[PB Heater]
Overview
Make preparations to use Perfect Binder PB-503.
If you know the start time of Perfect Binder PB-503 in advance, set it to [ON] about 20 minutes before use; you can work efficiently. Also, to prevent the glue from deteriorating, set it to [OFF] when not using the perfect binder.
NOTICE
- The optional Perfect Binder PB-503 is required to use this function.
Tips
The heater of the Perfect Binder PB-503 automatically warms up when
- [Perfect Bind] is selected on the [Output Setting] screen; or
- a perfect binding job has been received.
Tips
In this system, to prevent the glue from deteriorating, the heater is turned OFF when
- approximately 1 minute lapsed after a job has been completed; or
- approximately 1 minute lapsed without using Perfect Binder PB-503 after the heater warm-up mode has been completed.
Setting Items
Setting item | Description |
|---|---|
[ON] | The message changes to [PB Warming Up], and the heater is turned ON. This changes to [PB Heater] when the perfect binder is ready. |
[OFF] | The message changes to [PB Shut Off], and the heater is turned OFF. |
in the upper-right of a page, it turns into 
and is registered as a bookmark.