[Multi Monitor]
Overview
This function displays the multiple remote monitors side by side to monitor the statuses of multiple machines collectively.
NOTICE
The following settings are required to use this function.
- Establish network communications between the machine and computer in [TCP/IP Setting] of this system.
- Set [WebUtilities Setting] of this system to [ON].
- Set [Enhanced Security Mode] of this system to [OFF].
- Set [Remote Panel Setting] of this system to [Enable].
- Enable JavaScript in the browser setting.
Tips
- Up to 10 remote monitors can be displayed.
Reference
- For details about [TCP/IP Setting], refer to [TCP/IP Settings].
- For details about [WebUtilities Setting], refer to [WebUtilities Setting].
- For details about [Enhanced Security Mode], refer to [Enhanced Security Mode].
- For details about [Remote Panel Setting], refer to [Remote Panel Setting].
Screen and Description
Clicking 1 remote monitor allows you to operate its machine as the remote panel on the same browser.
Item | Description |
|---|---|
SCAN | Displays the scan status of this system. |
Displays the print status of this system. |
The background color of the remote monitor changes depending on the status of this system. The correspondence between the status and background color is as follows.
Background color | Status |
|---|---|
Green | IDLING, WARM-UP, or ADJUSTMENT |
Blue | OPERATING |
Yellow | JAM |
Red | SERVICE CALL |
Reference
- For details about the remote panel, refer to What Is [Remote Panel]?.
- For details about the multi-monitor setting, refer to [Remote Panel Setting/Job History Setting].
in the upper-right of a page, it turns into 
and is registered as a bookmark.