Home>Descriptions of Functions / Utility Keys>Forward TX Setting

Descriptions of Functions / Utility Keys

Forward TX Setting

To display: >>View
  • [Utility]
    • [Administrator Settings]
      • [Fax Settings]
        • [Function Settings]
          • [Forward TX Setting]

Configure the settings for using the Forward TX function.

Forward TX is a function that transfers a received fax to a pre-specified destination.

Settings

Description

[Yes]/[No]

Select whether to use Forward TX.

[No] is specified by default.

[Output Method]

Select whether to print a received fax on this machine when forwarding it.

  • [Forward & Print]: A received fax is forwarded and printed on this machine.

  • [Forward & Print (If TX Fails)]: A received fax is forwarded and printed on this machine.

[Forward Dest.]

Specify a destination where to forward a received fax.

Directly enter the appropriate fax number using the Keypad, or tap [Select from Address Book] and select one of the destinations registered on this machine.

You can specify [File Type] and convert a fax into a file except when the destination is a fax machine.

[Select Line]

If two lines are used, select the line used to send a fax. If [No Selection] is specified, either line, whichever is not busy, is used for transmission.

[No Selection] is selected by default.