Loading Tab Paper Into the Main body tray (Secondary (sub) tray)
Overview
Load tab paper into the Main body tray (Secondary (sub) tray).
Example: Insert 3 sheets of tab paper into 1 print set
Tray Loading Direction | How to Stack the Tab Paper | Print Set |
|---|---|---|
 |  |  |
A: Back side B: Front side | A: Side printed or to be printed (downward) B: 1st tab paper C: 2nd tab paper D: 3rd tab paper | A: 1st tab paper B: 2nd tab paper C: 3rd tab paper D: 1-copy print set |
Example: Insert 3 sheets of tab paper into 3 print sets (total 9 sheets)
Tray Loading Direction | How to Stack the Tab Paper | Print Set |
|---|---|---|
 |  |  |
A: Back side B: Front side | A: Side printed or to be printed (downward) B: 1st tab paper C: 2nd tab paper D: 3rd tab paper | A: 1st tab paper B: 2nd tab paper C: 3rd tab paper D: 3-copy print set |
Tips
- There is a possibility that sheets of paper may stick together due to punch holes if tab paper with punch holes is used. To prevent multiple sheets being fed at once, flick through the stack by hand before loading the paper. For details about how to separate paper, refer to Paper Management.
- When loading tab paper into any tray, change the size setting of the tray to tab paper in Paper Setting. For details, refer to [Paper Size].
Procedure
1
Pull out the tray.
Pull out the tray for which tab paper is set.
2
Open the Feed roller.
3
Load the tab paper.
A: Back side, B: Front side
NOTICE
- Exercise care not to exceed the maximum stack height lines displayed on the tray Side guides when loading the paper.
4
Place the guide plate against the tab paper.
Load the tab paper so that it is aligned with the Feed roller side of the tray.
While holding down the Side guide lock release lever, place the Side guides in the front side against the tab paper, and while holding down the Rear edge guide lock release lever, place the Rear guide plate against the paper.
NOTICE
- Make sure that the Side guides and Rear guide plate are placed firmly against the paper. If there is a gap between the guide and the paper, the machine will not be able to properly detect the correct paper size, which may lead to a failure in the paper feeding device.
5
Firmly push the tray all the way in.
in the upper-right of a page, it turns into 
and is registered as a bookmark.