Sending a Confidential Fax ([F-Code TX])

The confidential communication function is designed for communications with specific people using a Confidential User Box that requires a registered number and a password.

This ensures fax communications are sent with enhanced security.

Tips

• The destination fax needs to have the F-code function.
• You need to check the recipient's Confidential User Box number and the password for confidential fax reception.
• This function cannot be used together with the following functions.
  Password TX, Polling TX, Polling TX (Bulletin Board), Polling RX, Polling RX (Bulletin Board)

Related setting (for the administrator)

• [Utility] - [Administrator] - [Fax Settings] - [Function Setting] - [Function ON/OFF Setting] - [F-Code TX]

1

Load the original.

2

Display the Fax screen of classic style.

3

Specify the destination.

4

Tap [Application] - [Fax Setting] - [F-Code TX], and tap [ON].

5

Enter the [SUB Address] and [Sender ID], and tap [OK].

• [SUB Address]: Enter the Confidential User Box number.

• [Sender ID]: Enter the communication password for confidential RX.

6

Use the Start key to start transmission.