Fully Using Print Functions

[PDL Setting]

Select the Page Description Language (default: [Auto]). When you select [Auto], this machine automatically switches between PCL and PS.

[Image Quality Setting]

Select the optimum quality setting mode for the original (default: [Document]).

• [Document/Photo]: Applies the image quality setting suitable for originals containing multiple elements, such as text, graphs, figures, and photos.

• [Document]: Applies the image quality setting suitable for originals containing texts primarily.

• [Photo]: Applies the image quality setting focused on the image quality.

• [CAD]: Applies the image quality setting suitable for originals composed of thin lines. Images are reproduced in high resolutions.

[Edge Enhancement]

Select whether to highlight edges of an image (default: [OFF]).

Select this option to sharpen the edges of images such as text in the table and graphics to improve legibility when clearing small or faint text.

[Paper Tray]

Specify the paper tray (default: [Auto]).

[2-Sided Print]

Select whether to print an original on both sides of paper when data containing multiple pages is printed (default: [OFF]).

[Binding Position]

Select the binding position for 2-sided printing (default: [Left Bind]).

[Number of Sets]

Enter the number of copies to be printed (default: [1] copy).

[Default Paper Size]

Select the size for the printing paper (the default value varies depending on the area you are in).

[Paper Type]

Select the type for the printing paper (default: [No Selection]).

[Original Direction]

Select the orientation of the image to be printed (default: [Portrait]).

[Spool Print Jobs in HDD before RIP]

When saving the next print job on the storage if the job is received while another print job is being executed, select [ON] (default: [ON]).

[Banner Sheet Setting]

Select whether to print a banner page (front cover) that contains the sender or title of print data (default: [OFF]).

[Banner Sheet Paper Tray]

Select a paper tray to print a banner page (front cover) (default: [Auto]).

[A4/A3 <- -> LTR/LGR Auto Switch]

Select whether to use paper of a size similar to the size specified in [Default Paper Size] if the specified paper is not loaded in the paper tray (default: [OFF]).

In normal circumstances, select [OFF]. When you select [On], size conversion between A4 and Letter automatically occurs and images may be partially lost.

[Binding Direction Adjustment]

Select how the binding position is adjusted on two-sided printed sheets (default: [Finishing Priority]).

• [Finishing Priority]: After all pages are received, the binding position is adjusted and printing is started.

• [Productivity Priority]: Each time a page is received, the binding position is adjusted and printing is started.

• [Control Adjustments]: The printing position is not adjusted. The pages are printed according to the settings specified in the printer driver.

[Line Width Adjustment (600dpi)]

Select how to adjust the text or line width when printing with 600 dpi resolution (default: [Std.]).

• [Thin]: Select this option to draw letters and lines thinly. Details of letters and figures can be printed elaborately.

• [Slightly Thin]: Select this option to draw letters and lines with a thickness between [Thin] and [Std.].

• [Std.]: Select this option to draw letters and lines with a normal thickness.

• [Slightly Thick]: Select this option to draw letters and lines with a thickness between [Std.] and [Thick].

• [Thick]: Select this option to draw letters and lines thickly. Letters and figures are printed clearly.

[Line Width Adjustment (1200dpi)]

Select how to adjust the text or line width when printing with 1200 dpi resolution (default: [Std.]).

• [Thin]: Select this option to draw letters and lines thinly. Details of letters and figures can be printed elaborately.

• [Slightly Thin]: Select this option to draw letters and lines with a thickness between [Thin] and [Std.].

• [Std.]: Select this option to draw letters and lines with a normal thickness.

• [Slightly Thick]: Select this option to draw letters and lines with a thickness between [Std.] and [Thick].

• [Thick]: Select this option to draw letters and lines thickly. Letters and figures are printed clearly.

[Gray Background Text Correction]

Select whether to prevent text or lines on a gray background from appearing thicker than they actually are (default: [ON]).

Selecting [ON] makes the text and lines on a gray background look to have the same width as the text and lines on a non-gray background.

[Minimal Print]

Select whether to slightly reduce the size of the entire page when directly printing a PDF, PPML, or OOXML (docx, xlsx, or pptx) file (default: [OFF]).

This function is available when printing the entire original image, including its edges.

[OOXML Print Mode]

Select whether to give priority to either the image quality or speed when directly printing an OOXML (docx, xlsx, or pptx) file (default: [Prioritize Speed]).

[Toner Save]

Select whether to save toner consumption by reducing the printing density (default: [OFF]).

[Print/Fax Output]

Select when to start printing received print/fax data.

• [Print]: Select the timing to start printing received data (default: [Save & Print]).
  [Batch Print]: Printing is started after all pages are received.
  [Save & Print]: Printing is started as the first page is received.

• [Fax]: Select the timing to start printing received fax data (default: [Batch Print]).
  [Batch Print]: Printing is started after all pages are received.
  [Save & Print]: Printing is started as the first page is received.
  For Internet Fax, Batch Print is always selected.

[PDL Setting]

Select the Page Description Language (default: [Auto]). When you select [Auto], this machine automatically switches between PCL and PS.

[Image Quality Setting]

Select the optimum quality setting mode for the original (default: [Document]).

• [Document/Photo]: Applies the image quality setting suitable for originals containing multiple elements, such as text, graphs, figures, and photos.

• [Document]: Applies the image quality setting suitable for originals containing texts primarily.

• [Photo]: Applies the image quality setting focused on the image quality.

• [CAD]: Applies the image quality setting suitable for originals composed of thin lines. Images are reproduced in high resolutions.

[Edge Enhancement]

Select whether to highlight edges of an image (default: [OFF]).

Select this option to sharpen the edges of images such as text in the table and graphics to improve legibility when clearing small or faint text.

[Paper Tray]

Specify the paper tray (default: [Auto]).

[2-Sided Print]

Select whether to print an original on both sides of paper when data containing multiple pages is printed (default: [OFF]).

[Binding Position]

Select the binding position for 2-sided printing (default: [Left Bind]).

[Number of Sets]

Enter the number of copies to be printed (default: [1] copy).

[Default Paper Size]

Select the size for the printing paper (the default value varies depending on the area you are in).

[Paper Type]

Select the type for the printing paper (default: [No Selection]).

[Original Direction]

Select the orientation of the image to be printed (default: [Portrait]).

[Spool Print Jobs in HDD before RIP]

When saving the next print job on the storage if the job is received while another print job is being executed, select [ON] (default: [ON]).

[Banner Sheet Setting]

Select whether to print a banner page (front cover) that contains the sender or title of print data (default: [OFF]).

[Banner Sheet Paper Tray]

Select a paper tray to print a banner page (front cover) (default: [Auto]).

[A4/A3 <- -> LTR/LGR Auto Switch]

Select whether to use paper of a size similar to the size specified in [Default Paper Size] if the specified paper is not loaded in the paper tray (default: [OFF]).

In normal circumstances, select [OFF]. When you select [On], size conversion between A4 and Letter automatically occurs and images may be partially lost.

[Binding Direction Adjustment]

Select how the binding position is adjusted on two-sided printed sheets (default: [Finishing Priority]).

• [Finishing Priority]: After all pages are received, the binding position is adjusted and printing is started.

