What Is [Simple Setting]?
Overview
If a problem occurs in a job finishing, adjust [Expert Adj.] items; it may be improved.
In [Simple Setting], the items related to [Expert Adj.] and delivery speed corresponding to various symptoms are set in advance as a preset table. Even settings that require specialized knowledge can be easily adjusted by simply selecting the preset table that corresponds to the symptom.
Tips
- Even while a job is running, the paper setting can be changed for a paper tray that is not being used. However, an item of an inactive key cannot be changed.
Reference
- For details about the related [Expert Adj.], refer to [Expert Adj.].
Setting Items
Screen access
Touch panel - [MACHINE] - [Paper Setting] - [Adjustment] - [Simple Setting]
Setting item | Description |
|---|---|
Main improved phenomena: Paper jam Paper jam that occurs in the transfer section when you mainly print the front side of thin paper (Jam code: J-3102) Related adjustment item: [2nd Transfer Separate Timing:Front] | |
Main improved phenomena: Paper jam Paper jam that occurs in the transfer section when you mainly print the back side of thin paper (Jam code: J-3104) Related adjustment item: [2nd Transfer Separate Timing:Back] | |
Main improved phenomena: Paper jam Paper jam that occurs in the fusing unit when printing Related adjustment item:
| |
Main improved phenomena: Cloudy image and image blur Cloudy image and image blur printed on the front side Related adjustment item:
| |
Main improved phenomena: Cloudy image and image blur Cloudy image and image blur printed on the back side Related adjustment item:
| |
Main improved phenomena: Image blur Image blur printed at the lead or rear edge of the front side of paper Related adjustment item:
| |
Main improved phenomena: Image blur Image blur printed at the lead or rear edge of the back side of paper Related adjustment item:
| |
Main improved phenomena: Image glossiness Gloss adjustment of the printed image Related adjustment item: [Fus.T-Belt Center Temp.(Print)] | |
Main improved phenomena: Image ghosting Occurrences of image ghosting without color (glossiness gap) Related adjustment item:
| |
Main improved phenomena: Toner flaking Phenomenon in which toner flakes off the printed paper Related adjustment item:
| |
Main improved phenomena: Fine lines and character jitter Thin line and character jitter that occurs at the same position of paper when printing Related adjustment item:
| |
Main improved phenomena: Fine lines and character jitter Thin line and character jitter that occurs at the lead or rear edge of paper when printing Related adjustment item:
| |
Main improved phenomena: Fine lines and character jitter Thin line and character jitter that occurs at a distance of 150 mm / 59.055" from the lead edge of paper when printing Related adjustment item:
| |
Main improved phenomena: Density gap at duplex printing Density gradual gap (gloss gap) that occurs when duplex printing Related adjustment item:
| |
Main improved phenomena: Blurring and roughness of image Roughness of the printed image and blurring of the image Related adjustment item:
|
in the upper-right of a page, it turns into 
and is registered as a bookmark.