Scan

A. Yes. You can register frequently used destinations in the address book.

You can also put a number of one-touch destinations in one group and register them as a group.

Once you have registered a one-touch or group destination, you can recall it by simply tapping the assigned key.

For details on how to register a one-touch destination, refer to Registering Address Book.

For details on how to register a group destination, refer to Registering a Group.

Tips

• You can register up to 1000 one-touch destinations in the address book.
• You can register up to 100 group destinations in the address book.
• To register a group destination, members must have been registered as one-touch destinations.

A. Register a one-touch destination for SMB transmission beforehand, or directly enter the destination for SMB transmission when scanning the original. For details about the SMB transmission function, refer to How to Use SMB Send.

A. The cause varies depending on the displayed error message. Take corrective actions by referring to SMB Transmission Errors.

A. Yes, you can.

Simply specify an E-mail address for the destination, and you can send the data as an attachment. For details about the E-mail transmission function, refer to How to Use Scan to E-mail.

A. Yes. To do so, use the SMB Send function that can send scanned data to a location on the specified computer. Register a one-touch destination for SMB transmission beforehand, or directly enter the destination for SMB transmission when scanning the original. For details about the SMB transmission function, refer to How to Use SMB Send.

A. Check the settings for the FTP destination on this machine and the settings on the FTP server side.

Check for the following items:

If the problem cannot be solved even after checking for the above points, contact your administrator.

A. Yes, you can.

When specifying destinations from the registered ones, select all the address books you want to set to destinations. It eases the operation to register a group that contains a number of destinations beforehand. For details on the operation procedure, refer to Using Address Book.

When directly entering destination information, enter destination information, and tap [OK]. Then, tap [+] and enter the following destination information. For details on the operation procedure, refer to Directly entering the destination.

The maximum number of destinations that you can specify for a single transmission depends on how the destinations are set.

Tips

• To specify multiple destinations, [Select multiple destinations] must be set to [Allow] in [Utility] - [Administrator] - [Security] - [Restrict User Access].
• To specify the entire group of the group destination, [Select all Groups] must be set to [Allow] in [Utility] - [Administrator] - [Security] - [Restrict User Access].
• When registering a group, even destinations of different types can be registered in one group.

A. Select [Utility] - [Utility] - [Customize] - [Fax/Scan Settings (Classic style)], then set [Default Address Sort Method] to [Name] (default: [Name]).

This setting is only applied to the classic-style screens.

A. Yes. Register this machine in the exception setting for firewall.

For details on the operation procedure, refer to Setting Firewall Exception (When You Are Using a Firewall).

A. Using the Separate Scan function, you can collect the original pages scanned in several batches as a single file. Also, you can insert an additional original into the current original and scan both of them as a single file.

For details on the operation procedure, refer to Scanning a number of originals in several batches ([Separate Scan]).

A. Yes. You can check the transmission log for scanning in the job history.

See job history to quickly check names of scanned documents, scan dates and scan results (success/failure) among others.

Tap [Job List], and check the transmission log in the [Log] tab. Select a log, then tap [Details..] to check the log details. You can narrow down logs to display using [Select Job Type] or [Limitation Filter].

A. Before changing, select [Utility] - [Administrator] - [System Settings] - [Change Permission for Default Value Setting], and set [Change Permission for Default Value] to ON.

Change the setting value of [File Type] to the file type used as the default on the Scan screen, and select [Set the current setting value to Default value] from the menu icon.

A. Yes, you can set a color mode and file format.

When setting a color mode, select [Color] on the Scan screen, and select the desired color mode. On this machine, the following color modes are supported.

When setting a file format, select [File Type] on the Scan screen, and select the desired file format. The following file formats are supported on this machine.

Tips

• The settings marked by an asterisk "*" are available only in classic style.

A. Yes. You can scan data with the date and time, page numbers, or a stamp in Application of classic style.

To add the date and time, tap [Date/Time] in [Application] of scan mode of classic style, and set [Date Format], [Time Format], and [Pages].

To add page numbers, tap [Page Number] in [Application] of scan mode of classic style, and set [Page Number Type] and [Starting Page Number]. If you have selected [Chapter Page] for [Page Number Type], specify the chapter number to start printing in [Starting Chapter Number].

To add a stamp, tap [Stamp] in [Application] of scan mode of classic style, and set [Stamp Imprint] and [Pages].

If the date/time, page number, and stamp are difficult to see with the default settings, tap [Text Details] on each of the [Date/Time], [Page Number], and [Stamp] setting screens; you can set the text size and font type. If the date and time, page numbers or stamp are over the text of the original, tap [Print Position] in each of the [Date/Time], [Page Number] and [Stamp] setting screens to set the printing positions.

Reference

• If necessary, you can register any stamp in addition to the stamps pre-registered in this machine. The registration procedure is explained using the data management utility in Web Connection. For details, refer to Managing the Stamp Data.

A. You can either set the resolution (granularity) when the original is scanned or set the image quality according to the quality of the original.

When setting the resolution, select [Resolution] on the Scan screen, and select the desired resolution. The greater the value, the finer granularity is achieved for the image.

When setting the image quality, select [Original Type] on the Scan screen, and select the image quality that matches the contents of the original to be scanned.

A. The types of files that can be saved are TIFF, JPEG, PDF, Compact PDF, XPS, Compact XPS and PPTX.

An image saved as a TIFF or JPEG file can be viewed using a general image browsing application.

To view an image saved as a PDF or Compact PDF, install Adobe Reader. Adobe Reader can be downloaded without charge from the Adobe website.

To view an image saved as an XPS or Compact XPS, install XPS Viewer. XPS Viewer has automatically been installed if Microsoft .NET Framework 3.0 or later has been installed on your computer.

Microsoft .NET Framework can be downloaded without charge from the Microsoft website.

To view an image saved as a PPTX file, Microsoft Power Point must be installed.

Tips

• XPS and Compact XPS are only available in classic style.

A. You can adjust the density of the background color for clean scanning.

Select [Bkgd.Removal] on the Scan screen. Select [Bleed Removal] in [Background Removal], set the back bleeding level, and tap [OK]. Set to [Auto] to have this machine automatically adjust the bleed level.

A. Yes. Enable the frame erase function, and the machine scans the original by erasing unwanted sections on the four sides of the original.

Tap [Frame Erase] in [Application] of scan mode of classic style. To erase all of the four sides of the original by the same width, set [Frame] to ON, and specify the width to be erased. To specify the width of the frame to be erased individually, set [Frame] to OFF, select a target side, then specify the width to be erased. When specifying the erase width individually, you can set to exclude a side from erasing by selecting the side and canceling the setting of [Erase] for that side.

A. Select [Utility] - [Administrator] - [System Settings] - [Reset Settings] - [Job Reset] - [Reset when originals are loaded in ADF], and select [Do Not Reset].

A. No. You cannot use the scanning function via network connection with a USB cable. Use a LAN cable for network connection.

However, you can connect a USB memory to the USB Port of this machine to save scanned data to the USB memory. For details on how to save scanned data to USB memory, refer to Saving the Scanned Original Data to a USB Flash Drive.