Home ApplicationOperate on the Tone Curve Adjustment screen

Operate on the [Tone Curve Adjustment] screen

This section describes basic operation of [Tone Curve Adjustment] screen. The color tone that is displayed on the display may differ slightly from the color tone that is actually output.

  1. Select the sample picture to confirm the conditions where the tone curve is adopted.

  2. Confirm the sample picture displayed at [Before Adjustment] and [After Adjustment].

  3. Load the tone curve to make adjustment. Or, create the new tone curve.

  4. Adjust the tone curve.

  5. Save the adjusted tone curve.

  6. If necessary, execute some management operations for the tone curve.

  7. If necessary, reset the tone curve.