[Advanced Options] Window

[Paper Size]

All paper sizes available in this machine

Set a paper size.

[Print Quality]

[600dpi], [1200dpi]

Set a resolution.

[Scaling]

1 to 1000%

Set an enlarge or reduce ratio.

[TrueType Font]

[Substitute with Device Font], [Download as Softfont]

Set an output method of a TrueType font.

[Advanced Printing Features]

[Enabled], [Disabled]

Set this to enable the [Pages per Sheet Layout] function.

[Pages per Sheet Layout]

[Right then Down], [Down then Right], [Left then Down], [Down then Left]

Set this to enable the [Pages per Sheet Layout] function.

[PostScript Output Option]

[Optimize for Speed], [Optimize for Portability], [Encapsulated PostScript (EPS)], [Archive Format]

Set an output option for PostScript. For details, refer to the PostScript guide.

[TrueType Font Download Option]

[Automatic], [Outline], [Bitmap], [Native TrueType]

Set an download option for a TrueType font.

[PostScript Language Level]

1 to 3

Set a PostScript language level.

[Send PostScript Error Handler]

[Yes], [No]

Set whether to send a PostScript error handler or not.

[Mirrored Output]

[Yes], [No]

Set [Mirrored Output].

[Negative Output]

[Yes], [No]

Set [Negative Output].

[Banner Tray]

[Off], [Auto], [Tray 1] to [Tray 5], [Bypass Tray]

Select a tray to print banner pages.

[Screening (Image)]

[Screen 1], [Screen 2], [Stochastic]

Selects screen group set for image object. The screen type set in Custom Screen (*) on the [touch panel] of the main body is assigned to the selected screen group. Also, image reproducibility changes by screens. Select a screen suitable for the required image quality.

• This manual includes the pages which describe how to change the screens. For details, refer to Image Quality.

[Screening (Text/Graphics)]

[Screen1], [Screen2], [Same as Screening(Image)]

Selects screen group set for text and graphic object. The screen type set in Custom Screen (*) on the [touch panel] of the main body is assigned to the selected screen group. Also, text and graphic reproducibility changes by screens. Select a screen suitable for the required image quality.

• This manual includes the pages which describe how to change the screens. For details, refer to Image Quality.

[Feed Direction]

[Auto], [Long Edge], [Short Edge]

Set a direction to feed paper.

[Offset]

[Off], [On]

Stagger after each set of copies specified.

[Print Position Setting]

[Off], [Left], [Center], [Right]

Set the print position.

[Paper Weight]

[No Setting],

[40-49] g/m²,

[50-54] g/m²,

[55-61] g/m²,

[62-74] g/m²,

[75-80] g/m²,

[81-91] g/m²,

[92-105] g/m²,

[106-135] g/m²,

[136-162] g/m²,

[163-216] g/m²,

[217-256] g/m²,

[257-300] g/m², ,

[301-350] g/m²,

Set weight of print paper.

(When the weight unit is g/m²)

[Paper Color]

[No Setting], [White], [Blue], [Goldenrod], [Gray], [Green], [Ivory], [Orange], [Pink], [Red], [Yellow], [Cream], [Clear White], [Others], [User Color]

Set the color of print paper.

[Pre-Punched]

[Off], [On]

Set this to print on pre-punched paper.

[Output Tray]

[Auto], [Stapler Main Tray], [Stapler Sub Tray].

Select an output tray.

[Output Order]

[Face Down], [Face Up]

Select whether to output printed paper with its face up or down.

[N to 1]

[Off], [On]

Set this to print an original in a reverse order.

[Binding Position]

[Left Bind], [Top Bind], [Right Bind], [Left Bind], [Top Bind], [Right Bind]

Set a position to bind when using a function such as [Staple] and [Punch].

[2-Sided]

[Off], [On]

Set whether to print in 2-sided mode.

[Imposition]

[Off], [Booklet], [Adhesive Binding], [2 in 1], [2 Repeat], [2 Repeat Reversal (Left)], [2 Repeat Reversal (Right)], [2 Repeat Reversal (Top)], [2 Repeat Reversal (Bottom)], [4 Repeat], [4 in 1 (Vertical Order)], [4 in 1 (Horizontal Order)] ,[8 Repeat]

Set this to perform an imposition printing.

[Book Spread]

[Off], [On]

Prints original pages of different paper sizes in book spread for a booklet.

[Staple]

[Off], [Left Corner], [Right Corner], [2 Positions (Wide)], [2 Positions (Narrow)], [2 Positions (Narrow+)]

Set this when stapling.

[Punch]

[Off], [2-Hole], [3-Hole], [4-Hole], [Multi Punch]

Set this to punch paper.

[Fold]

[Off], [Z-Fold], [Fold & Staple], [Multi Tri-Fold - Inside], [Multi Tri-Fold - Outside], [Multi-Half-Fold - Inside], [Multi-Half-Fold - Outside]

Set the fold function.
[Fold & Staple] provides two options: [2 positions] and [4 positions].

[Image Shift]

[Off], [On]

Select whether to use image shift.

[Front Cover]

[Off], [Print], [Blank]

Set this to add the front cover.

[Front Cover Tray]

[Off], [Tray 1] to [Tray 5], [Bypass Tray]

Select a tray to feed paper to be used as the front cover.

