[Image Blur Lead/Rear(2nd)]
Overview
Configure the setting to reduce occurrences of image blur.
This function is effective for image blur printed at the lead or rear edge of the back side of thick paper, etc.
Tips
- Make adjustments in order from [Leading Edge +1] and [Rear Edge +1] to suit the locations at which image blur occurred.
- The higher the "+" value in the setting item is, the fewer times image blur will occur. However, an image jitter may occur.
Tips
- [Lead/Rear Edge A+1] or [Lead/Rear Edge A+2] may increase image jitter depending on the paper type.
- If [Leading Edge +2], [Rear Edge +2], or [Lead/Rear Edge B+2] is selected, image jitter is likely to occur.
Setting Items
Setting item | Description |
|---|---|
[Reset] | Resets the settings. |
[Leading Edge +1] | Reduces occurrences of image blur at the lead edge of paper. |
[Leading Edge +2] | Keeps occurrences of image blur at the lead edge of paper below [Leading Edge +1]. |
[Rear Edge +1] | Reduces occurrences of image blur at the rear edge of paper. |
[Rear Edge +2] | Reduces occurrences of image blur at the rear edge of paper below [Rear Edge +1]. |
[Lead/Rear Edge A+1] | Mainly adjusts the pressure amount to reduce occurrences of image blur at the lead or rear edge of paper. |
[Lead/Rear Edge A+2] | Keeps occurrences of image blur at the lead or rear edge of paper below [Lead/Rear Edge A+1]. |
[Lead/Rear Edge B+1] | Mainly adjusts the pressure amount to reduce occurrences of image blur at the lead or rear edge of paper. |
[Lead/Rear Edge B+2] | Keeps occurrences of image blur at the lead or rear edge of paper below [Lead/Rear Edge B+1]. |
in the upper-right of a page, it turns into 
and is registered as a bookmark.