• [Productivity Priority]: Each time a page is received, the binding position is adjusted and printing is started.

• [Control Adjustments]: The printing position is not adjusted. The pages are printed according to the settings specified in the printer driver.

[Line Width Adjustment (600dpi)]

Select how to adjust the text or line width when printing with 600 dpi resolution (default: [Std.]).

• [Thin]: Select this option to draw letters and lines thinly. Details of letters and figures can be printed elaborately.

• [Slightly Thin]: Select this option to draw letters and lines with a thickness between [Thin] and [Std.].

• [Std.]: Select this option to draw letters and lines with a normal thickness.

• [Slightly Thick]: Select this option to draw letters and lines with a thickness between [Std.] and [Thick].

• [Thick]: Select this option to draw letters and lines thickly. Letters and figures are printed clearly.

[Line Width Adjustment (1200dpi)]

Select how to adjust the text or line width when printing with 1200 dpi resolution (default: [Std.]).

• [Thin]: Select this option to draw letters and lines thinly. Details of letters and figures can be printed elaborately.

• [Slightly Thin]: Select this option to draw letters and lines with a thickness between [Thin] and [Std.].

• [Std.]: Select this option to draw letters and lines with a normal thickness.

• [Slightly Thick]: Select this option to draw letters and lines with a thickness between [Std.] and [Thick].

• [Thick]: Select this option to draw letters and lines thickly. Letters and figures are printed clearly.

[Gray Background Text Correction]

Select whether to prevent text or lines on a gray background from appearing thicker than they actually are (default: [ON]).

Selecting [ON] makes the text and lines on a gray background look to have the same width as the text and lines on a non-gray background.

[Minimal Print]

Select whether to slightly reduce the size of the entire page when directly printing a PDF, PPML, or OOXML (docx, xlsx, or pptx) file (default: [OFF]).

This function is available when printing the entire original image, including its edges.

[OOXML Print Mode]

Select whether to give priority to either the image quality or speed when directly printing an OOXML (docx, xlsx, or pptx) file (default: [Prioritize Speed]).

[Toner Save]

Select whether to save toner consumption by reducing the printing density (default: [OFF]).

[Print/Fax Output]

Select when to start printing received print/fax data.

• [Print]: Select the timing to start printing received data (default: [Save & Print]).
  [Batch Print]: Printing is started after all pages are received.
  [Save & Print]: Printing is started as the first page is received.

• [Fax]: Select the timing to start printing received fax data (default: [Batch Print]).
  [Batch Print]: Printing is started after all pages are received.
  [Save & Print]: Printing is started as the first page is received.
  For Internet Fax, Batch Print is always selected.

[PDL Setting]

Select the Page Description Language (default: [Auto]). When you select [Auto], this machine automatically switches between PCL and PS.

[Image Quality Setting]

Select the optimum quality setting mode for the original (default: [Document]).

• [Document/Photo]: Applies the image quality setting suitable for originals containing multiple elements, such as text, graphs, figures, and photos.

• [Document]: Applies the image quality setting suitable for originals containing texts primarily.

• [Photo]: Applies the image quality setting focused on the image quality.

• [CAD]: Applies the image quality setting suitable for originals composed of thin lines. Images are reproduced in high resolutions.

[Edge Enhancement]

Select whether to highlight edges of an image (default: [OFF]).

Select this option to sharpen the edges of images such as text in the table and graphics to improve legibility when clearing small or faint text.

[Paper Tray]

Specify the paper tray (default: [Auto]).

[2-Sided Print]

Select whether to print an original on both sides of paper when data containing multiple pages is printed (default: [OFF]).

[Binding Position]

Select the binding position for 2-sided printing (default: [Left Bind]).

[Number of Sets]

Enter the number of copies to be printed (default: [1] copy).

[Default Paper Size]

Select the size for the printing paper (the default value varies depending on the area you are in).

[Paper Type]

Select the type for the printing paper (default: [No Selection]).

[Original Direction]

Select the orientation of the image to be printed (default: [Portrait]).

[Spool Print Jobs in HDD before RIP]

When saving the next print job on the storage if the job is received while another print job is being executed, select [ON] (default: [ON]).

[Banner Sheet Setting]

Select whether to print a banner page (front cover) that contains the sender or title of print data (default: [OFF]).

[Banner Sheet Paper Tray]

Select a paper tray to print a banner page (front cover) (default: [Auto]).

[A4/A3 <- -> LTR/LGR Auto Switch]

Select whether to use paper of a size similar to the size specified in [Default Paper Size] if the specified paper is not loaded in the paper tray (default: [OFF]).

In normal circumstances, select [OFF]. When you select [On], size conversion between A4 and Letter automatically occurs and images may be partially lost.

[Binding Direction Adjustment]

Select how the binding position is adjusted on two-sided printed sheets (default: [Finishing Priority]).

• [Finishing Priority]: After all pages are received, the binding position is adjusted and printing is started.

• [Productivity Priority]: Each time a page is received, the binding position is adjusted and printing is started.

• [Control Adjustments]: The printing position is not adjusted. The pages are printed according to the settings specified in the printer driver.

[Line Width Adjustment (600dpi)]

Select how to adjust the text or line width when printing with 600 dpi resolution (default: [Std.]).

• [Thin]: Select this option to draw letters and lines thinly. Details of letters and figures can be printed elaborately.

• [Slightly Thin]: Select this option to draw letters and lines with a thickness between [Thin] and [Std.].

• [Std.]: Select this option to draw letters and lines with a normal thickness.

• [Slightly Thick]: Select this option to draw letters and lines with a thickness between [Std.] and [Thick].

• [Thick]: Select this option to draw letters and lines thickly. Letters and figures are printed clearly.

[Line Width Adjustment (1200dpi)]

Select how to adjust the text or line width when printing with 1200 dpi resolution (default: [Std.]).

• [Thin]: Select this option to draw letters and lines thinly. Details of letters and figures can be printed elaborately.

• [Slightly Thin]: Select this option to draw letters and lines with a thickness between [Thin] and [Std.].

• [Std.]: Select this option to draw letters and lines with a normal thickness.

• [Slightly Thick]: Select this option to draw letters and lines with a thickness between [Std.] and [Thick].

• [Thick]: Select this option to draw letters and lines thickly. Letters and figures are printed clearly.

[Gray Background Text Correction]

Select whether to prevent text or lines on a gray background from appearing thicker than they actually are (default: [ON]).

Selecting [ON] makes the text and lines on a gray background look to have the same width as the text and lines on a non-gray background.

[Minimal Print]

Select whether to slightly reduce the size of the entire page when directly printing a PDF, PPML, or OOXML (docx, xlsx, or pptx) file (default: [OFF]).

This function is available when printing the entire original image, including its edges.

[OOXML Print Mode]

Select whether to give priority to either the image quality or speed when directly printing an OOXML (docx, xlsx, or pptx) file (default: [Prioritize Speed]).

[Toner Save]

Select whether to save toner consumption by reducing the printing density (default: [OFF]).

[Print/Fax Output]

Select when to start printing received print/fax data.

• [Print]: Select the timing to start printing received data (default: [Save & Print]).
  [Batch Print]: Printing is started after all pages are received.
  [Save & Print]: Printing is started as the first page is received.