[Back Cover]

[Off], [Print], [Blank]

Set this to add a back cover.

[Back Cover Tray]

[Off], [Tray 1] to [Tray 5], [Bypass Tray]

Select a tray for a back cover.

[PI Front Cover Tray]

[Off], [PI Tray 1], [PI Tray 2]

Set this to print a front cover on paper that is different with the output paper, such as thick paper.

[PI Back Cover Tray]

[Off], [PI Tray 1], [PI Tray 2]

Set this to print a back cover on paper that is different with the output paper, such as thick paper.

[Print Mode]

[Print], [Wait Mode], [Proof Print], [Proof Print (1st Sheet)], [Hold Job], [Hold Job and Print], [Spool]

Set a print method.

When the [Print] is selected, the print job is printed without it being stored in the HDD.

When [Wait Mode] is selected, the print job is saved as an output-reserved job. To output such a print job, press Start on the control panel of this machine.

When [Proof Print] is selected, the print job is printed only partially, and you can view the print image. This function is helpful for sample printing.

When [Proof Print (1st Sheet)] is selected, the print job is printed only by the first page, and you can view the print image. This function is helpful for sample printing.

When [Hold Job] is selected, the print job is held on this machine.

When [Hold Job and Print] is selected, the print job is held on this machine while it is being printed.

When [Spool] is selected, the print job is saved in the HDD in the machine temporarily, and then printed.

It can prevent the intermittent printing that may be observed when printing jobs with a lot of pictures, etc.

For details about [Hold Job] and [Hold Job and Print], refer to Performing Hold and HDD Store for Print Job.

[Smoothing]

[Off], [On]

When selecting [On], you can smoothly print the text with density of 100%, such as K=100% and outline of line drawing.

[Thinning]

[Off], [On]

Select this to control the boldness of the text or line images. This setting also has an effect on white characters on a colored background.

[Emphasis]

[Off], [On]

Set this to enable the outline emphasizing function.

[Outline Settings]

[Off], [Text/Graphics], [Text/Graphics/Image]

The outline of text in gray and figures are printed sharply.

[1 Dot Line Emphasis]

[Off], [On]

Select this to emphasis an ultrafine line.

[Use CIE Color]

[Off], [On] , [Default]

Uses a CIE color space (**). When [Use CIE Color] is turned [On], the gradation will be better than [Off] since the printing is processed via the color space defined by CIE, the International Commission on Illumination.

[Date/Time]

[Off], [All Pages], [1st Page Only]

Set this to print date/time.

[Color Bar]

[Off], [Left], [Top], [Right], [Bottom], [Image Controller Default]

Set a print position for [Color Bar].

[Color Settings Information]

[Off], [Left], [Top], [Right], [Bottom], [Image Controller Default]

Set the print position for [Color Settings Information].

[Number of Lines]

1 to 5

Set the number of lines for [Color Settings Information].

[Copy Protect]

[Off], [On]

Set this to print data in copy protect mode.

[Preset Stamp]

[Off], [Copy], [Invalid], [Illegal Copy], [Invalid Copy]

Select words to be printed in [Preset Stamp].

[Back Pattern]

[Off], [Cherry Blossoms], [Arabesque], [Lattice]

Select a background pattern to be printed in [Copy Protect].

[Image Density Selection]

[Normal], [+1], [-1] to [-5], [Toner Save], [Draft Print]

Specify the print density. Move the slider toward plus to deepen the density and move the slider toward minus to lighten the density.

[Toner Print] corresponds with [Image Density Selection] - [-2] and [Draft Print] corresponds with [-4].

[180° Rotate]

[Off], [On]

Select On to rotate the document 180° to print.

[Tandem Mode]

[Off], [On]

When printing multiple copies of a document, connect two printers in parallel to divide copies for printing.
This function reduces the time required for printing when you want to print a large number of copies.

• Before using this function, connect two printers in tandem mode to set them as the master and sub machines respectively.

• For details, contact your service representative.

[Ring Binding]

[Off], [On]

Set this to bind the printed paper using ring-shaped binder.

[Printed Side for Top Sheet]

[Inside], [Outside]

Select whether to place the printed side of the top sheet outside or inside.

[Printed Side for Last Sheet]

[Inside], [Outside]

Select whether to place the printed side of the last sheet outside or inside.

[Printed Items - Use CIE Color]

[Off], [On]

Select this to print [Use CIE Color] for [Color Settings Information].

[Printed Items - Date/Time]

[Off], [On]

Set this to print [Date/Time] for [Color Settings Information].

[Printed Items - Job Name]

[Off], [On]

Set this to print [Job Name] for [Color Settings Information].

[Printed Items - User Name]

[Off], [On]

Set this to print [User Name] for [Color Settings Information].

[Printed Items -Printer Name/Model Name]

[Off], [On]

Set this to print [Printer Name/Model Name] for [Color Settings Information].

[Printed Items - ROM Version]

[Off], [On]

Set this to print [ROM Version] for [Color Settings Information].

[Printed Items - Tone Curve Name]

[Off], [On]

Set this to print [Tone Curve Name] for [Color Settings Information].

[Printed Items - Screening]

[Off], [On]

Set this to print [Screening] for [Color Settings Information].

[Printed Items - Comment]

[Off], [On]

A comment can be printed for up to 200 characters in [Color Settings Information].