Network
Q. Where Can I Check the IP Address of This Machine?
A. You can check the IP address in [Administrator Setting] of Control panel. For details, refer to [TCP/IP Settings].
Q. Where Can I Check the IP Address of the Image Controller?
A. You can check the IP address in [TCP/IP Setting] of [Controller]. For details, refer to [TCP/IP Setting].
Q. Can I Set the Network of This System Using Web Connection?
A. Yes, you can. For details, refer to [Network].
Q. What Should I Do to Connect This System to Macintosh Using Bonjour?
A. Check whether TCP/IP is set to this system.
The Bonjour protocol runs on TCP/IP, so you need to pre-set TCP/IP on this system. For details, refer to [TCP/IP Settings].
Q. I Cannot Access Web Connection.
A. If the following setting is configured, Web Connection is not available. To use it, contact this system's administrator.
For machine
Enhanced security mode is enabled.
[Web Connection Setting] is set to [OFF] in [Network Setting].
[Web Connection Setting] is set to [Disable] in [Quick Security Setting].
The browser installed in the Touch panel is used.
For Image Controller
[Web Connection Setting] is set to [Disable] in [Administrator Setting] - [Controller] - [Simple Security Setting].
Tips
Even if the IP filtering is set, you may not be able to access Web Connection.
- If the IP filtering is set to Off, you may be able to access Web Connection. However, when changing settings, check for security issues in advance.
- For details about [Quick IP Filtering] settings for the machine, refer to [Quick IP Filtering].
- For details about [Simple IP Filtering] settings for the Image Controller, refer to [Simple IP Filtering].
in the upper-right of a page, it turns into 
and is registered as a bookmark.