[FS Main Tray Replace]

Lowers the position of the Main tray of the output system option. This is available when the banner output unit is attached to or detached from the Main tray.

NOTICE

The following combination of options is required to use this feature.

• Output Tray OT-512 and Banner Output Tray Unit MK-761

NOTICE

• Before attaching or detaching Banner Output Tray Unit MK-761, always display the dialog box, and lower the Main tray.

Tips

• The option configuration for attaching Banner Output Tray Unit MK-761 is limited. For details, refer to Specifications.

This section describes the procedure for mounting the output extension tray (Banner Output Tray Unit MK-761) on Output Tray OT-512.

1

Press [FS Main Tray Replace].

The dialog box is displayed, and the Main tray lowers (approximately 5 cm / 1.97").

2

Insert the bracket (A) of Banner Output Tray Unit MK-761 into the slot (a) of the Main tray.

3

Insert the bracket (B) of Banner Output Tray Unit MK-761 into the slot (b) of the Main tray while making adjustments by hand as needed.

4

Extend the Tray extension of Banner Output Tray Unit MK-761 to suit the size of the output paper.

5

Press [Close] in the dialog box.

The Main tray rises and returns to the original position.