The Trimmer Unit TU-510 has different specifications depending on the production period. In this manual, the specifications are classified for explanation as follows. For details, contact your service representative.
The Trimmer Unit TU-504 has different specifications depending on the production period. In this manual, the specifications are classified for explanation as follows. For details, contact your service representative.
The Perforation Unit PE-101 / Perforation Unit PE-102 has different specifications depending on the production period. In this manual, the specifications are classified for explanation as follows. For details, contact your service representative.
Name | Trimmer Unit TU-510 | |
Type | Four-edge trimmer | |
Function | Through-path | Conveys paper to post-processing device without processing. |
Slit | Trims the top and bottom of paper in the paper feed direction. | |
Cut (CD trimming) | Trims paper in the paper crosswise direction. | |
Four Edge Trim (Slit + Cut) | Trims the edge parts of paper in the paper feed direction and paper crosswise direction. | |
Multiple Cutting (Slit + Cut) | Trims a single sheet of wide paper, and divides the paper into 2 sheets. | |
2-division mode (Slit + No cut) | Trims a single sheet of wide paper, and divides the paper into 2 sheets with slit + no cut. All the output processes (Offset, Staple, Punch, etc.) are available for the half-cut sheets. | |
Crease (Up Convex) (with Creaser Unit CR-103 mounted) | Attaches up-convex creases (folding lines) in the paper crosswise direction. | |
Crease (Down Convex) (with Creaser Unit CR-102 mounted) | Attaches down-convex creases (folding lines) in the paper crosswise direction. | |
Gutter Slit (with Trimmer Unit TU-504 mounted) | Slit the gutter parallel to the paper feed direction. | |
Perforation Cut (Horizontal) (with Perforation Unit PE-101 mounted) | Attaches a perforation in the paper feed direction. Performing reverse output allows you to transport and output the paper to the optional device in the next stage. This option is also available in Four Edge Trim, Multiple Cutting, or Half Trim mode. | |
Perforation Cut (Vertical) (with Perforation Unit PE-102 mounted) | Attaches a perforation in the paper crosswise direction. Performing reverse output allows you to transport and output the paper to the optional device in the next stage. This option is also available in Four Edge Trim, Multiple Cutting, or Half Trim mode. | |
Banner paper conveyance and reverse (with Banner Unit MK-764 mounted) | Corrects a banner paper skew and reversely conveys paper to the postprocessing device. | |
Invert conveyance | Reverses paper, and conveys it to the post-processing device. | |
Subtray output | Ejects to Secondary (sub) tray. | |
Stacks the sheets cut to card size (with Job Separator JS-507 mounted). | Stacks the sheets cut to card size in the dedicated tray. | |
* Each function can be used independently. | ||
Dimensions | 1,360 mm (W) e 747 mm (D) e 1,151 mm* (H) / 53.54" (W) e 29.41" (D) e 45.31"* (H) *: Maximum height, excluding the tray part. The top height is 1,020 mm / 40.16". | |
Weight | Approx. 272 kg / 599.66 lb Maximum mass including option: Approx. 328 kg / 723.12 lb | |
Power | Japan and Inch area: AC 100 V to 127 V, 50/60 Hz (supplied from power cord) Metric area: AC 220 V to 240 V, 50/60 Hz (supplied from power cord) DC 24 V, 5 V (partially supplied from the front stage) | |
Maximum power consumption | 900 W or less |
