No. | Name | Description |
---|---|---|
1 | Main power switch | The customer engineer switches OFF/ON. Do not turn off under normal circumstances. |
2 | Toner supply door | Open when replacing Toner bottle. |
3 | Toner bottle cover (Y, M, C, K) | When replacing Toner bottle, unlock before opening. Toner bottle provides four colors: Yellow (Y), Magenta (M), Cyan (C), and Black (K). |
4 | Fusing Conveyance Unit | Pull out in the case of a paper jam. For information about each lever or knob of the Fusing Conveyance Unit, check the screen that is displayed when a paper jam occurs. |
5 | Lever [M1] | When there is a paper jam, drop to the left and pull out Fusing Conveyance Unit, then remove paper. |
6 | Drum unit | This part is formed by the copy image. |
7 | Fusing unit | This part attaches the formed image to the paper. |
8 | Rear guide plate | Align this guide with the rear edge side of the loaded paper. |
9 | Side guides | Align this guide with both sides of the loaded paper. |
10 | Feed roller | Paper is fed into the print device 1 sheet at a time. |
11 | Side guide lock knobs (2 locations) | When moving Side guides, rotate it counter-clockwise to loosen. |
12 | Side guide lock release lever | When moving Side guides, press the lever to unlock. |
13 | Waste toner box | Waste toner will be collected. |