[Failed to connect to server.]

The network cable is not connected correctly.

Make sure that the network cable is correctly connected.

Under Administrator Settings, [Network] is not set correctly.

Under Administrator Settings, check that [Network] is set correctly.

[Cannot select address for TX. Exceeded the maximum number of addresses allowed for broadcasting]

The number of destinations specified exceeds the number possible for a broadcast transmission.

Reduce the number of broadcast destinations, or send the transmission in multiple batches.

[Document could not be saved in User Box. Insufficient Storage memory. Please check Job History.]

The storage is full.

Delete unnecessary data, then try saving the data again.

[No. of User Boxes has reached the maximum.]

The number of User Box that can be registered has reached the maximum number possible.

Delete unnecessary User Boxes then retry registration.

[The number of documents in the box has reached the maximum limit. No additional documents can be stored.]

The number of documents that can be saved in a User Box has reached the maximum number possible.

Delete unnecessary documents then retry registration.

[The maximum number of pages that can be registered in the User Box has been reached.]

The registered document pages have reached the maximum that can be registered in one User Box.

Delete unnecessary documents then retry registration.

[The number of programmed jobs has reachedthe maximum allowance. Please wait untila programmed job has been completed.]

The number of jobs that can be programmed has reached the maximum number possible.

Wait until a job has been completed, or delete a current job.