Connecting to the TCP/IP Environment

To assign the IPv4 address to this machine ([IPv4])

To display:

[Utility]
- [Administrator]
  - [Network]
    - [TCP/IP Setting]
      - [TCP/IP Setting1]

Configure the settings to use this machine in a TCP/IP environment.

Setting	Description
[TCP/IP]	When enabling TCP/IP, set this option to ON (default: ON).
[Network Speed]	Select the network speed according to your environment (default: [Auto (10M/100M/1Gbps)]).
[IPv4]	When connecting this machine to the IPv4 environment, specify the IPv4 address. [IP Address Setting Method]: Select the method to specify the IP address to this machine according to your environment (default: [Auto Setting]). To manually specify the IP address, select [Manual Setting]. To automatically specify the IP address using DHCP, select [Auto Setting], and specify the automatic setting method. [IP Address]: When manually specifying the IP address, enter the fixed IP address assigned to the machine. [Subnet Mask]: When manually specifying the IP address, enter the subnet mask. [Default Gateway]: When manually specifying the IP address, enter the default gateway.
[IPv6]	When connecting this machine to the IPv6 environment, specify the IPv6 address. [IPv6]: When using IPv6, set this option to ON (default: ON). [Auto IPv6 Setting]: When automatically specifying the IPv6 global address, set this option to ON (default: ON). The IPv6 global address is automatically set based on the prefix length notified from the router and the MAC address of this machine. [DHCPv6 Setting]: When automatically specifying the IPv6 global address using DHCPv6, set this option to ON (default: ON). [Link-Local Address]: Displays the link-local address. The link-local address is automatically specified from the MAC address of this machine. [Global Address]: When manually specifying the address, enter the IPv6 global address. [Prefix Length]: When manually specifying the address, enter the prefix length of the IPv6 global address between 1 and 128. [Gateway Address]: When manually specifying the address, enter the gateway address.
[DNS Host]	When using the host name to connect to this machine, register the host name of this machine. [DNS Host Name]: Enter the host name of this machine (using up to 63 characters, including only - for symbol marks). If your DNS server does not support the Dynamic DNS function, register the host name of this machine on the DNS server. [Dynamic DNS Setting]: When using the Dynamic DNS, set this option to ON (default: OFF). If your DNS server supports the Dynamic DNS function, the set host name can be automatically registered to the DNS server or changes can be automatically updated. [LLMNR Setting]: When using LLMNR, set this option to ON (default: ON). Using LLMNR enables you to resolve the name even in an environment that does not have a DNS server. This option is only compatible with Windows computers. It is useful to resolve the name in the IPv6 environment.
[DNS Domain Name Setting]	Register the name of a domain this machine joins. [DNS Domain Auto Obtain]: When automatically specifying the domain name using DHCP, set this option to ON (default: ON). [DNS Search Domain Name Auto Retrieval]: When automatically specifying the search domain name using DHCP, set this option to ON (default: ON). [DNS Default Domain Name]: When manually specifying the domain name, enter the default domain name of this machine (using up to 253 bytes, including the host name, - and . for symbol marks). [DNS Search Domain Name1] to [DNS Search Domain Name3]: When manually specifying the domain name, enter the search domain name (using up to 63 characters, including only - and . for symbol marks).
[DNS Server Setting(IPv4)]	When DNS is installed in your environment, register the DNS server. [DNS Server Auto Obtain]: When automatically specifying the DNS server address using DHCP, set this option to ON (default: ON). [Primary DNS Server]: When manually specifying the address, enter the primary DNS server address. [Secondary DNS Server1] / [Secondary DNS Server2]: When manually specifying the address, enter the secondary DNS server address.
[DNS Server Setting(IPv6)]	When DNS is installed in your environment, register the DNS server. [DNS Server Auto Obtain]: When automatically specifying the DNS server address using DHCP, set this option to ON (default: ON). [Primary DNS Server]: When manually specifying the address, enter the primary DNS server address. [Secondary DNS Server1] / [Secondary DNS Server2]: When manually specifying the address, enter the secondary DNS server address.

To assign the IPv6 address to this machine ([IPv6])

To display:

[Utility]
- [Administrator]
  - [Network]
    - [TCP/IP Setting]
      - [TCP/IP Setting1]

Configure the settings to use this machine in a TCP/IP environment.

