Paper Size Available for Use
|
Paper trays |
Available sizes |
|
|---|---|---|
|
Main Body Tray |
Standard: SRA3 Custom: Widthwise 182 mm to 324 mm, Lengthwise 139 mm to 463 mm / Widthwise 7.17" to 12.76", Lengthwise 5.47" to 18.23" Tab paper: A4T Detectable standard sizes can be switched as follows.*3 •A5 •SRA3 •8.5 Other than the above mentioned, the following standard sizes can be switched when the machine is set to use K sizes in the Administrator Setting provided on the [UTILITY] screen. •B4 |
|
|
Paper Feeder Unit PF-709 |
Standard: SRA3 Custom: Widthwise 182 mm to 324 mm, Lengthwise 139 mm to 463 mm / Widthwise 7.17" to 12.76", Lengthwise 5.47" to 18.23" Using small size guides: Min. Widthwise 95 mm, Lengthwise 139 mm / Widthwise 3.74", Lengthwise 5.47" Tab paper: A4T Detectable standard sizes can be switched as follows.*3 •A5 •SRA3 •8.5 Other than the above mentioned, the following standard sizes can be switched when the machine is set to use K sizes in the Administrator Setting provided on the [UTILITY] screen. •B4 |
|
|
Large Capacity Unit LU-411 |
Standard: A4 Custom: Widthwise 250 mm to 314 mm, Lengthwise 176 mm to 229 mm / Widthwise 9.84" to 12.36", Lengthwise 6.93" to 9.02" Tab paper: A4T |
|
|
Large Capacity Unit LU-412 |
Standard: SRA3 Custom: Widthwise 203 mm to 324 mm, Lengthwise 195 mm to 483 mm / Widthwise 7.99" to 12.76", Lengthwise 7.68" to 19.02" Tab paper: A4T |
|
|
Multi Bypass Tray Unit MB-507 |
Standard: SRA3 Custom: Widthwise 100 mm to 324 mm, Lengthwise 148 mm to 483 mm / Widthwise 3.94" to 12.76", Lengthwise 5.83" to 19.02" Tab paper: A4T Detectable standard sizes can be switched as follows.*3 •A5 •SRA4 •8.5 Other than the above mentioned, the following standard sizes can be switched when the machine is set to use K sizes in the Administrator Setting provided on the [UTILITY] screen. •(B4 |
|
|
Post Inserter PI-502 (equipped in Finisher FS-532 as option) |
Upper tray |
Standard: A4 Custom: Widthwise 182 mm to 331 mm, Lengthwise 139 mm to 297 mm / Widthwise 7.17" to 13.03", Lengthwise 5.47" to 11.69" Detectable standard sizes can be switched as follows.*3 •A5 •A4 •8.5 The 3rd option above mentioned changes as follows when the machine is set to use K sizes in the Administrator Setting provided on the [UTILITY] screen. •B5 |
|
Lower tray |
Standard: A3 Custom: Widthwise 182 mm to 331 mm, Lengthwise 139 mm to 488 mm / Widthwise 7.17" to 13.03", Lengthwise 5.47" to 19.21" Detectable standard sizes can be switched as follows.*3 •A5 •SRA4 •8.5 The 4th option above mentioned changes as follows when the machine is set to use K sizes in the Administrator Setting provided on the [UTILITY] screen. •(B4 |
|
*1: B series is set to JIS or ISO standard sizes as the default setting. This setting depends on the destination. For JIS/ISO switching, contact your service representative.
*2: Selection of K sizes can be enabled in the Administrator Setting provided on the [UTILITY] screen. For details, refer to K Size: Selecting Whether or Not to Use K Size Paper.