• [Fax]: Select the timing to start printing received fax data (default: [Batch Print]).
  [Batch Print]: Printing is started after all pages are received.
  [Save & Print]: Printing is started as the first page is received.
  For Internet Fax, Batch Print is always selected.

[PDL Setting]

Select the Page Description Language (default: [Auto]). When you select [Auto], this machine automatically switches between PCL and PS.

[Image Quality Setting]

Select the optimum quality setting mode for the original (default: [Document]).

• [Document/Photo]: Applies the image quality setting suitable for originals containing multiple elements, such as text, graphs, figures, and photos.

• [Document]: Applies the image quality setting suitable for originals containing texts primarily.

• [Photo]: Applies the image quality setting focused on the image quality.

• [CAD]: Applies the image quality setting suitable for originals composed of thin lines. Images are reproduced in high resolutions.

[Edge Enhancement]

Select whether to highlight edges of an image (default: [OFF]).

Select this option to sharpen the edges of images such as text in the table and graphics to improve legibility when clearing small or faint text.

[Paper Tray]

Specify the paper tray (default: [Auto]).

[2-Sided Print]

Select whether to print an original on both sides of paper when data containing multiple pages is printed (default: [OFF]).

[Binding Position]

Select the binding position for 2-sided printing (default: [Left Bind]).

[Number of Sets]

Enter the number of copies to be printed (default: [1] copy).

[Default Paper Size]

Select the size for the printing paper (the default value varies depending on the area you are in).

[Paper Type]

Select the type for the printing paper (default: [No Selection]).

[Original Direction]

Select the orientation of the image to be printed (default: [Portrait]).

[Spool Print Jobs in HDD before RIP]

When saving the next print job on the storage if the job is received while another print job is being executed, select [ON] (default: [ON]).

[Banner Sheet Setting]

Select whether to print a banner page (front cover) that contains the sender or title of print data (default: [OFF]).

[Banner Sheet Paper Tray]

Select a paper tray to print a banner page (front cover) (default: [Auto]).

[A4/A3 <- -> LTR/LGR Auto Switch]

Select whether to use paper of a size similar to the size specified in [Default Paper Size] if the specified paper is not loaded in the paper tray (default: [OFF]).

In normal circumstances, select [OFF]. When you select [On], size conversion between A4 and Letter automatically occurs and images may be partially lost.

[Binding Direction Adjustment]

Select how the binding position is adjusted on two-sided printed sheets (default: [Finishing Priority]).

• [Finishing Priority]: After all pages are received, the binding position is adjusted and printing is started.

• [Productivity Priority]: Each time a page is received, the binding position is adjusted and printing is started.

• [Control Adjustments]: The printing position is not adjusted. The pages are printed according to the settings specified in the printer driver.

[Line Width Adjustment (600dpi)]

Select how to adjust the text or line width when printing with 600 dpi resolution (default: [Std.]).

• [Thin]: Select this option to draw letters and lines thinly. Details of letters and figures can be printed elaborately.

• [Slightly Thin]: Select this option to draw letters and lines with a thickness between [Thin] and [Std.].

• [Std.]: Select this option to draw letters and lines with a normal thickness.

• [Slightly Thick]: Select this option to draw letters and lines with a thickness between [Std.] and [Thick].

• [Thick]: Select this option to draw letters and lines thickly. Letters and figures are printed clearly.

[Line Width Adjustment (1200dpi)]

Select how to adjust the text or line width when printing with 1200 dpi resolution (default: [Std.]).

• [Thin]: Select this option to draw letters and lines thinly. Details of letters and figures can be printed elaborately.

• [Slightly Thin]: Select this option to draw letters and lines with a thickness between [Thin] and [Std.].

• [Std.]: Select this option to draw letters and lines with a normal thickness.

• [Slightly Thick]: Select this option to draw letters and lines with a thickness between [Std.] and [Thick].

• [Thick]: Select this option to draw letters and lines thickly. Letters and figures are printed clearly.

[Gray Background Text Correction]

Select whether to prevent text or lines on a gray background from appearing thicker than they actually are (default: [ON]).

Selecting [ON] makes the text and lines on a gray background look to have the same width as the text and lines on a non-gray background.

[Minimal Print]

Select whether to slightly reduce the size of the entire page when directly printing a PDF, PPML, or OOXML (docx, xlsx, or pptx) file (default: [OFF]).

This function is available when printing the entire original image, including its edges.

[OOXML Print Mode]

Select whether to give priority to either the image quality or speed when directly printing an OOXML (docx, xlsx, or pptx) file (default: [Prioritize Speed]).

[Toner Save]

Select whether to save toner consumption by reducing the printing density (default: [OFF]).

[Print/Fax Output]

Select when to start printing received print/fax data.

• [Print]: Select the timing to start printing received data (default: [Save & Print]).
  [Batch Print]: Printing is started after all pages are received.
  [Save & Print]: Printing is started as the first page is received.

• [Fax]: Select the timing to start printing received fax data (default: [Batch Print]).
  [Batch Print]: Printing is started after all pages are received.
  [Save & Print]: Printing is started as the first page is received.
  For Internet Fax, Batch Print is always selected.

[PDL Setting]

Select the Page Description Language (default: [Auto]). When you select [Auto], this machine automatically switches between PCL and PS.

[Image Quality Setting]

Select the optimum quality setting mode for the original (default: [Document]).

• [Document/Photo]: Applies the image quality setting suitable for originals containing multiple elements, such as text, graphs, figures, and photos.

• [Document]: Applies the image quality setting suitable for originals containing texts primarily.

• [Photo]: Applies the image quality setting focused on the image quality.

• [CAD]: Applies the image quality setting suitable for originals composed of thin lines. Images are reproduced in high resolutions.

[Edge Enhancement]

Select whether to highlight edges of an image (default: [OFF]).

Select this option to sharpen the edges of images such as text in the table and graphics to improve legibility when clearing small or faint text.

[Paper Tray]

Specify the paper tray (default: [Auto]).

[2-Sided Print]

Select whether to print an original on both sides of paper when data containing multiple pages is printed (default: [OFF]).

[Binding Position]

Select the binding position for 2-sided printing (default: [Left Bind]).

[Number of Sets]

Enter the number of copies to be printed (default: [1] copy).

[Default Paper Size]

Select the size for the printing paper (the default value varies depending on the area you are in).

[Paper Type]

Select the type for the printing paper (default: [No Selection]).

[Original Direction]

Select the orientation of the image to be printed (default: [Portrait]).

[Spool Print Jobs in HDD before RIP]

When saving the next print job on the storage if the job is received while another print job is being executed, select [ON] (default: [ON]).

[Banner Sheet Setting]

Select whether to print a banner page (front cover) that contains the sender or title of print data (default: [OFF]).

[Banner Sheet Paper Tray]

Select a paper tray to print a banner page (front cover) (default: [Auto]).

[A4/A3 <- -> LTR/LGR Auto Switch]

Select whether to use paper of a size similar to the size specified in [Default Paper Size] if the specified paper is not loaded in the paper tray (default: [OFF]).

In normal circumstances, select [OFF]. When you select [On], size conversion between A4 and Letter automatically occurs and images may be partially lost.