Paper size | Standard: SRA3 w, A3 w, B4 w, SRA4 w/v, A4 w/v, B5 w/v, A5 w/v, B6 w, A6 w, Postcard w*1, 7.25 e 10.5 w/v, 5.5 e 8.5 w/v, Foolscap*2, 8K w, 16K w/v Custom: Widthwise 95 mm to 330.2 mm, lengthwise 133 mm to 1,300 mm / Widthwise 3.74" to 13", lengthwise 5.24" to 51.18" Fixed tab paper (back edge of tab during output is not guaranteed) *1: Only in Japan. *2: Foolscap refers to 8.5 e 13 w, 8.25 e 13 w, 8.12 e 13.25 w, and 8 e 13 w sizes. |
Paper weight | 40 g/m2 to 450 g/m2 / 10 lb Bond to 119 lb Bond * Paper of lengthwise 487.8 mm to 1,300 mm / 19.20" to 51.18" is limited to 128 g/m2 to 300 g/m2 / 33 lb Bond to 81 lb Bond. |
Paper size | Custom: Widthwise 140 mm to 330.2 mm, lengthwise 153 mm to 1,300 mm / Widthwise 5.51" to 13", lengthwise 6.02" to 51.18" * Banner Unit MK-764 is required for paper of lengthwise 487.8 mm / 19.20" or larger. After slitting, the width must be 120 mm / 4.72" or more. |
Paper weight | 50 g/m2 to 400 g/m2 / 14 lb Bond to 106 lb Bond |
Slit range | 50 g/m2 to 64 g/m2 / 14 lb Bond to 17 lb Bond: 10 mm to 30 mm / 0.39" to 1.18" 65 g/m2 to 400 g/m2 / 18 lb Bond to 106 lb Bond: 8 mm to 30 mm / 0.31" to 1.18" |
Setting units | 0.1 mm / 0.004" |
Slit independent setting | The slit width at the top or bottom can be set individually. However, the difference in cut size should be within 10 mm / 0.39". Only one-side cutting is not possible. |
Paper size | Custom: Widthwise 140 mm to 330.2 mm, lengthwise 153 mm to 1,300 mm / Widthwise 5.51" to 13", lengthwise 6.02" to 51.18" * Banner Unit MK-764 is required for paper of lengthwise 487.8 mm / 19.20" or larger. After CD cutting, the length must be 133 mm / 5.24" or more. |
Paper weight | 50 g/m2 to 400 g/m2 / 14 lb Bond to 106 lb Bond |
Cut range |
|
Paper size | Widthwise 140 mm to 330.2 mm, lengthwise 153 mm to 1,300 mm / Widthwise 5.51" to 13", lengthwise 6.02" to 51.18" * Banner Unit MK-764 is required for paper of lengthwise 487.8 mm / 19.20" or larger. |
Paper weight | 50 g/m2 to 400 g/m2 / 14 lb Bond to 106 lb Bond * Paper of lengthwise 487.8 mm / 19.20" or more is limited to 128 g/m2 to 300 g/m2 / 33 lb Bond to 81 lb Bond. |
Top/bottom slit | 50 g/m2 to 64 g/m2 / 14 lb Bond to 17 lb Bond: 0 mm / 0" or 10 mm to 30 mm / 0.39" to 1.18" 64.1 g/m2 to 400 g/m2 / 17 lb Bond to 106 lb Bond: 0 mm / 0" or 8 mm to 30 mm / 0.31" to 1.18" * The difference between the cutting amounts at the top and bottom is within 10 mm / 0.39". Only one-side cutting is not possible. |
Cut range |
|
Paper size | Multiple Cutting: Widthwise 140 mm to 330.2 mm, lengthwise 266 mm to 487.7 mm / Widthwise 5.51" to 13", lengthwise 10.47" to 19.20" * Finishing size: Standard or custom size within widthwise 120 mm to 330.2 mm, lengthwise 133 mm to 243.8 mm / widthwise 4.72" to 13", lengthwise 5.24" to 9.60" * It is also possible to have no slit or no leading edge/trailing edge cut. 2-division mode: Widthwise 140.0 mm to 330.2 mm, lengthwise 266.0 mm to 487.7 mm / Widthwise 5.51" to 13", lengthwise 10.47" to 19.20" |
Paper weight | 64 g/m2 to 400 g/m2 / 17 lb Bond to 106 lb Bond |
Top/bottom slit | 0 mm / 0" or 8 mm to 30 mm / 0.31" to 1.18" * The difference between the cutting amounts at the top and bottom is within 10 mm / 0.39". Only one-side cutting is not possible. |
Cut range |
|
Paper size |
Widthwise 140 mm to 330.2 mm, lengthwise 153 mm to 1,300 mm / Widthwise 5.51" to 13", lengthwise 6.02" to 51.18"
Widthwise 210 mm to 330.2 mm, lengthwise 153 mm to 1,300 mm / Widthwise 8.27" to 13", lengthwise 6.02" to 51.18" * Banner Unit MK-764 is required for paper of lengthwise 487.8 mm / 19.20" or larger. |
Paper weight |
80 g/m2 to 400 g/m2 / 21 lb Bond to 106 lb Bond * Paper of lengthwise 487.8 mm / 19.20" or more is limited to 128 g/m2 to 300 g/m2 / 33 lb Bond to 81 lb Bond.
