Home ApplicationSetting Up Remote Panel / Remote Monitor / Multi Monitor

Setting Up Remote Panel / Remote Monitor / Multi Monitor

  1. Display the [Main page] screen of Web Utilities.

  2. Click on [Machine Manager Setting].

    The password entry dialog box is displayed.

  3. Enter "admin" in the User Name text box, and the 8-character administrator password in the password text box, then click on [OK].

    The [Machine Manager Setting ] screen is displayed.

  4. Click on [Remote Panel Setting/Job History Setting].

    The [Remote panel setting/Job history setting] screen is displayed.

  5. Make settings for Remote Panel.

    • Specify the IP address of the computer to be used for the remote panel. Up to 3 addresses can be specified.

    • If you do not make settings other than this setting, click [Registration] at the bottom of the window, and then click on [Administrator Setup Menu].

  6. Make settings for Remote Monitor.

    • Enter the user label for the Remote Monitor, and select the desired refresh interval.

    • If you do not make settings other than this setting, click [Registration] at the bottom of the window, and then click on [Administrator Setup Menu].

  7. Make settings for Multi Monitor.

    • Up to 10 machines to be displayed on Multi Monitor can be registered.

    • When Image Controller IC-602 has been mounted, enter the IP address and port number.
      (ex) If the IP address of the machine is 192.168.1.20, enter "192.168.1.20:30091."

    • When Image Controller IC-308 or Image Controller IC-310 has been mounted, enter the IP address.
      (ex) If the IP address of the machine is 192.168.1.20, enter "192.168.1.20."

    • Select either to display the multi monitor at the top of the remote panel or on the left side of the remote panel.

    • If you do not make settings other than this setting, click [Registration] at the bottom of the window, and then click on [Administrator Setup Menu].

  8. Click [Register].

    The [Registered as follows] screen is displayed. The new data is registered to the machine immediately.

  9. Click on [Administrator Setup Menu].

    The screen returns to the [Machine Manager Setting] screen.