[Binding Direction Adjustment]

Select how the binding position is adjusted on two-sided printed sheets (default: [Finishing Priority]).

• [Finishing Priority]: After all pages are received, the binding position is adjusted and printing is started.

• [Productivity Priority]: Each time a page is received, the binding position is adjusted and printing is started.

• [Control Adjustments]: The printing position is not adjusted. The pages are printed according to the settings specified in the printer driver.

[Line Width Adjustment (600dpi)]

Select how to adjust the text or line width when printing with 600 dpi resolution (default: [Std.]).

• [Thin]: Select this option to draw letters and lines thinly. Details of letters and figures can be printed elaborately.

• [Slightly Thin]: Select this option to draw letters and lines with a thickness between [Thin] and [Std.].

• [Std.]: Select this option to draw letters and lines with a normal thickness.

• [Slightly Thick]: Select this option to draw letters and lines with a thickness between [Std.] and [Thick].

• [Thick]: Select this option to draw letters and lines thickly. Letters and figures are printed clearly.

[Line Width Adjustment (1200dpi)]

Select how to adjust the text or line width when printing with 1200 dpi resolution (default: [Std.]).

• [Thin]: Select this option to draw letters and lines thinly. Details of letters and figures can be printed elaborately.

• [Slightly Thin]: Select this option to draw letters and lines with a thickness between [Thin] and [Std.].

• [Std.]: Select this option to draw letters and lines with a normal thickness.

• [Slightly Thick]: Select this option to draw letters and lines with a thickness between [Std.] and [Thick].

• [Thick]: Select this option to draw letters and lines thickly. Letters and figures are printed clearly.

[Gray Background Text Correction]

Select whether to prevent text or lines on a gray background from appearing thicker than they actually are (default: [ON]).

Selecting [ON] makes the text and lines on a gray background look to have the same width as the text and lines on a non-gray background.

[Minimal Print]

Select whether to slightly reduce the size of the entire page when directly printing a PDF, PPML, or OOXML (docx, xlsx, or pptx) file (default: [OFF]).

This function is available when printing the entire original image, including its edges.

[OOXML Print Mode]

Select whether to give priority to either the image quality or speed when directly printing an OOXML (docx, xlsx, or pptx) file (default: [Prioritize Speed]).

[Toner Save]

Select whether to save toner consumption by reducing the printing density (default: [OFF]).

[Print/Fax Output]

Select when to start printing received print/fax data.

• [Print]: Select the timing to start printing received data (default: [Save & Print]).
  [Batch Print]: Printing is started after all pages are received.
  [Save & Print]: Printing is started as the first page is received.

• [Fax]: Select the timing to start printing received fax data (default: [Batch Print]).
  [Batch Print]: Printing is started after all pages are received.
  [Save & Print]: Printing is started as the first page is received.
  For Internet Fax, Batch Print is always selected.

[PDL Setting]

Select the Page Description Language (default: [Auto]). When you select [Auto], this machine automatically switches between PCL and PS.

[Image Quality Setting]

Select the optimum quality setting mode for the original (default: [Document]).

• [Document/Photo]: Applies the image quality setting suitable for originals containing multiple elements, such as text, graphs, figures, and photos.

• [Document]: Applies the image quality setting suitable for originals containing texts primarily.

• [Photo]: Applies the image quality setting focused on the image quality.

• [CAD]: Applies the image quality setting suitable for originals composed of thin lines. Images are reproduced in high resolutions.

[Edge Enhancement]

Select whether to highlight edges of an image (default: [OFF]).

Select this option to sharpen the edges of images such as text in the table and graphics to improve legibility when clearing small or faint text.

[Paper Tray]

Specify the paper tray (default: [Auto]).

[2-Sided Print]

Select whether to print an original on both sides of paper when data containing multiple pages is printed (default: [OFF]).

[Binding Position]

Select the binding position for 2-sided printing (default: [Left Bind]).

[Number of Sets]

Enter the number of copies to be printed (default: [1] copy).

[Default Paper Size]

Select the size for the printing paper (the default value varies depending on the area you are in).

[Paper Type]

Select the type for the printing paper (default: [No Selection]).

[Original Direction]

Select the orientation of the image to be printed (default: [Portrait]).

[Spool Print Jobs in HDD before RIP]

When saving the next print job on the storage if the job is received while another print job is being executed, select [ON] (default: [ON]).

[Banner Sheet Setting]

Select whether to print a banner page (front cover) that contains the sender or title of print data (default: [OFF]).

[Banner Sheet Paper Tray]

Select a paper tray to print a banner page (front cover) (default: [Auto]).

[A4/A3 <- -> LTR/LGR Auto Switch]

Select whether to use paper of a size similar to the size specified in [Default Paper Size] if the specified paper is not loaded in the paper tray (default: [OFF]).

In normal circumstances, select [OFF]. When you select [On], size conversion between A4 and Letter automatically occurs and images may be partially lost.

[Binding Direction Adjustment]

Select how the binding position is adjusted on two-sided printed sheets (default: [Finishing Priority]).

• [Finishing Priority]: After all pages are received, the binding position is adjusted and printing is started.

• [Productivity Priority]: Each time a page is received, the binding position is adjusted and printing is started.

• [Control Adjustments]: The printing position is not adjusted. The pages are printed according to the settings specified in the printer driver.

[Line Width Adjustment (600dpi)]

Select how to adjust the text or line width when printing with 600 dpi resolution (default: [Std.]).

• [Thin]: Select this option to draw letters and lines thinly. Details of letters and figures can be printed elaborately.

• [Slightly Thin]: Select this option to draw letters and lines with a thickness between [Thin] and [Std.].

• [Std.]: Select this option to draw letters and lines with a normal thickness.

• [Slightly Thick]: Select this option to draw letters and lines with a thickness between [Std.] and [Thick].

• [Thick]: Select this option to draw letters and lines thickly. Letters and figures are printed clearly.

[Line Width Adjustment (1200dpi)]

Select how to adjust the text or line width when printing with 1200 dpi resolution (default: [Std.]).

• [Thin]: Select this option to draw letters and lines thinly. Details of letters and figures can be printed elaborately.

• [Slightly Thin]: Select this option to draw letters and lines with a thickness between [Thin] and [Std.].

• [Std.]: Select this option to draw letters and lines with a normal thickness.

• [Slightly Thick]: Select this option to draw letters and lines with a thickness between [Std.] and [Thick].

• [Thick]: Select this option to draw letters and lines thickly. Letters and figures are printed clearly.

[Gray Background Text Correction]

Select whether to prevent text or lines on a gray background from appearing thicker than they actually are (default: [ON]).

Selecting [ON] makes the text and lines on a gray background look to have the same width as the text and lines on a non-gray background.

[Minimal Print]

Select whether to slightly reduce the size of the entire page when directly printing a PDF, PPML, or OOXML (docx, xlsx, or pptx) file (default: [OFF]).

This function is available when printing the entire original image, including its edges.

[OOXML Print Mode]

Select whether to give priority to either the image quality or speed when directly printing an OOXML (docx, xlsx, or pptx) file (default: [Prioritize Speed]).

[Toner Save]

Select whether to save toner consumption by reducing the printing density (default: [OFF]).