The specifications varies depending on the production period of Trimmer Unit TU-510 and Trimmer Unit TU-504 and a combination of them. For details, refer to Available Weight by the Number of Rows for Gutter Slit. |
Top/bottom slit | 0 mm / 0" or 8 mm to 30 mm / 0.31" to 1.18" |
Cut range | Crease + Four Edge Trim
|
Crease + Four Edge Trim + Gutter Slit
* Up to 3 divisions in the transport direction. | |
Gutter Slit |
*: 3 rows only. |
Crease processing method | By 1 sheet |
Number of creases | Max. 5 creases However, the following restrictions apply depending on the crease combination function.
|
Minimum crease interval | 1.0 mm / 0.04" |
Crease processable range |
|
Setting units | 0.1 mm / 0.004" |
Paper size | Widthwise 210 mm to 330.2 mm, lengthwise 153 mm to 1,300 mm / Widthwise 8.27" to 13", lengthwise 6.02" to 51.18" |
Paper weight | The specifications varies depending on the production period of Trimmer Unit TU-510 and Trimmer Unit TU-504 and a combination of them. For details, refer to Available Weight by the Number of Rows for Gutter Slit. |
Top/bottom slit | 0 mm / 0" or 8 mm to 30 mm / 0.31" to 1.18" * The difference between the cutting amounts at the top and bottom is within 10 mm / 0.39". Only one-side cutting is not possible. |
Cut range |
* Up to 3 divisions in the transport direction. |
Gutter Slit |
*: 3 rows only. |
Setting units | 0.1 mm / 0.004" |
Paper size | Widthwise 140 mm to 330.2 mm, lengthwise 153 mm to 487.7 mm / Widthwise 5.51" to 13", lengthwise 6.02" to 19.20" |
Paper weight |
|
Top/bottom slit | 0 mm / 0" or 8 mm to 30 mm / 0.31" to 1.18" * 64 g/m2 / 17 lb Bond or less: 10 mm to 30 mm/ 0.39" to 1.18" |
Cut range |
|
Perforation Cut (paper crosswise direction) processable range |
|
Perforation position interval (paper crosswise direction) |
|
Perforation (paper crosswise direction) length |
|
Perforation Cut (paper feed direction) processable range |
|
Perforation position interval (paper feed direction) | 100 mm / 3.94" or more |
Perforation (paper feed direction) length |
|
Number of perforations | Paper feed direction: Max. 2 Paper crosswise direction: Max. 10 |
Setting units | 0.1 mm / 0.004" |
Paper size | Widthwise 140 mm to 330.2 mm, lengthwise 143 mm to 487.7 mm / Widthwise 5.51" to 13", lengthwise 5.63" to 19.20" |
Paper weight (2 rows) | 128 g/m2* to 400 g/m2 / 34 lb Bond* to 106 lb Bond *: Coated paper: 136 g/m2 / 42 lb Bond |
Top/bottom slit | 0 mm / 0" or 8 mm to 30 mm / 0.31" to 1.18" * 64 g/m2 / 17 lb Bond or less: 10 mm to 30 mm/ 0.39" to 1.18" |
Cut range |
|
Perforation cutting available range |
|
Perforation position interval | 100 mm / 3.94" or more |
Perforation length | Total paper length only |
Number of perforations | Max. 2 |
Paper size / Paper weight | |
Top/bottom slit | |
Cut range |
|
Perforation Cut (paper crosswise direction) processable range |
* After Multiple Cutting. |
Perforation position interval (paper crosswise direction) |
|
Perforation (paper crosswise direction) length |
|
Perforation Cut (paper feed direction) processable range |
|
Perforation position interval (paper feed direction) | 100 mm / 3.94" or more |
Perforation (paper feed direction) length |
|
Number of perforations | Paper feed direction: Max. 2 Paper crosswise direction: Max. 10 (Up to 5 perforations per sheet that is cut into two sheets) |
* For perforation processing, the settings for the first half of Multiple Cutting are similarly reflected in the second half.
