Configure the setting to perform printing or scanning with the Web service using the discovery proxy service.
In general use, to print data from the Image Controller using the Web service, a computer must be connected to a location that enables multicast communications from the Image Controller. In this case, install the discovery proxy server in a location that enables multicast communications from the Image Controller, you can print data from the Image Controller.
Setting item | Description | |
---|---|---|
[Enable Proxy] | [ON] | Uses a proxy server. |
[OFF] | Does not use a proxy server. | |
[Proxy1] to [Proxy3] | Select each check box to set a proxy server in the following setting items. The setting method is the same for each proxy server. | |
[Proxy Server Address] | Sets the proxy server address. To enter the host name, select the [Please check to enter host name.] check box. | |
[File Path] | Sets the file path of the proxy server. Up to 255 single-byte characters can be entered. | |
[Enable SSL] | [ON] | Uses SSL. |
[OFF] | Does not use SSL. | |
[Proxy Server Port Number] | Enter the port number of the proxy server. Range: 1 to 65535 |