Configuring the Operating Environment for Network Printing

[Port 1] to [Port 6]

If necessary, change the RAW port number. When not using a port, select [OFF].

The following shows the default settings.

• [Port 1]: 9100

• [Port 2]: 9112

• [Port 3]: 9113

• [Port 4]: 9114

• [Port 5]: 9115

• [Port 6]: 9116

[ON]/[OFF]

Select whether to use this machine as an HTTP server.

[ON] is specified by default.

[Web Settings]

Select whether to use Web Connection.

[ON] is specified by default.

[IPP Settings]

Select whether to use IPP.

[ON] is specified by default.

[Accept IPP Jobs]

Select whether to use IPP printing.

[ON] is specified by default.

[Support Information]

Select whether to allow the following IPP operations.

• [Print Job]: Allows a print job.

• [Valid Job]: Allows you to check a valid job.

• [Cancel Job]: Allows you to cancel a job.

• [Open Job Attributes]: Allows you to obtain job attributes.

• [Open Job]: Allows you to obtain a list of job attributes.

• [Open Printer Attributes]: Allows you to obtain printer attributes.

[ON] (Allow) is specified by default.

[Printer Information]

If necessary, enter the printer information of this machine.

• [Printer Name]: Enter the printer name of this machine (using up to 127 characters).

• [Printer Location]: Enter the location where to install this machine (using up to 127 characters).

• [Printer Information]: Enter printer information of this machine (using up to 127 characters).

• [Print URI]: Displays the URI of the printers that can print data using the IPP.

[IPP Authentication Settings]

Select whether to use the IPP authentication.

[ON] is specified by default.

[General Settings]

Select the IPP authentication method.

When [Synchronize] is selected in [User Authentication Synchronization], [requesting-user-name] is not available.

[requesting-user-name] is specified by default.

[IPP-SSL Settings]

Specify whether to use the SSL for communication or not.

• [Non-SSL Only]: Only non-SSL communication is allowed.

• [SSL Only]: Only SSL communication is allowed.

• [SSL/Non-SSL]: Both SSL communication and non-SSL communication are allowed.

[Non-SSL Only] is specified by default.

[User Name]

Enter a user name (using up to 20 characters).

This entry is required if you have selected [basic], [digest-MD5], or [digest-SHA2] for [General Settings].

[Password]

Enter the password of the user specified in [User Name].

This entry is required if you have selected [basic], [digest-MD5], or [digest-SHA2] for [General Settings].

[realm]

If [digest-MD5] or [digest-SHA2] is selected for [General Settings], enter the domain (realm) (using up to 127 characters).

[User Authentication Synchronization]

Select whether to synchronize user authentication and account track with IPP authentication when both user authentication and account track are implemented.

If [Synchronize] is selected, IPP authentication is performed using the user authentication function of this machine. When [requesting-user-name] is selected in [General Settings], this function is not available.

[Do Not Synchronize] is specified by default.

[User Authentication Information for IPP Print]

Select login information used to perform user authentication when managing IPP print jobs on this machine.

This option is available if [Synchronize] is selected in [User Authentication Synchronization].

• [Prioritize IPP Authentication Information]: Uses the user name and password for IPP authentication.

• [Prioritize PJL Information]: Prioritizes the user name and password for PJL, and uses the user name and password for IPP authentication only when there is no PJL description.

[Prioritize IPP Authentication Information] is specified by default.

[ON]/[OFF]

Select whether to use Bonjour.

[OFF] is specified by default.

[Bonjour Name]

Enter a Bonjour name that is to be displayed as the name of connected device (using up to 63 characters).