Overview of Management
- Management of this Machine
Cleaning
- Cleaning the Original Glass
- Cleaning the ADF Guide Cover
- Cleaning the Original Cover
- Cleaning the Exterior of the Machine
- Cleaning the Control Panel
- Cleaning the Duplex Part
- Cleaning Main Body Tray
- Cleaning Multi Bypass Tray MB-506 or Multi Bypass Tray MB-508
- Cleaning Paper Feeder Unit PF-602m
- Cleaning Paper Feed Unit PF-707m
- Cleaning Large Capacity Unit LU-202m, Large Capacity Unit LU-202XL, or Large Capacity Unit LU-202XLm
- Cleaning Saddle Stitcher SD-506
  - Cleaning the conveyance belt
  - Disposing Trimmings
- Cleaning Saddle Stitcher SD-513
  - Cleaning the conveyance belt
  - Disposing Trimmings
- Cleaning the Folding Unit FD-503
  - Disposing Punch Waste
- Cleaning the Finisher FS-531
  - Disposing Punch Waste
- Cleaning the Finisher FS-532
  - Disposing Punch Waste
- Cleaning the Finisher FS-612
  - Disposing Punch Waste
- Cleaning the Perfect Binder PB-503
  - Disposing Trimmings
- Cleaning the Integrated Color Care Unit IQ-501
- Cleaning the Scrap Box of Multi Punch GP-501
Inspection
- PM Call
- Checking the Remaining Amount of Consumables
- Checking the Counter
  - About the counter
  - Counter screen and items
- Checking the Status Indicator Light
Replenishment and Replacement
- Replenishing paper
- Replacing a Toner Bottle
- Replacing Waste Toner Box
- Replenishing Staple Supply
- Replenishing Glue Pellets
  - Replenishing Glue Pellets in Perfect Binder PB-503
- Replenishing Water Supply in Humidifier Tank
  - Replenishing water supply in the humidifier tank of Relay Unit RU-518
- Replacing Trim Receiver
  - Replacing trim receiver of Saddle Stitcher SD-506
- Replenishing Bind Parts to Auto Ring Binder GP-502
Auto Reset and Reset
- Restoring Arbitrary Settings Automatically (Auto Reset)
  - Overview of Auto Reset
  - Auto Reset setting
- Restoring Arbitrary Settings Manually (Reset)
Power Saving
- Overview of Power Saving
- Automatically Conserving Energy
- Manually Conserving Energy
- Limiting Machine Usage
- Canceling Energy Conservation Manually
- Using Energy-save Mode for Monochrome Printing
Maintenance Service
- Maintenance Services

Auto Shut OFF

About Auto Shut OFF
Returning from Auto Shut OFF
Changing the Auto Shut OFF setting

About Auto Shut OFF

Auto Shut OFF achieves further energy conservation by reducing power consumption.

If the machine is idle for a certain period of time while being able to output, the touch panel display and LEDs other than the Power Save LED and Power LED on the control panel turn off lowering power consumption of the machine.

The Power LED keeps blue.

Reference

When Image Controller IC-605 is installed and shut off mode is activated, the print job can be configured by UTILITY. For details, refer to Power Save Function Setting or Power Save Function Setting.

Tips

If the machine is in the Shut Off mode for an extended period of time, it may take time to warm up when restarting.

Returning from Auto Shut OFF

Press Power Save on the control panel. The machine can now print.

Changing the Auto Shut OFF setting

From the UTILITY screen, Auto Shut OFF can be set to OFF and the set period of time can be changed. For details, refer to Power Save Function Setting.

Menu