HomeSearch by PurposeAdjusting the Layout for Copying

Search by Purpose

Adjusting the Layout for Copying

To enlarge or reduce an image for copying ([Zoom])

To display:
  • [Classic Style]
    • [Copy]
      • [Zoom]

Copy an original image enlarged or reduced by an arbitrary zoom ratio.

Setting

Description

[Auto]

Automatically makes a copy with the optimal zoom ratio to match the image of the original with the paper size. This is convenient because you do not need to specify the zoom ratio.

[+]/[-]

Enter the zoom ratio manually.

Fixed Zoom

Select a preset zoom ratio when copying a standard-size original onto standard-size paper.

The paper tray is automatically exchanged depending on the selected zoom ratio.

[Minimal]

Places an original image in the center after slightly reducing the original size when copying.

Select this option when copying the entire original image, including its edges.

[Manual]

Specify zoom ratios individually for the lengthwise and widthwise directions for copying.

Select [X] or [Y], and enter the zoom ratio.

[Zoom Ratio]

Makes a copy at the registered zoom ratio.

If you tap [Set Zoom], you can change the registered zoom ratio.

To copy the original image to the center of paper ([Image Adjust])

To display:
  • [Classic Style]
    • [Copy]
      • [Application]
        • [Layout]
          • [Image Adjust]

Copy while placed at the center of paper with the original size unchanged.

Setting

Description

[ON]/[OFF]

Select [ON] to specify Image Adjust.

[Original Size]

Select the size of the original to be scanned.

To reverse the left and right of the original image ([Mirror Image])

To display:
  • [Classic Style]
    • [Copy]
      • [Application]
        • [Layout]
          • [Mirror Image]

Copy the original image by reversing its left and right, like a reflection image on the mirror.

Setting

Description

[ON]/[OFF]

Select [ON] to specify Mirror Image.

[Original Size]

Select the size of the original to be scanned.

To fine-adjust the print position ([Image Shift])

To display:
  • [Classic Style]
    • [Copy]
      • [Application]
        • [Layout]
          • [Image Shift]

You can fine tune the image position by shifting it in a horizontal or vertical direction according to the paper size. When an image is printed on both sides, the image position on the back side can also be fine tuned.

Setting

Description

[ON]/[OFF]

Select [ON] to shift an image.

[Front Side]/[Back Side]

Adjusts the image position on the print paper by shifting it in horizontal or vertical direction.

  • [Shift Left]/[Shift Right]: Shifts the image to the left or right. Select the shift direction, and specify the shift amount in [Shift Width].

  • [Shift Top]/[Shift Bottom]: Shifts the image upward or downward. Select the shift direction, and specify the shift amount in [Shift Width].

[Apply on Back]

Set this item to use the same settings as used on the front side for the rear side of the print paper.

[Original Direction]

Specify the original loading direction so that the vertical direction of the scanned original is set correctly.