1

Tray left side door knob

Used when opening Tray left side door.

2

Tray left side door

Open when opening Right side door to handle paper jams, and when clearing paper feeder unit tray paper jams.

3

Upper tray (Tray 1) (the 2nd from Tray 4 and 3rd from Tray 7)

Stores 1,390 sheets (80 g/m² / 21 lb Bond).

4

Middle tray (Tray 2) (the 2nd from Tray 5 and 3rd from Tray 8)

Stores 1,390 sheets (80 g/m² / 21 lb Bond).

5

Lower tray (Tray 6) (the 2nd from Tray 6 and 3rd from Tray 9)

Stores 1,850 sheets (80 g/m² / 21 lb Bond).

6

Air nozzle confirmation window

When adjusting the air level in the Middle tray or Lower tray, you can check the paper feedability through this window. You cannot check it from the Upper tray.

7

Tray handle

Hold and pull the handle when pulling out the tray.

8

Lever [PF1]

When clearing a paper jam, hold the lever, open the guide, and remove the paper.

9

Lever [PF2]

When clearing a paper jam, hold the lever, open the guide, and remove the paper.

10

Lever [PF3]

When clearing a paper jam, hold the lever, open the guide, and remove the paper.

11

Lever [PF4]

When clearing a paper jam, hold the lever, open the guide, and remove the paper.

12

Small size guides (2 locations)

Open both sides toward the inside when loading paper with a width of less than 139.7 mm / 5.5".

13

Side air nozzle

Blows air for the paper to float on in order to prevent multiple sheets of paper being fed in at the same time.

14

Paper holding plate fixing lever (2 locations)

Slide from the fixed position to the right depending on the target paper conditions.

15

Side guide lock knobs (2 locations)

Turn when moving or fixing Side guides in place.

16

Side guides (2 locations)

Align this guide with both sides of the loaded paper.

17

Rear guide plate

Align this guide with the rear edge side of the loaded paper.

18

Rear edge guide lock release lever

When moving Rear guide plate, press the lever on the left side to unlock.

19

Paper size indicator

Check the position of Side guides using the scale.

20

Edge air nozzle

Blows air to separate the paper.

21

Upper limit sensor position adjustment lever

When the lever is lifted, feed performance may drop, so do not move (slide) from the state when fixed at bottom side.

22

Bottom plate fixing knob

Turn clockwise while sliding forward, and adjust the bottom tray in the highest position.

23

Side guide lock release lever

When moving Side guides, press the lever on the back side to unlock.

24

Side auxiliary guides (2 locations)

When loading tab paper, attach to Side guides.

Name

Paper Feeder Unit PF-712

Type

3-level feed tray (maximum 3 allowed continuously)

Paper size

Standard: SRA3 w, A3 w, B4 w, SRA4 w/v, A4 w/v, B5 w/v, A5 w/v, B6 w^*1, A6 w^*1, Postcard w^*1*2, 13 e 19 w, 12 e 18 w, 11 e 17 w, 9 e 11 v, 8.5 e 14 w, 8.5 e 11 w/v, 5.5 e 8.5 w/v, 8.5 e 13 w, 8.25 e 13 w, 8.12 e 13.25 w, 8 e 13 w, 8K w, 16K w/v

Custom: Widthwise 100 mm^*3 to 330.2 mm, lengthwise 139.7 mm to 487.7 mm^*4 / Widthwise 3.94"^*3 to 13", lengthwise 5.5" to 19.2"^*4

Tab paper^*5: A4T v, 8.5 e 11T v

Envelope: Widthwise 100 mm to 245 mm, lengthwise 148 mm to 375 mm / Widthwise 3.94" to 9.65", lengthwise 5.83" to 14.76"

*1: Size that is less than 139.7 mm / 5.5" widthwise can only be loaded in the 1st tray.

*2: Only in Japan.

*3: This size is only supported when the 1st tray is mounted. When the 2nd and 3rd consecutive trays are mounted, the minimum size is 139.7 mm / 5.5".

*4: Banner paper that is widthwise 250 mm to 330.2 mm, and lengthwise 487.8 mm to 1,300 mm / 9.84" to 13", lengthwise 19.2" to 51.18" can only be fed through when the Feed Adjuster FA-505 or Multi Bypass Tray MB-511 is mounted.

*5: When loading tab paper, attach Side auxiliary guides.

Series B paper is set to JIS or ISO standard size by default. This setting differs depending on the shipping region. For JIS/ISO switching, contact your service representative.

Detectable fixed sizes can be changed. Furthermore, use of K size can be selected on the [Utility] screen, and K size can be detected. For details, refer to [K Size].

When paper is less than 139.7 mm / 5.5" widthwise, use Small size guides.

Paper type

Plain, Fine, Color Specific, Coated-G, Coated-M, Tab paper, Textured^*, Envelope^*

*: 1st Lower tray only

Paper weight

52 g/m² to 450 g/m^2* / 14 lb Bond to 119 lb Bond^*

*: The following paper sizes are only available for 351 g/m² to 450 g/m² / 94 lb Bond to 119 lb Bond. It can only be set in the 1st Lower tray.

Standard: SRA3 w, A3 w, 13 e 19 w, 12 e 18 w, 11 e 17 w

Custom: Widthwise 279.4 mm to 330.2 mm, lengthwise 420 mm to 487.7 mm / Widthwise 11" to 13", lengthwise 16.54" to 19.2"

*: Envelope: 70 g/m² to 100 g/m² / 19 lb Bond to 27 lb Bond

Feed capacity

Upper tray/Middle tray: 1,390 sheets (80 g/m² / 21 lb Bond, stack height 153 mm / 6.02")

Lower tray: 1,850 sheets (80 g/m² / 21 lb Bond, stack height 203.5 mm / 8.01")

Dimensions

996 mm (W) e 772 mm (D) e 1,038 mm (H) / 39.21" (W) e 30.39" (D) e 40.87" (H)

Weight

Approx. 210 kg / 462.97 lb

Power

In Japan: AC 100 V, 50/60 Hz (supplied from power cord)

Metric area: AC 220 V to 240 V, 50/60 Hz (supplied from power cord)

Inch area: AC 100 V to 127 V, 50/60 Hz (supplied from power cord)

DC 24 V, 12 V, AC 200 V to 240 V, 50/60 Hz (partially supplied from the front stage)

Maximum power consumption

700 W or less (Dehumidifier Heater HT-506 option not included)