[Print/Fax Output]

Select when to start printing received print/fax data.

• [Print]: Select the timing to start printing received data (default: [Save & Print]).
  [Batch Print]: Printing is started after all pages are received.
  [Save & Print]: Printing is started as the first page is received.

• [Fax]: Select the timing to start printing received fax data (default: [Batch Print]).
  [Batch Print]: Printing is started after all pages are received.
  [Save & Print]: Printing is started as the first page is received.
  For Internet Fax, Batch Print is always selected.

[PDL Setting]

Select the Page Description Language (default: [Auto]). When you select [Auto], this machine automatically switches between PCL and PS.

[Image Quality Setting]

Select the optimum quality setting mode for the original (default: [Document]).

• [Document/Photo]: Applies the image quality setting suitable for originals containing multiple elements, such as text, graphs, figures, and photos.

• [Document]: Applies the image quality setting suitable for originals containing texts primarily.

• [Photo]: Applies the image quality setting focused on the image quality.

• [CAD]: Applies the image quality setting suitable for originals composed of thin lines. Images are reproduced in high resolutions.

[Edge Enhancement]

Select whether to highlight edges of an image (default: [OFF]).

Select this option to sharpen the edges of images such as text in the table and graphics to improve legibility when clearing small or faint text.

[Paper Tray]

Specify the paper tray (default: [Auto]).

[2-Sided Print]

Select whether to print an original on both sides of paper when data containing multiple pages is printed (default: [OFF]).

[Binding Position]

Select the binding position for 2-sided printing (default: [Left Bind]).

[Number of Sets]

Enter the number of copies to be printed (default: [1] copy).

[Default Paper Size]

Select the size for the printing paper (the default value varies depending on the area you are in).

[Paper Type]

Select the type for the printing paper (default: [No Selection]).

[Original Direction]

Select the orientation of the image to be printed (default: [Portrait]).

[Spool Print Jobs in HDD before RIP]

When saving the next print job on the storage if the job is received while another print job is being executed, select [ON] (default: [ON]).

[Banner Sheet Setting]

Select whether to print a banner page (front cover) that contains the sender or title of print data (default: [OFF]).

[Banner Sheet Paper Tray]

Select a paper tray to print a banner page (front cover) (default: [Auto]).

[A4/A3 <- -> LTR/LGR Auto Switch]

Select whether to use paper of a size similar to the size specified in [Default Paper Size] if the specified paper is not loaded in the paper tray (default: [OFF]).

In normal circumstances, select [OFF]. When you select [On], size conversion between A4 and Letter automatically occurs and images may be partially lost.

[Binding Direction Adjustment]

Select how the binding position is adjusted on two-sided printed sheets (default: [Finishing Priority]).

• [Finishing Priority]: After all pages are received, the binding position is adjusted and printing is started.

• [Productivity Priority]: Each time a page is received, the binding position is adjusted and printing is started.

• [Control Adjustments]: The printing position is not adjusted. The pages are printed according to the settings specified in the printer driver.

[Line Width Adjustment (600dpi)]

Select how to adjust the text or line width when printing with 600 dpi resolution (default: [Std.]).

• [Thin]: Select this option to draw letters and lines thinly. Details of letters and figures can be printed elaborately.

• [Slightly Thin]: Select this option to draw letters and lines with a thickness between [Thin] and [Std.].

• [Std.]: Select this option to draw letters and lines with a normal thickness.

• [Slightly Thick]: Select this option to draw letters and lines with a thickness between [Std.] and [Thick].

• [Thick]: Select this option to draw letters and lines thickly. Letters and figures are printed clearly.

[Line Width Adjustment (1200dpi)]

Select how to adjust the text or line width when printing with 1200 dpi resolution (default: [Std.]).

• [Thin]: Select this option to draw letters and lines thinly. Details of letters and figures can be printed elaborately.

• [Slightly Thin]: Select this option to draw letters and lines with a thickness between [Thin] and [Std.].

• [Std.]: Select this option to draw letters and lines with a normal thickness.

• [Slightly Thick]: Select this option to draw letters and lines with a thickness between [Std.] and [Thick].

• [Thick]: Select this option to draw letters and lines thickly. Letters and figures are printed clearly.

[Gray Background Text Correction]

Select whether to prevent text or lines on a gray background from appearing thicker than they actually are (default: [ON]).

Selecting [ON] makes the text and lines on a gray background look to have the same width as the text and lines on a non-gray background.

[Minimal Print]

Select whether to slightly reduce the size of the entire page when directly printing a PDF, PPML, or OOXML (docx, xlsx, or pptx) file (default: [OFF]).

This function is available when printing the entire original image, including its edges.

[OOXML Print Mode]

Select whether to give priority to either the image quality or speed when directly printing an OOXML (docx, xlsx, or pptx) file (default: [Prioritize Speed]).

[Toner Save]

Select whether to save toner consumption by reducing the printing density (default: [OFF]).

[Print/Fax Output]

Select when to start printing received print/fax data.

• [Print]: Select the timing to start printing received data (default: [Save & Print]).
  [Batch Print]: Printing is started after all pages are received.
  [Save & Print]: Printing is started as the first page is received.

• [Fax]: Select the timing to start printing received fax data (default: [Batch Print]).
  [Batch Print]: Printing is started after all pages are received.
  [Save & Print]: Printing is started as the first page is received.
  For Internet Fax, Batch Print is always selected.

[PDL Setting]

Select the Page Description Language (default: [Auto]). When you select [Auto], this machine automatically switches between PCL and PS.

[Image Quality Setting]

Select the optimum quality setting mode for the original (default: [Document]).

• [Document/Photo]: Applies the image quality setting suitable for originals containing multiple elements, such as text, graphs, figures, and photos.

• [Document]: Applies the image quality setting suitable for originals containing texts primarily.

• [Photo]: Applies the image quality setting focused on the image quality.

• [CAD]: Applies the image quality setting suitable for originals composed of thin lines. Images are reproduced in high resolutions.

[Edge Enhancement]

Select whether to highlight edges of an image (default: [OFF]).

Select this option to sharpen the edges of images such as text in the table and graphics to improve legibility when clearing small or faint text.

[Paper Tray]

Specify the paper tray (default: [Auto]).

[2-Sided Print]

Select whether to print an original on both sides of paper when data containing multiple pages is printed (default: [OFF]).

[Binding Position]

Select the binding position for 2-sided printing (default: [Left Bind]).

[Number of Sets]

Enter the number of copies to be printed (default: [1] copy).

[Default Paper Size]

Select the size for the printing paper (the default value varies depending on the area you are in).

[Paper Type]

Select the type for the printing paper (default: [No Selection]).

[Original Direction]

Select the orientation of the image to be printed (default: [Portrait]).

[Spool Print Jobs in HDD before RIP]

When saving the next print job on the storage if the job is received while another print job is being executed, select [ON] (default: [ON]).

[Banner Sheet Setting]

Select whether to print a banner page (front cover) that contains the sender or title of print data (default: [OFF]).

[Banner Sheet Paper Tray]

Select a paper tray to print a banner page (front cover) (default: [Auto]).

[A4/A3 <- -> LTR/LGR Auto Switch]

Select whether to use paper of a size similar to the size specified in [Default Paper Size] if the specified paper is not loaded in the paper tray (default: [OFF]).

