[CUT SETTING]
Overview
Arbitrarily set the finishing size for cutting, the cut positions at the leading edge and rear edge, and the cut width. The numeric values at the trailing edge and front edge are calculated automatically.
When attaching perforation, also set perforation positions.
a: [Height]
b: [Width]
c: [Leading Edge]
d: [Rear Edge]
e: [Cut Width] ([Crosswise])
f: FD perforation position
Tips
- Enter the numeric value, referring to [Permitted range]. For details about how to change [Permitted range], contact your service representative.
Setting Items
Setting item | Description |
|---|---|
[Height] | Sets the height of the finishing size. Set the value to 85 mm / 3.35" or more. Unit: 0.1 mm / 0.004" |
[Width] | Sets the width of the finishing size. Set the value to 133 mm / 5.24" or more. Unit: 0.1 mm / 0.004" |
[Rear Edge] | Sets the cut position at the rear edge using the value from the upper edge of paper. Set the value in the range of 0 mm / 0" or 8.0 mm to 30 mm / 0.31" to 1.18" (paper weight 64 g/m2 / 17 lb Bond or less: 10 to 30 mm / 0.39" to 1.18") so that the difference between [Rear Edge] and [Front Edge] is within 10 mm / 0.39". Only either side of [Rear Edge] and [Front Edge] cannot be set to 0 mm / 0". Unit: 0.1 mm / 0.004" |
[Front Edge] | The front edge is automatically calculated from the paper size (lengthwise), finishing size ([Height]), and [Rear Edge]. [Front Edge] = Paper size (lengthwise) - Finishing size ([Height]) - [Rear Edge] |
[Leading Edge] | Sets the cut position at the leading edge using the value from the lead edge of paper. WY1: Set the value in the range of 0 mm / 0" or 10 mm to 100 mm / 0.39" to 3.94" so that the slitting amount of [Trailing Edge] is in the range of 0 mm / 0" or 10 mm to 13 mm / 0.39" to 0.51". WY2 or later: Set the value in the range of 0 mm / 0" or 8.0 mm to 100 mm / 0.31" to 3.94" so that the slitting amount of [Trailing Edge] is in the range of 0 mm / 0" or 8.0 mm to 16 mm / 0.31" to 0.63". Unit: 0.1 mm / 0.004" |
[Cut Width] ([Crosswise]) | Set the gutter slit cutting width of the crosswise direction. Set the value in the range of 0 mm / 0" or 5.0 mm to 100 mm / 0.20" to 3.94". Unit: 0.1 mm / 0.004" |
[Trailing Edge] | The trailing edge is automatically calculated from the paper size (widthwise), finishing size ([Width]), [Leading Edge], and [Cut Width] ([Crosswise]). [Trailing Edge] = Paper size (widthwise) - Finishing size ([Width]) - [Leading Edge] - [Cut Width] ([Crosswise]) |
[FD Perforation (Rear Edge)] / [FD Perforation (Front Edge)] | Up to 2 perforation positions in the paper feed direction can be set in the rear and front sides. WY1 (Perforation Unit PE-101): Set so that the perforation position is 30 mm / 1.18" or more from [Rear Edge] or [Front Edge], and that the distance between the perforation positions in the rear and front sides is 100 mm / 3.94" or more. WY2 (Perforation Unit PE-101): Set so that the perforation position is 10 mm / 0.39" or more from [Rear Edge] or [Front Edge], and that the distance between the perforation positions in the rear and front sides is 100 mm / 3.94" or more. Unit: 0.1 mm / 0.004" |
[Disabled] | Clear this check box to set a perforation position or [Cut Width] ([Crosswise]). |
[Complete] | Creates a trimmer profile with the specified value. |
[Cancel] | Cancels the setting, and returns to the previous screen. |
You can download the trimming image with the dimensions displayed on the profile creation screen as a PDF file. This is displayed when accessed from Web Connection or Web Utilities. |
in the upper-right of a page, it turns into 
and is registered as a bookmark.