Overview of Management
- Management of this Machine
Cleaning
- Cleaning the Original Glass
- Cleaning the ADF Guide Cover
- Cleaning the Original Cover
- Cleaning the Exterior of the Machine
- Cleaning the Control Panel
- Cleaning the Duplex Part
- Cleaning Main Body Tray
- Cleaning Multi Bypass Tray MB-506 or Multi Bypass Tray MB-508
- Cleaning Paper Feeder Unit PF-602m
- Cleaning Paper Feed Unit PF-707m
- Cleaning Large Capacity Unit LU-202m, Large Capacity Unit LU-202XL, or Large Capacity Unit LU-202XLm
- Cleaning Saddle Stitcher SD-506
  - Cleaning the conveyance belt
  - Disposing Trimmings
- Cleaning Saddle Stitcher SD-513
  - Cleaning the conveyance belt
  - Disposing Trimmings
- Cleaning the Folding Unit FD-503
  - Disposing Punch Waste
- Cleaning the Finisher FS-531
  - Disposing Punch Waste
- Cleaning the Finisher FS-532
  - Disposing Punch Waste
- Cleaning the Finisher FS-612
  - Disposing Punch Waste
- Cleaning the Perfect Binder PB-503
  - Disposing Trimmings
- Cleaning the Integrated Color Care Unit IQ-501
- Cleaning the Scrap Box of Multi Punch GP-501
Inspection
- PM Call
- Checking the Remaining Amount of Consumables
- Checking the Counter
  - About the counter
  - Counter screen and items
- Checking the Status Indicator Light
Replenishment and Replacement
- Replenishing paper
- Replacing a Toner Bottle
- Replacing Waste Toner Box
- Replenishing Staple Supply
- Replenishing Glue Pellets
  - Replenishing Glue Pellets in Perfect Binder PB-503
- Replenishing Water Supply in Humidifier Tank
  - Replenishing water supply in the humidifier tank of Relay Unit RU-518
- Replacing Trim Receiver
  - Replacing trim receiver of Saddle Stitcher SD-506
- Replenishing Bind Parts to Auto Ring Binder GP-502
Auto Reset and Reset
- Restoring Arbitrary Settings Automatically (Auto Reset)
  - Overview of Auto Reset
  - Auto Reset setting
- Restoring Arbitrary Settings Manually (Reset)
Power Saving
- Overview of Power Saving
- Automatically Conserving Energy
- Manually Conserving Energy
- Limiting Machine Usage
- Canceling Energy Conservation Manually
- Using Energy-save Mode for Monochrome Printing
Maintenance Service
- Maintenance Services

Cleaning Multi Bypass Tray MB-506 or Multi Bypass Tray MB-508

If the pick-up roller of Multi Bypass Tray MB-506 or Multi Bypass Tray MB-508 is dirty, wipe off stains using a soft cloth dampened with alcohol (cleaner).

When the pick-up roller rotates after one sheet was fed, perform cleaning again.

Menu

Machine Management

Cleaning Multi Bypass Tray MB-506 or Multi Bypass Tray MB-508