In normal circumstances, select [OFF]. When you select [On], size conversion between A4 and Letter automatically occurs and images may be partially lost.

[Binding Direction Adjustment]

Select how the binding position is adjusted on two-sided printed sheets (default: [Finishing Priority]).

• [Finishing Priority]: After all pages are received, the binding position is adjusted and printing is started.

• [Productivity Priority]: Each time a page is received, the binding position is adjusted and printing is started.

• [Control Adjustments]: The printing position is not adjusted. The pages are printed according to the settings specified in the printer driver.

[Line Width Adjustment (600dpi)]

Select how to adjust the text or line width when printing with 600 dpi resolution (default: [Std.]).

• [Thin]: Select this option to draw letters and lines thinly. Details of letters and figures can be printed elaborately.

• [Slightly Thin]: Select this option to draw letters and lines with a thickness between [Thin] and [Std.].

• [Std.]: Select this option to draw letters and lines with a normal thickness.

• [Slightly Thick]: Select this option to draw letters and lines with a thickness between [Std.] and [Thick].

• [Thick]: Select this option to draw letters and lines thickly. Letters and figures are printed clearly.

[Line Width Adjustment (1200dpi)]

Select how to adjust the text or line width when printing with 1200 dpi resolution (default: [Std.]).

• [Thin]: Select this option to draw letters and lines thinly. Details of letters and figures can be printed elaborately.

• [Slightly Thin]: Select this option to draw letters and lines with a thickness between [Thin] and [Std.].

• [Std.]: Select this option to draw letters and lines with a normal thickness.

• [Slightly Thick]: Select this option to draw letters and lines with a thickness between [Std.] and [Thick].

• [Thick]: Select this option to draw letters and lines thickly. Letters and figures are printed clearly.

[Gray Background Text Correction]

Select whether to prevent text or lines on a gray background from appearing thicker than they actually are (default: [ON]).

Selecting [ON] makes the text and lines on a gray background look to have the same width as the text and lines on a non-gray background.

[Minimal Print]

Select whether to slightly reduce the size of the entire page when directly printing a PDF, PPML, or OOXML (docx, xlsx, or pptx) file (default: [OFF]).

This function is available when printing the entire original image, including its edges.

[OOXML Print Mode]

Select whether to give priority to either the image quality or speed when directly printing an OOXML (docx, xlsx, or pptx) file (default: [Prioritize Speed]).

[Toner Save]

Select whether to save toner consumption by reducing the printing density (default: [OFF]).

[Print/Fax Output]

Select when to start printing received print/fax data.

• [Print]: Select the timing to start printing received data (default: [Save & Print]).
  [Batch Print]: Printing is started after all pages are received.
  [Save & Print]: Printing is started as the first page is received.

• [Fax]: Select the timing to start printing received fax data (default: [Batch Print]).
  [Batch Print]: Printing is started after all pages are received.
  [Save & Print]: Printing is started as the first page is received.
  For Internet Fax, Batch Print is always selected.

[PDL Setting]

Select the Page Description Language (default: [Auto]). When you select [Auto], this machine automatically switches between PCL and PS.

[Image Quality Setting]

Select the optimum quality setting mode for the original (default: [Document]).

• [Document/Photo]: Applies the image quality setting suitable for originals containing multiple elements, such as text, graphs, figures, and photos.

• [Document]: Applies the image quality setting suitable for originals containing texts primarily.

• [Photo]: Applies the image quality setting focused on the image quality.

• [CAD]: Applies the image quality setting suitable for originals composed of thin lines. Images are reproduced in high resolutions.

[Edge Enhancement]

Select whether to highlight edges of an image (default: [OFF]).

Select this option to sharpen the edges of images such as text in the table and graphics to improve legibility when clearing small or faint text.

[Paper Tray]

Specify the paper tray (default: [Auto]).

[2-Sided Print]

Select whether to print an original on both sides of paper when data containing multiple pages is printed (default: [OFF]).

[Binding Position]

Select the binding position for 2-sided printing (default: [Left Bind]).

[Number of Sets]

Enter the number of copies to be printed (default: [1] copy).

[Default Paper Size]

Select the size for the printing paper (the default value varies depending on the area you are in).

[Paper Type]

Select the type for the printing paper (default: [No Selection]).

[Original Direction]

Select the orientation of the image to be printed (default: [Portrait]).

[Spool Print Jobs in HDD before RIP]

When saving the next print job on the storage if the job is received while another print job is being executed, select [ON] (default: [ON]).

[Banner Sheet Setting]

Select whether to print a banner page (front cover) that contains the sender or title of print data (default: [OFF]).

[Banner Sheet Paper Tray]

Select a paper tray to print a banner page (front cover) (default: [Auto]).

[A4/A3 <- -> LTR/LGR Auto Switch]

Select whether to use paper of a size similar to the size specified in [Default Paper Size] if the specified paper is not loaded in the paper tray (default: [OFF]).

In normal circumstances, select [OFF]. When you select [On], size conversion between A4 and Letter automatically occurs and images may be partially lost.

[Binding Direction Adjustment]

Select how the binding position is adjusted on two-sided printed sheets (default: [Finishing Priority]).

• [Finishing Priority]: After all pages are received, the binding position is adjusted and printing is started.

• [Productivity Priority]: Each time a page is received, the binding position is adjusted and printing is started.

• [Control Adjustments]: The printing position is not adjusted. The pages are printed according to the settings specified in the printer driver.

[Line Width Adjustment (600dpi)]

Select how to adjust the text or line width when printing with 600 dpi resolution (default: [Std.]).

• [Thin]: Select this option to draw letters and lines thinly. Details of letters and figures can be printed elaborately.

• [Slightly Thin]: Select this option to draw letters and lines with a thickness between [Thin] and [Std.].

• [Std.]: Select this option to draw letters and lines with a normal thickness.

• [Slightly Thick]: Select this option to draw letters and lines with a thickness between [Std.] and [Thick].

• [Thick]: Select this option to draw letters and lines thickly. Letters and figures are printed clearly.

[Line Width Adjustment (1200dpi)]

Select how to adjust the text or line width when printing with 1200 dpi resolution (default: [Std.]).

• [Thin]: Select this option to draw letters and lines thinly. Details of letters and figures can be printed elaborately.

• [Slightly Thin]: Select this option to draw letters and lines with a thickness between [Thin] and [Std.].

• [Std.]: Select this option to draw letters and lines with a normal thickness.

• [Slightly Thick]: Select this option to draw letters and lines with a thickness between [Std.] and [Thick].

• [Thick]: Select this option to draw letters and lines thickly. Letters and figures are printed clearly.

[Gray Background Text Correction]

Select whether to prevent text or lines on a gray background from appearing thicker than they actually are (default: [ON]).

Selecting [ON] makes the text and lines on a gray background look to have the same width as the text and lines on a non-gray background.

[Minimal Print]

Select whether to slightly reduce the size of the entire page when directly printing a PDF, PPML, or OOXML (docx, xlsx, or pptx) file (default: [OFF]).

This function is available when printing the entire original image, including its edges.

