Image jitter
Rough (small image roughness that occurs on the entire surface of the paper due to a transfer slippage)
While checking each symptom, make adjustments as follows.
Setting item | Description |
---|---|
[Reset] | Resets the settings. |
[Image Jitter +1] | Fixability may deteriorate depending on the paper type. |
[Image Jitter +2] to [Image Jitter +4] | Depending on the paper type, image blurring may occur at areas other than the front and rear edges, or the fixability may deteriorate. The larger the number, the more effective it is. |
[Rough Image A] to [Rough Image F] | Select a setting that improves the roughness symptom. |