Paper size | Custom: Widthwise 140 mm to 330.2 mm, lengthwise 487.8 mm to 1,300 mm / Widthwise 5.51" to 13", lengthwise 19.20" to 51.18" |
Paper weight | 128 g/m2 to 300 g/m2 / 34 lb Bond to 81 lb Bond |
Paper size | Custom: Widthwise 140 mm to 330.2 mm, lengthwise 153 mm to 900 mm / Widthwise 5.51" to 13", lengthwise 6.02" to 35.43" * Banner Unit MK-764 is required for invert conveyance of lengthwise 487.8 mm to 900 mm / lengthwise 19.20" to 35.43". |
Paper weight | 50 g/m2 to 400 g/m2 / 13 lb Bond to 106 lb Bond * Paper of lengthwise 487.8 mm to 900 mm / lengthwise 19.20" to 35.43" is limited to 128 g/m2 to 300 g/m2 / 33 lb Bond to 81 lb Bond. |
Paper size | Based on Through-path. |
Paper weight | Based on Through-path. |
Tray capacity (Secondary (sub) tray) | 100 sheets (80 g/m2 / 21 lb Bond, stack height 20 mm / 0.79") *Stack of 49 g/m2 / 13 lb Bond or less is not guaranteed. 1 sheet for paper of lengthwise 762.1 mm / 30" or larger. |
Paper size |
|
Paper weight | The specifications varies depending on the production period of Trimmer Unit TU-510 and Trimmer Unit TU-504 and a combination of them. For details, refer to Available Weight by the Number of Rows for Gutter Slit. |
Finishing standard size | 92 mm e 55 mm / 3.62" e 2.17", 85 mm e 55 mm / 3.35" e 2.17" or 89 mm e 51 mm / 3.5" e 2.01" |
Number of finishing sheets per sheet | 21 sheets (when trimmed in 3 columns e 7 rows) |
Top/bottom slit | 0 mm / 0" or 8 mm to 30 mm / 0.31" to 1.18" |
Leading edge cut |
|
Trailing edge cut |
|
Middle Cut |
|
Gutter Slit |
|
Tray capacity (Card tray of Job Separator JS-507) | 504 sheets (168 sheets e 3 columns, 177 g/m2 to 256 g/m2 / 48 lb Bond to 68 lb Bond) 420 Sheets (140 sheets e 3 columns, 257 g/m2 to 300 g/m2 / 69 lb Bond to 81 lb Bond) |
The available weight for each number of slit rows varies depending on the production period of Trimmer Unit TU-510 and Trimmer Unit TU-504 and a combination of them.
Trimmer Unit TU-510 Version | Trimmer Unit TU-504 Version | Weight | Imposition | |
---|---|---|---|---|
Uncoated paper | Coated paper | |||
WY1 | WY1 | 128 g/m2 to 300 g/m2 / 34 lb Bond to 81 lb Bond | 136 g/m2 to 300 g/m2 / 37 lb Bond to 81 lb Bond | 2 columns / 3 columns |
WY2 | WY1 | 128 g/m2 to 300 g/m2 / 34 lb Bond to 81 lb Bond | 136 g/m2 to 400 g/m2 / 37 lb Bond to 106 lb Bond | 2 columns |
128 g/m2 to 300 g/m2 / 34 lb Bond to 81 lb Bond | 136 g/m2 to 300 g/m2 / 37 lb Bond to 81 lb Bond | 3 columns | ||
WY3 | WY1 | 128 g/m2 to 400 g/m2 / 34 lb Bond to 106 lb Bond | 136 g/m2 to 400 g/m2 / 37 lb Bond to 106 lb Bond | 2 columns |
128 g/m2 to 300 g/m2 / 34 lb Bond to 81 lb Bond | 136 g/m2 to 300 g/m2 / 37 lb Bond to 81 lb Bond | 3 columns | ||
WY2 | 128 g/m2 to 400 g/m2 / 34 lb Bond to 106 lb Bond | 136 g/m2 to 400 g/m2 / 37 lb Bond to 106 lb Bond | 2 columns / 3 columns |