*3: For details about how to switch [Detect Size Setting], refer to Paper Setting: Setting Paper for Tray.
|
Equipment |
Available sizes |
|
|---|---|---|
|
Main Body |
Standard: SRA3 Custom: Widthwise 95 mm to 324 mm, Lengthwise 139 mm to 483 mm / Widthwise 3.74" to 12.76", Lengthwise 5.47" to 19.02" Tab paper: A4T |
|
|
Finisher FS-532 |
Secondary (sub) tray |
Standard: A3 Custom: Widthwise 95 mm to 324 mm, Lengthwise 139 mm to 483 mm / Widthwise 3.74" to 12.76", Lengthwise 5.47" to 19.02" Tab paper (only with the tab side ahead in output direction) |
|
Primary (main) tray (non-Staple) |
Standard: A3 Custom: Widthwise 95 mm to 324 mm, Lengthwise 139 mm to 483 mm / Widthwise 3.74" to 12.76", Lengthwise 5.47" to 19.02" Tab paper (only with the tab side ahead in output direction) Straight only: 13 |
|
|
Primary (main) tray (Staple) |
Standard: SRA3 Custom: Widthwise 203 mm to 324 mm, Lengthwise 139 mm to 483 mm / Widthwise 7.99" to 12.76" *, Lengthwise 5.47" to 19.02" *: Max. 320 mm / 12.60'' in length for parallel staple at the rear corner. Tab paper (only with the tab side ahead in output direction) |
|
|
Punch Kit PK-522 mounted |
•2 holes Standard: A3 •3 holes Standard: A3 •4 holes Standard: A3 |
|
|
Saddle Stitcher SD-510 mounted |
•Fold & Staple Standard: A3 Custom: Widthwise 120 mm to 324 mm, Lengthwise 240 mm to 483 mm / Widthwise 4.72" to 12.76", Lengthwise 9.45" to 19.02" •Multi Half-Fold Standard: A3 Custom: Widthwise 120 mm to 324 mm, Lengthwise 240 mm to 483 mm / Widthwise 4.72" to 12.76", Lengthwise 9.45" to 19.02" •Multi Tri-Fold A4 |
|
|
Z-Folding Unit ZU-608 |
Punch function |
•2 holes Standard: A3 •3 holes Standard: A3 •4 holes Standard: A3 |
|
Fold function |
A3 |
|
|
Multi Puncher GP-501 |
Punch: 8.5 Bypass: Widthwise 95 mm to 330 mm, Lengthwise 139 mm to 488 mm / Widthwise 3.74" to 12.99", Lengthwise 5.47" to 19.21" |
|
|
Auto Ring Binder GP-502 |
Standard: 8.5 Tab Paper: 8.5 Bypass: Widthwise 95 mm to 330 mm, Lengthwise 139 mm to 488 mm / Widthwise 3.74" to 12.99", Lengthwise 5.47" to 19.21" |
|
|
Output Tray OT-507 |
Widthwise 95 mm to 324 mm, Lengthwise 139 mm to 463 mm / Widthwise 3.74" to 12.76", Lengthwise 5.47" to 18.23" |
|
|
Output Tray OT-510 |
Standard: A3 Custom: Widthwise 95 mm to 331 mm, Lengthwise 133 mm to 488 mm / Widthwise 3.74" to 13.03", Lengthwise 5.24" to 19.21" Tab paper (only with the tab side ahead in output direction) Straight only: 13 |
|
|
Output Tray OT-512 |
Sort/Group |
Standard: SRA3 Custom: Widthwise 95 mm to 331 mm, Lengthwise 133 mm to 487.7 mm / Widthwise 3.74" to 13.03", Lengthwise 5.24" to 19.2" Fixed tab paper (back edge of tab during output is not guaranteed) Wide paper |
|
Offset Sort/Offset Group |
Standard: SRA3 Custom: Widthwise 148 mm to 331 mm, Lengthwise 133 mm to 487.7 mm / Widthwise 5.83" to 13.03", Lengthwise 5.24" to 19.2" Fixed tab paper (back edge of tab during output is not guaranteed) Wide paper |
|
|
Relay Unit RU-518 |
Standard: SRA3 Custom: Widthwise 95 mm to 330.2 mm, Lengthwise 133 mm to 487.7 mm / Widthwise 3.74" to 13", Lengthwise 5.23" to 19.2" Tab paper (only with the tab side ahead in output direction) |
|