Power Supply/Power Save Settings

[Low Power Mode Settings]

Change the time required to automatically change to the Low Power mode after you did not operate this machine.

For details, refer to Here.

[Sleep Mode Settings]

Change the time period before the machine enters the Sleep mode after the last action is carried out.

For details, refer to Here.

[Power Key Setting]

Select whether to use the Power key on the Control Panel as a sub power OFF key or as a power save key.

For details, refer to Here.

[Power Save Settings]

When using this machine in the factory default status, choose this setting to select the type of the power save mode when pressing the Power key on the Control Panel.

For details, refer to Here.

[Enter Power Save Mode]

Select the timing for the machine to return to the Power Save mode after printing a job it has received in the Power Save mode from a fax machine or computer.

For details, refer to Here.

[Power Consumption in Sleep Mode]

Select whether to reduce the power consumption in the Sleep mode.

For details, refer to Here.

[Power Saving Fax/Scan]

Select whether to give priority to the power saving when returning from the Sleep or sub power off mode to a mode other than the copy mode.

When returning to a non-printing mode such as the Scan/Fax mode, the temperature of the Fusing Unit in this machine is not adjusted, by which power consumption is reduced.

For details, refer to Here.

[Awake from Power Save Mode by Touching Control Panel]

When Low Power mode or Sleep mode has been established: if hands or man get closer to Touch Panel, you can select whether to restore or not from Low Power mode or Sleep mode.

For details, refer to Here.