Setting	Description
[TCP/IP]	When enabling TCP/IP, set this option to ON (default: ON).
[Network Speed]	Select the network speed according to your environment (default: [Auto (10M/100M/1Gbps)]).
[IPv4]	When connecting this machine to the IPv4 environment, specify the IPv4 address. [IP Address Setting Method]: Select the method to specify the IP address to this machine according to your environment (default: [Auto Setting]). To manually specify the IP address, select [Manual Setting]. To automatically specify the IP address using DHCP, select [Auto Setting], and specify the automatic setting method. [IP Address]: When manually specifying the IP address, enter the fixed IP address assigned to the machine. [Subnet Mask]: When manually specifying the IP address, enter the subnet mask. [Default Gateway]: When manually specifying the IP address, enter the default gateway.
[IPv6]	When connecting this machine to the IPv6 environment, specify the IPv6 address. [IPv6]: When using IPv6, set this option to ON (default: ON). [Auto IPv6 Setting]: When automatically specifying the IPv6 global address, set this option to ON (default: ON). The IPv6 global address is automatically set based on the prefix length notified from the router and the MAC address of this machine. [DHCPv6 Setting]: When automatically specifying the IPv6 global address using DHCPv6, set this option to ON (default: ON). [Link-Local Address]: Displays the link-local address. The link-local address is automatically specified from the MAC address of this machine. [Global Address]: When manually specifying the address, enter the IPv6 global address. [Prefix Length]: When manually specifying the address, enter the prefix length of the IPv6 global address between 1 and 128. [Gateway Address]: When manually specifying the address, enter the gateway address.
[DNS Host]	When using the host name to connect to this machine, register the host name of this machine. [DNS Host Name]: Enter the host name of this machine (using up to 63 characters, including only - for symbol marks). If your DNS server does not support the Dynamic DNS function, register the host name of this machine on the DNS server. [Dynamic DNS Setting]: When using the Dynamic DNS, set this option to ON (default: OFF). If your DNS server supports the Dynamic DNS function, the set host name can be automatically registered to the DNS server or changes can be automatically updated. [LLMNR Setting]: When using LLMNR, set this option to ON (default: ON). Using LLMNR enables you to resolve the name even in an environment that does not have a DNS server. This option is only compatible with Windows computers. It is useful to resolve the name in the IPv6 environment.
[DNS Domain Name Setting]	Register the name of a domain this machine joins. [DNS Domain Auto Obtain]: When automatically specifying the domain name using DHCP, set this option to ON (default: ON). [DNS Search Domain Name Auto Retrieval]: When automatically specifying the search domain name using DHCP, set this option to ON (default: ON). [DNS Default Domain Name]: When manually specifying the domain name, enter the default domain name of this machine (using up to 253 bytes, including the host name, - and . for symbol marks). [DNS Search Domain Name1] to [DNS Search Domain Name3]: When manually specifying the domain name, enter the search domain name (using up to 63 characters, including only - and . for symbol marks).
[DNS Server Setting(IPv4)]	When DNS is installed in your environment, register the DNS server. [DNS Server Auto Obtain]: When automatically specifying the DNS server address using DHCP, set this option to ON (default: ON). [Primary DNS Server]: When manually specifying the address, enter the primary DNS server address. [Secondary DNS Server1] / [Secondary DNS Server2]: When manually specifying the address, enter the secondary DNS server address.
[DNS Server Setting(IPv6)]	When DNS is installed in your environment, register the DNS server. [DNS Server Auto Obtain]: When automatically specifying the DNS server address using DHCP, set this option to ON (default: ON). [Primary DNS Server]: When manually specifying the address, enter the primary DNS server address. [Secondary DNS Server1] / [Secondary DNS Server2]: When manually specifying the address, enter the secondary DNS server address.

To register the host name of this machine ([DNS Host])

To display:

[Utility]
- [Administrator]
  - [Network]
    - [TCP/IP Setting]
      - [TCP/IP Setting1]

Configure the settings to use this machine in a TCP/IP environment.

