Web Connection
Q. What Should I Do to Log In to Web Connection?
A. Enter the IP address of the machine or Image Controller in the URL field of the browser, and press [Enter].
For details about how to access Web Connection, refer to the following:
Tips
For details about how to confirm the IP address, refer to the following.
- IP address of this machine: [TCP/IP Settings]
- IP address of Image Controller: [TCP/IP Setting]
Q. When Will I Lose Access to Web Connection?
A. If the following setting is configured, Web Connection is not available. To use it, contact this system's administrator.
For machine
Enhanced security mode is enabled.
[Web Connection Setting] is set to [OFF] in [Network Setting].
[Web Connection Setting] is set to [Disable] in [Quick Security Setting].
The browser installed in the Touch panel is used.
For Image Controller
[Web Connection Setting] is set to [Disable] in [Administrator Setting] - [Controller] - [Simple Security Setting].
Tips
Even if the IP filtering is set, you may not be able to access Web Connection.
- If the IP filtering is set to Off, you may be able to access Web Connection. However, when changing settings, check for security issues in advance.
- For details about [Quick IP Filtering] settings for the machine, refer to [Quick IP Filtering].
- For details about [Simple IP Filtering] settings for the Image Controller, refer to [Simple IP Filtering].
Q. What Is the Password of the Web Connection Administrator Mode?
A. For details about the default administrator password, refer to [About the Administrator Password].
If you cannot log in using the default password, contact this system's administrator.
in the upper-right of a page, it turns into 
and is registered as a bookmark.