[Finisher Adjustment]

• [Staple Finisher(Main) Adj.] (Finisher FS-532)

  • [Exit Guide Paper Width Adj.]
  • [Upper Gripper Operation]
  • [Output Alignment Operation]
  • [Staple Paper Width Adj.]
  • [FD Alignment Plate Adj.]
  • [Staple Position Adjustment]
  • [Rewind Paddle Descent Adj.]
  • [Rewind Function Operation]

• [Staple Finisher(Fold) Adj.] (Finisher FS-532)

  • [Fold&Staple Paper Width Adj.]
  • [Fold&Staple Pitch Adjustment]
  • [Fold&Staple Fold Position]
  • [Fold&Staple Staple Position]
  • [Half-Fold Fold Position Adj.]
  • [Tri-Fold Position Adjustment]
  • [Double Fold Plate Adjustment]
  • [Half-Fold Strength Adj.]

• [Staple Finisher(Punch) Adj.] (Finisher FS-532)

  • [Registration Adjustment]
  • [Horizontal Position Adj.(FD)]
  • [Vertical Position Adj.(CD)]

• [Staple Finisher(PI) Adj.] (Finisher FS-532)

  • [PI Registration Adjustment]

• [Staple Finisher(Main) Adj.] (Output Tray OT-510)

  • [Exit Guide Paper Width Adj.]
  • [Upper Gripper Operation]
  • [Output Alignment Operation]

• [Multi Folder(Punch) Adj.] (Folding Unit FD-503)

  • [Paper Width Adjustment]
  • [Punch Vertical Position Adj.]

• [Multi Folder(Fold) Adj.] (Folding Unit FD-503)

  • [Half-Fold Position Adj.]
  • [Z-Fold Position Adj.]
  • [Tri-Fold-in Pos. Adj.]
  • [Tri-Fold-out Pos. Adj.]
  • [Double Parallel Pos. Adj.]
  • [Gate Position Adj.]

• [Stacker Adjustment] (Large Capacity Stacker LS-506)

  • [Paper Width Adjustment]
  • [Paper Length Adjustment]

• [Saddle Stitcher Adjustment] (Saddle Stitcher SD-506)

  • [Fold Paper Width Adj.]
  • [Half-Fold Position Adj.]
  • [Staple Paper Width Adj.]
  • [Staple Center Position]
  • [Staple Pitch Adjustment]
  • [Trimming Adjustment]
  • [Tri-Fold Position Adj.]
  • [Trimmer Receiver Adj.]

• [Saddle Stitcher Adjustment] (Saddle Stitcher SD-513)

  • [Fold Paper Width Adj.]
  • [Fold Skew Adjustment]
  • [Half-Fold Position Adj.]
  • [Tri-Fold Position Adj.]
  • [Crease Position Adjustment]
  • [Staple Paper Width Adj.]
  • [Staple Center Position]
  • [Staple Pitch Adjustment]
  • [Staple Offset Adjustment]
  • [Staple Tip Adjustment]
  • [Flattening a Fold (Strength)]
  • [Flattening a Fold (Freq.)]
  • [Parallel Trimming Adjustment]
  • [Fore-edge Trimming Adj.]
  • [2-Side Slitting Adjustment]
  • [2-Side Slit Finishing Adj.]
  • [Trimmer Receiver Adj.]

• [Perfect Binder Adjustment] (Perfect Binder PB-503)

  • [Sub Compile CD Width Adj.]
  • [Clamp CD Width Adjustment]
  • [Clamp FD Position Adj.]
  • [Glue Start Position]
  • [Glue Finish Position]
  • [Cover Lead Edge Adj.]
  • [Cover Trimming Adjustment]
  • [Cover Up/Down CD Width Adj.]
  • [Spine Corner Forming Pos.]
  • [Temperature Adjustment]

• Relay Stacker Adjustment (Relay Unit RU-510)

  • [Paper Width Adjustment]
  • [Paper Length Adjustment]