Setting	Description
[TCP/IP]	When enabling TCP/IP, set this option to ON (default: ON).
[Network Speed]	Select the network speed according to your environment (default: [Auto (10M/100M/1Gbps)]).
[IPv4]	When connecting this machine to the IPv4 environment, specify the IPv4 address. [IP Address Setting Method]: Select the method to specify the IP address to this machine according to your environment (default: [Auto Setting]). To manually specify the IP address, select [Manual Setting]. To automatically specify the IP address using DHCP, select [Auto Setting], and specify the automatic setting method. [IP Address]: When manually specifying the IP address, enter the fixed IP address assigned to the machine. [Subnet Mask]: When manually specifying the IP address, enter the subnet mask. [Default Gateway]: When manually specifying the IP address, enter the default gateway.
[IPv6]	When connecting this machine to the IPv6 environment, specify the IPv6 address. [IPv6]: When using IPv6, set this option to ON (default: ON). [Auto IPv6 Setting]: When automatically specifying the IPv6 global address, set this option to ON (default: ON). The IPv6 global address is automatically set based on the prefix length notified from the router and the MAC address of this machine. [DHCPv6 Setting]: When automatically specifying the IPv6 global address using DHCPv6, set this option to ON (default: ON). [Link-Local Address]: Displays the link-local address. The link-local address is automatically specified from the MAC address of this machine. [Global Address]: When manually specifying the address, enter the IPv6 global address. [Prefix Length]: When manually specifying the address, enter the prefix length of the IPv6 global address between 1 and 128. [Gateway Address]: When manually specifying the address, enter the gateway address.
[DNS Host]	When using the host name to connect to this machine, register the host name of this machine. [DNS Host Name]: Enter the host name of this machine (using up to 63 characters, including only - for symbol marks). If your DNS server does not support the Dynamic DNS function, register the host name of this machine on the DNS server. [Dynamic DNS Setting]: When using the Dynamic DNS, set this option to ON (default: OFF). If your DNS server supports the Dynamic DNS function, the set host name can be automatically registered to the DNS server or changes can be automatically updated. [LLMNR Setting]: When using LLMNR, set this option to ON (default: ON). Using LLMNR enables you to resolve the name even in an environment that does not have a DNS server. This option is only compatible with Windows computers. It is useful to resolve the name in the IPv6 environment.
[DNS Domain Name Setting]	Register the name of a domain this machine joins. [DNS Domain Auto Obtain]: When automatically specifying the domain name using DHCP, set this option to ON (default: ON). [DNS Search Domain Name Auto Retrieval]: When automatically specifying the search domain name using DHCP, set this option to ON (default: ON). [DNS Default Domain Name]: When manually specifying the domain name, enter the default domain name of this machine (using up to 253 bytes, including the host name, - and . for symbol marks). [DNS Search Domain Name1] to [DNS Search Domain Name3]: When manually specifying the domain name, enter the search domain name (using up to 63 characters, including only - and . for symbol marks).
[DNS Server Setting(IPv4)]	When DNS is installed in your environment, register the DNS server. [DNS Server Auto Obtain]: When automatically specifying the DNS server address using DHCP, set this option to ON (default: ON). [Primary DNS Server]: When manually specifying the address, enter the primary DNS server address. [Secondary DNS Server1] / [Secondary DNS Server2]: When manually specifying the address, enter the secondary DNS server address.
[DNS Server Setting(IPv6)]	When DNS is installed in your environment, register the DNS server. [DNS Server Auto Obtain]: When automatically specifying the DNS server address using DHCP, set this option to ON (default: ON). [Primary DNS Server]: When manually specifying the address, enter the primary DNS server address. [Secondary DNS Server1] / [Secondary DNS Server2]: When manually specifying the address, enter the secondary DNS server address.

To register the name of the domain this machine joins ([DNS Domain Name Setting])

To display:

[Utility]
- [Administrator]
  - [Network]
    - [TCP/IP Setting]
      - [TCP/IP Setting1]

Configure the settings to use this machine in a TCP/IP environment.

