Loading Banner Paper Into the Large Capacity Unit LU-208XL

Load banner paper into Large Capacity Unit LU-208XL.

When loading paper of different specifications, change the paper setting of the large capacity unit.

For details about the paper setting, refer to [Paper Setting].

NOTICE

• If the machine is not powered on, the Tray bottom plate will not work. Turn the Sub power switch on. For details, refer to Turning This System On.

If any failures in the paper feed occur due to the type, size or weight of the paper being used, as shown in the figure below, attaching the provided weights to the pick-up roller may help improve the paper feed performance. Adjust by changing the number of weights. When loading banner paper of weight over 257 g/m² / 69 lb Bond and length up to 539 mm / 21.22" into the Large Capacity Unit LU-208XL, attach 1 weight plate (large) in advance, and the number of weight plates.

1

Open the Top door (left) and the Top door (right).

The Tray bottom plate goes down.

Proceed to Step 6 when loading paper of the same size.

Proceed to Step 2 when loading the paper of different sizes.

2

Rotate the Side guide knobs (4 locations) of the Side guides (left) and the Side guide knobs (2 locations) of the Side guides (right) counterclockwise to loosen them.

3

Move the Side guides (left) and Side guides (right) according to the Paper size indicator on the top of each guide plate.

4

Rotate the Side guide knobs (4 locations) of the Side guides (left) and the Side guide knobs (2 locations) of the Side guides (right) clockwise to lock them.

• Adjust the positions of the Side guides (left) and the Side guides (right) such that they do not deviate.

5

Adjust the position of Rear guide.

• While holding down the Rear edge guide lock release lever, move the Rear guide according to the Paper size indicator of the Tray bottom plate.

6

Load the paper with the print side facing up.

7

Press the Tray bottom plate lowering button.

NOTICE

• If the machine is not powered on, the tray will not work even when you press the Tray bottom plate lowering button.
• The number of loadable banner sheets is limited to 1,000 sheets for plain paper or 500 sheets (128 g/m²/ 34 lb Bond) for coated paper.

8

Continue to load the paper.

NOTICE

• Exercise care not to exceed the lines of paper upper limit label displayed on Side guides (left) when loading the paper.
• Check that the Rear guide are aligned to the loaded paper. If there is a gap between the Rear guide and paper or the gap is too narrow, it may lead to paper jams and malfunctions.
• If too many sheets of paper are loaded, the display of remaining papers is "" even if Top door (right) and Top door (left) are closed. Reduce the amount of banner paper to be loaded as appropriate.

9

Close the Top door (right) and Top door (left).

10

The remaining paper amount indicator changes from "" to "".