[OOXML Print Mode]

Select whether to give priority to either the image quality or speed when directly printing an OOXML (docx, xlsx, or pptx) file (default: [Prioritize Speed]).

[Toner Save]

Select whether to save toner consumption by reducing the printing density (default: [OFF]).

[Print/Fax Output]

Select when to start printing received print/fax data.

• [Print]: Select the timing to start printing received data (default: [Save & Print]).
  [Batch Print]: Printing is started after all pages are received.
  [Save & Print]: Printing is started as the first page is received.

• [Fax]: Select the timing to start printing received fax data (default: [Batch Print]).
  [Batch Print]: Printing is started after all pages are received.
  [Save & Print]: Printing is started as the first page is received.
  For Internet Fax, Batch Print is always selected.

[PDL Setting]

Select the Page Description Language (default: [Auto]). When you select [Auto], this machine automatically switches between PCL and PS.

[Image Quality Setting]

Select the optimum quality setting mode for the original (default: [Document]).

• [Document/Photo]: Applies the image quality setting suitable for originals containing multiple elements, such as text, graphs, figures, and photos.

• [Document]: Applies the image quality setting suitable for originals containing texts primarily.

• [Photo]: Applies the image quality setting focused on the image quality.

• [CAD]: Applies the image quality setting suitable for originals composed of thin lines. Images are reproduced in high resolutions.

[Edge Enhancement]

Select whether to highlight edges of an image (default: [OFF]).

Select this option to sharpen the edges of images such as text in the table and graphics to improve legibility when clearing small or faint text.

[Paper Tray]

Specify the paper tray (default: [Auto]).

[2-Sided Print]

Select whether to print an original on both sides of paper when data containing multiple pages is printed (default: [OFF]).

[Binding Position]

Select the binding position for 2-sided printing (default: [Left Bind]).

[Number of Sets]

Enter the number of copies to be printed (default: [1] copy).

[Default Paper Size]

Select the size for the printing paper (the default value varies depending on the area you are in).

[Paper Type]

Select the type for the printing paper (default: [No Selection]).

[Original Direction]

Select the orientation of the image to be printed (default: [Portrait]).

[Spool Print Jobs in HDD before RIP]

When saving the next print job on the storage if the job is received while another print job is being executed, select [ON] (default: [ON]).

[Banner Sheet Setting]

Select whether to print a banner page (front cover) that contains the sender or title of print data (default: [OFF]).

[Banner Sheet Paper Tray]

Select a paper tray to print a banner page (front cover) (default: [Auto]).

[A4/A3 <- -> LTR/LGR Auto Switch]

Select whether to use paper of a size similar to the size specified in [Default Paper Size] if the specified paper is not loaded in the paper tray (default: [OFF]).

In normal circumstances, select [OFF]. When you select [On], size conversion between A4 and Letter automatically occurs and images may be partially lost.

[Binding Direction Adjustment]

Select how the binding position is adjusted on two-sided printed sheets (default: [Finishing Priority]).

• [Finishing Priority]: After all pages are received, the binding position is adjusted and printing is started.

• [Productivity Priority]: Each time a page is received, the binding position is adjusted and printing is started.

• [Control Adjustments]: The printing position is not adjusted. The pages are printed according to the settings specified in the printer driver.

[Line Width Adjustment (600dpi)]

Select how to adjust the text or line width when printing with 600 dpi resolution (default: [Std.]).

• [Thin]: Select this option to draw letters and lines thinly. Details of letters and figures can be printed elaborately.

• [Slightly Thin]: Select this option to draw letters and lines with a thickness between [Thin] and [Std.].

• [Std.]: Select this option to draw letters and lines with a normal thickness.

• [Slightly Thick]: Select this option to draw letters and lines with a thickness between [Std.] and [Thick].

• [Thick]: Select this option to draw letters and lines thickly. Letters and figures are printed clearly.

[Line Width Adjustment (1200dpi)]

Select how to adjust the text or line width when printing with 1200 dpi resolution (default: [Std.]).

• [Thin]: Select this option to draw letters and lines thinly. Details of letters and figures can be printed elaborately.

• [Slightly Thin]: Select this option to draw letters and lines with a thickness between [Thin] and [Std.].

• [Std.]: Select this option to draw letters and lines with a normal thickness.

• [Slightly Thick]: Select this option to draw letters and lines with a thickness between [Std.] and [Thick].

• [Thick]: Select this option to draw letters and lines thickly. Letters and figures are printed clearly.

[Gray Background Text Correction]

Select whether to prevent text or lines on a gray background from appearing thicker than they actually are (default: [ON]).

Selecting [ON] makes the text and lines on a gray background look to have the same width as the text and lines on a non-gray background.

[Minimal Print]

Select whether to slightly reduce the size of the entire page when directly printing a PDF, PPML, or OOXML (docx, xlsx, or pptx) file (default: [OFF]).

This function is available when printing the entire original image, including its edges.

[OOXML Print Mode]

Select whether to give priority to either the image quality or speed when directly printing an OOXML (docx, xlsx, or pptx) file (default: [Prioritize Speed]).

[Toner Save]

Select whether to save toner consumption by reducing the printing density (default: [OFF]).

[Print/Fax Output]

Select when to start printing received print/fax data.

• [Print]: Select the timing to start printing received data (default: [Save & Print]).
  [Batch Print]: Printing is started after all pages are received.
  [Save & Print]: Printing is started as the first page is received.

• [Fax]: Select the timing to start printing received fax data (default: [Batch Print]).
  [Batch Print]: Printing is started after all pages are received.
  [Save & Print]: Printing is started as the first page is received.
  For Internet Fax, Batch Print is always selected.

[PDL Setting]

Select the Page Description Language (default: [Auto]). When you select [Auto], this machine automatically switches between PCL and PS.

[Image Quality Setting]

Select the optimum quality setting mode for the original (default: [Document]).

• [Document/Photo]: Applies the image quality setting suitable for originals containing multiple elements, such as text, graphs, figures, and photos.

• [Document]: Applies the image quality setting suitable for originals containing texts primarily.

• [Photo]: Applies the image quality setting focused on the image quality.

• [CAD]: Applies the image quality setting suitable for originals composed of thin lines. Images are reproduced in high resolutions.

[Edge Enhancement]

Select whether to highlight edges of an image (default: [OFF]).

Select this option to sharpen the edges of images such as text in the table and graphics to improve legibility when clearing small or faint text.

[Paper Tray]

Specify the paper tray (default: [Auto]).

[2-Sided Print]

Select whether to print an original on both sides of paper when data containing multiple pages is printed (default: [OFF]).

[Binding Position]

Select the binding position for 2-sided printing (default: [Left Bind]).

[Number of Sets]

Enter the number of copies to be printed (default: [1] copy).

[Default Paper Size]

Select the size for the printing paper (the default value varies depending on the area you are in).

[Paper Type]

Select the type for the printing paper (default: [No Selection]).

[Original Direction]

Select the orientation of the image to be printed (default: [Portrait]).

[Spool Print Jobs in HDD before RIP]

When saving the next print job on the storage if the job is received while another print job is being executed, select [ON] (default: [ON]).

[Banner Sheet Setting]

Select whether to print a banner page (front cover) that contains the sender or title of print data (default: [OFF]).

