Sending a Fax with a Password ([Password TX])

The Password TX is a function that sends a fax with a password. It is used to send faxes to a device on which fax peers are restricted by passwords (a device with Closed Network RX enabled).

Tips

• You can only use this function to communicate with our models supporting the closed network reception (password) function.
• You need to check the recipient's closed network reception password beforehand.
• This function cannot be used together with the following functions.
  Relay Distribution, Confidential Communication, Polling TX, Polling TX (Bulletin Board), Polling RX, Polling RX (Bulletin Board)

Reference

• Restricting Communication Peers by Password (Closed Network RX)

1

Load the original.

2

Display the Fax screen of classic style.

3

Specify the destination.

4

Tap [Application] - [Fax Setting] - [Password TX], and tap [ON].

5

Enter the Closed Network RX password of the destination, and tap [OK].

6

Use the Start key to start transmission.