[AccurioPro Cloud Eye Setting]
Overview
Configure the setting required to connect the Image Controller to Color Centro via the network.
Connecting to Color Centro allows you to perform color management of the Image Controller on cloud.
NOTICE
The following setting is required to display this screen.
- Color Centro is used. For details, contact your service representative.
Setting Items
Setting item | Description | |
|---|---|---|
[User ID] | Enter the destination's user ID. Up to 254 single-byte characters can be entered. | |
[Password] | Enter the destination's password. Up to 254 single-byte characters can be entered. To change the password, select the [Password is changed.] check box. | |
[URL] | Enter the destination's URL. Up to 255 single-byte characters can be entered. | |
[Proxy Settings] | ||
[Proxy Server Settings] | [ON] | Uses a proxy server. |
[OFF] | Does not use a proxy server. | |
[Proxy Server Address] | [IPv4] | Sets the proxy server address. Select the address type, and enter the address. |
[IPv6] | ||
[Host Name] | ||
[Proxy Server Port Number] | Enter the port number of the proxy server. Range: 1 to 65535 | |
[User Name] | Sets the user name used to log in to the proxy server. | |
[Password] | Sets the password used to log in to the proxy server. To change the password, select the [Password is changed.] check box. | |
in the upper-right of a page, it turns into 
and is registered as a bookmark.