[Banner Sheet Paper Tray]

Select a paper tray to print a banner page (front cover) (default: [Auto]).

[A4/A3 <- -> LTR/LGR Auto Switch]

Select whether to use paper of a size similar to the size specified in [Default Paper Size] if the specified paper is not loaded in the paper tray (default: [OFF]).

In normal circumstances, select [OFF]. When you select [On], size conversion between A4 and Letter automatically occurs and images may be partially lost.

[Binding Direction Adjustment]

Select how the binding position is adjusted on two-sided printed sheets (default: [Finishing Priority]).

• [Finishing Priority]: After all pages are received, the binding position is adjusted and printing is started.

• [Productivity Priority]: Each time a page is received, the binding position is adjusted and printing is started.

• [Control Adjustments]: The printing position is not adjusted. The pages are printed according to the settings specified in the printer driver.

[Line Width Adjustment (600dpi)]

Select how to adjust the text or line width when printing with 600 dpi resolution (default: [Std.]).

• [Thin]: Select this option to draw letters and lines thinly. Details of letters and figures can be printed elaborately.

• [Slightly Thin]: Select this option to draw letters and lines with a thickness between [Thin] and [Std.].

• [Std.]: Select this option to draw letters and lines with a normal thickness.

• [Slightly Thick]: Select this option to draw letters and lines with a thickness between [Std.] and [Thick].

• [Thick]: Select this option to draw letters and lines thickly. Letters and figures are printed clearly.

[Line Width Adjustment (1200dpi)]

Select how to adjust the text or line width when printing with 1200 dpi resolution (default: [Std.]).

• [Thin]: Select this option to draw letters and lines thinly. Details of letters and figures can be printed elaborately.

• [Slightly Thin]: Select this option to draw letters and lines with a thickness between [Thin] and [Std.].

• [Std.]: Select this option to draw letters and lines with a normal thickness.

• [Slightly Thick]: Select this option to draw letters and lines with a thickness between [Std.] and [Thick].

• [Thick]: Select this option to draw letters and lines thickly. Letters and figures are printed clearly.

[Gray Background Text Correction]

Select whether to prevent text or lines on a gray background from appearing thicker than they actually are (default: [ON]).

Selecting [ON] makes the text and lines on a gray background look to have the same width as the text and lines on a non-gray background.

[Minimal Print]

Select whether to slightly reduce the size of the entire page when directly printing a PDF, PPML, or OOXML (docx, xlsx, or pptx) file (default: [OFF]).

This function is available when printing the entire original image, including its edges.

[OOXML Print Mode]

Select whether to give priority to either the image quality or speed when directly printing an OOXML (docx, xlsx, or pptx) file (default: [Prioritize Speed]).

[Toner Save]

Select whether to save toner consumption by reducing the printing density (default: [OFF]).

[Print/Fax Output]

Select when to start printing received print/fax data.

• [Print]: Select the timing to start printing received data (default: [Save & Print]).
  [Batch Print]: Printing is started after all pages are received.
  [Save & Print]: Printing is started as the first page is received.

• [Fax]: Select the timing to start printing received fax data (default: [Batch Print]).
  [Batch Print]: Printing is started after all pages are received.
  [Save & Print]: Printing is started as the first page is received.
  For Internet Fax, Batch Print is always selected.

[XPS/OOXML/PDF Digital Signature]

When verifying the digital signature to print an XPS, OOXML (docx, xlsx, or pptx), or PDF file with the digital signature added, set this option to ON (default: OFF).

When ON is selected, the data is not printed if the signature is invalid.

[Sheet/Book Print]

Select whether to print the currently selected sheet or the entire book when handling an Excel file (default: [Current Sheet]).

[Default Paper Size]

Select a paper size to print an OOXML (docx, xlsx, or pptx) file (default: [Auto]).

[Paper Type]

Select a paper type to print an OOXML (docx, xlsx, or pptx) file (default: [Auto]).

[Combination]

When reducing multiple pages to the same side of one sheet in order to print them, set this option to ON (default: OFF).

[Number of Page Combinations]

Specify the number of pages to place on a single sheet.

• [Column]: Enter the number of pages to be placed in the vertical direction of a single sheet (default: [1]).

• [Row]: Enter the number of pages to be placed in the horizontal direction of a single sheet (default: [1]).

[Combine Direction]

Select the page arrangement order (default: [Horizontal]).

[Combination Direction]

Select the page arrangement direction (default: [Top left to Bottom right]).

[Page Spacing]

Specify a page space in row and column directions (default: [0] inch (0 mm)).

[Margin]

Specify a page margin at the top, bottom, right and left positions (default: [0] inch (0 mm)).

[Page Zoom]

Specify any scale to enlarge or reduce the page size (default: [Auto]).

[Page Frame]

Select whether to print a border line between pages (default: [Do Not Print]).

[Auto Paper Select]

Select the method to determine the printing paper size (default: [Auto]).

• [Auto]: TIFF/JPEG (JFIF)/PDF images are printed on paper of the same size as the image.
  However, a JPEG (EXIF) image is enlarged or reduced for printing to fit the paper size specified in [Basic Setting] - [Default Paper Size].

• [Priority Paper Size]: Prints an image on the paper of the size specified in [Basic Setting] - [Default Paper Size].

[Print]

Select the timing to start printing received data (default: [Save & Print]).

• [Batch Print]: Printing is started after all pages are received.

• [Save & Print]: Printing is started as the first page is received.

[Fax]

Select the timing to start printing received fax data (default: [Batch Print]).

• [Batch Print]: Printing is started after all pages are received.

• [Save & Print]: Printing is started as the first page is received.
  For Internet Fax, Batch Print is always selected.

[Network Timeout]

When this machine is connected via a network to the computer, change the communication time-out time (default: [60] sec.).

[USB Timeout]

When this machine is connected via a USB device to the computer, change the communication time-out time (default: [60] sec.).

[Network Timeout]

When this machine is connected via a network to the computer, change the communication time-out time (default: [60] sec.).

[USB Timeout]

When this machine is connected via a USB device to the computer, change the communication time-out time (default: [60] sec.).

[Print XPS/OOXML Errors]

To print error information when an error occurs during printing of an XPS or OOXML (docx, xlsx, or pptx) file, set this option to ON (default: ON).

[Assign Account to Acquire Device Info]

When restricting the acquirement of device information from the printer driver using the password, set this option to ON (default: OFF).

• [Password]: Enter a password to restrict device information to be obtained (using up to eight characters, excluding spaces and "). Inform users who obtain device information from the printer driver of the password you have entered in this field.

[Brightness]

Adjust the brightness to print data from a computer (default: [0]).

To make adjustments, the adjustment value specified here is added to that of the brightness specified in the PCL driver.

[Contrast]

Adjust the contrast to print data from a computer (default: [0]).

To make adjustments, the adjustment value specified here is added to that of the contrast specified in the PCL driver.

[Brightness]

Adjust the brightness to print data from a computer (default: [0]).

To make adjustments, the adjustment value specified here is added to that of the brightness specified in the PS driver.

[Contrast]

Adjust the contrast to print data from a computer (default: [0]).

To make adjustments, the adjustment value specified here is added to that of the contrast specified in the PS driver.