[Image Jitter(Lead Edge150mm)]
Overview
Configure the setting to reduce occurrences of thin line and character jitter.
This function is effective for thin line and character jitter that occurs near 150 mm / 59.055" from the lead edge of paper.
If image jitter occurs near 150 mm / 59.055" from the lead edge of paper even after [Image Jitter] was performed, use [Image Jitter(Lead Edge150mm)] to make adjustments.
Tips
- Make adjustments in order from [Improvement+1].
- The higher the "+" value in the setting item is, the fewer times thin line and character jitter will occur near 150 mm / 59.055" from the lead edge. However, image jitter may occur at a position other than near 150 mm / 59.055" from the lead edge of paper depending on the paper type.
Setting Items
Setting item | Description |
|---|---|
[Reset] | Resets the settings. |
[Improvement+1] | Reduces occurrences of thin line and character jitter. |
[Improvement+2] | Reduces occurrences of thin line and character jitter compared to [Improvement+1]. |
in the upper-right of a page, it turns into 
and is registered as a bookmark.