Setting	Description
[TCP/IP]	When enabling TCP/IP, set this option to ON (default: ON).
[Network Speed]	Select the network speed according to your environment (default: [Auto (10M/100M/1Gbps)]).
[IPv4]	When connecting this machine to the IPv4 environment, specify the IPv4 address. [IP Address Setting Method]: Select the method to specify the IP address to this machine according to your environment (default: [Auto Setting]). To manually specify the IP address, select [Manual Setting]. To automatically specify the IP address using DHCP, select [Auto Setting], and specify the automatic setting method. [IP Address]: When manually specifying the IP address, enter the fixed IP address assigned to the machine. [Subnet Mask]: When manually specifying the IP address, enter the subnet mask. [Default Gateway]: When manually specifying the IP address, enter the default gateway.
[IPv6]	When connecting this machine to the IPv6 environment, specify the IPv6 address. [IPv6]: When using IPv6, set this option to ON (default: ON). [Auto IPv6 Setting]: When automatically specifying the IPv6 global address, set this option to ON (default: ON). The IPv6 global address is automatically set based on the prefix length notified from the router and the MAC address of this machine. [DHCPv6 Setting]: When automatically specifying the IPv6 global address using DHCPv6, set this option to ON (default: ON). [Link-Local Address]: Displays the link-local address. The link-local address is automatically specified from the MAC address of this machine. [Global Address]: When manually specifying the address, enter the IPv6 global address. [Prefix Length]: When manually specifying the address, enter the prefix length of the IPv6 global address between 1 and 128. [Gateway Address]: When manually specifying the address, enter the gateway address.
[DNS Host]	When using the host name to connect to this machine, register the host name of this machine. [DNS Host Name]: Enter the host name of this machine (using up to 63 characters, including only - for symbol marks). If your DNS server does not support the Dynamic DNS function, register the host name of this machine on the DNS server. [Dynamic DNS Setting]: When using the Dynamic DNS, set this option to ON (default: OFF). If your DNS server supports the Dynamic DNS function, the set host name can be automatically registered to the DNS server or changes can be automatically updated. [LLMNR Setting]: When using LLMNR, set this option to ON (default: ON). Using LLMNR enables you to resolve the name even in an environment that does not have a DNS server. This option is only compatible with Windows computers. It is useful to resolve the name in the IPv6 environment.
[DNS Domain Name Setting]	Register the name of a domain this machine joins. [DNS Domain Auto Obtain]: When automatically specifying the domain name using DHCP, set this option to ON (default: ON). [DNS Search Domain Name Auto Retrieval]: When automatically specifying the search domain name using DHCP, set this option to ON (default: ON). [DNS Default Domain Name]: When manually specifying the domain name, enter the default domain name of this machine (using up to 253 bytes, including the host name, - and . for symbol marks). [DNS Search Domain Name1] to [DNS Search Domain Name3]: When manually specifying the domain name, enter the search domain name (using up to 63 characters, including only - and . for symbol marks).
[DNS Server Setting(IPv4)]	When DNS is installed in your environment, register the DNS server. [DNS Server Auto Obtain]: When automatically specifying the DNS server address using DHCP, set this option to ON (default: ON). [Primary DNS Server]: When manually specifying the address, enter the primary DNS server address. [Secondary DNS Server1] / [Secondary DNS Server2]: When manually specifying the address, enter the secondary DNS server address.
[DNS Server Setting(IPv6)]	When DNS is installed in your environment, register the DNS server. [DNS Server Auto Obtain]: When automatically specifying the DNS server address using DHCP, set this option to ON (default: ON). [Primary DNS Server]: When manually specifying the address, enter the primary DNS server address. [Secondary DNS Server1] / [Secondary DNS Server2]: When manually specifying the address, enter the secondary DNS server address.

To register the IPv4 address of the DNS server for this machine ([DNS Server Setting(IPv4)])

To display:

[Utility]
- [Administrator]
  - [Network]
    - [TCP/IP Setting]
      - [TCP/IP Setting1]

Configure the settings to use this machine in a TCP/IP environment.

Setting	Description
[TCP/IP]	When enabling TCP/IP, set this option to ON (default: ON).
[Network Speed]	Select the network speed according to your environment (default: [Auto (10M/100M/1Gbps)]).
[IPv4]	When connecting this machine to the IPv4 environment, specify the IPv4 address. [IP Address Setting Method]: Select the method to specify the IP address to this machine according to your environment (default: [Auto Setting]). To manually specify the IP address, select [Manual Setting]. To automatically specify the IP address using DHCP, select [Auto Setting], and specify the automatic setting method. [IP Address]: When manually specifying the IP address, enter the fixed IP address assigned to the machine. [Subnet Mask]: When manually specifying the IP address, enter the subnet mask. [Default Gateway]: When manually specifying the IP address, enter the default gateway.
[IPv6]	When connecting this machine to the IPv6 environment, specify the IPv6 address. [IPv6]: When using IPv6, set this option to ON (default: ON). [Auto IPv6 Setting]: When automatically specifying the IPv6 global address, set this option to ON (default: ON). The IPv6 global address is automatically set based on the prefix length notified from the router and the MAC address of this machine. [DHCPv6 Setting]: When automatically specifying the IPv6 global address using DHCPv6, set this option to ON (default: ON). [Link-Local Address]: Displays the link-local address. The link-local address is automatically specified from the MAC address of this machine. [Global Address]: When manually specifying the address, enter the IPv6 global address. [Prefix Length]: When manually specifying the address, enter the prefix length of the IPv6 global address between 1 and 128. [Gateway Address]: When manually specifying the address, enter the gateway address.
[DNS Host]	When using the host name to connect to this machine, register the host name of this machine. [DNS Host Name]: Enter the host name of this machine (using up to 63 characters, including only - for symbol marks). If your DNS server does not support the Dynamic DNS function, register the host name of this machine on the DNS server. [Dynamic DNS Setting]: When using the Dynamic DNS, set this option to ON (default: OFF). If your DNS server supports the Dynamic DNS function, the set host name can be automatically registered to the DNS server or changes can be automatically updated. [LLMNR Setting]: When using LLMNR, set this option to ON (default: ON). Using LLMNR enables you to resolve the name even in an environment that does not have a DNS server. This option is only compatible with Windows computers. It is useful to resolve the name in the IPv6 environment.
[DNS Domain Name Setting]	Register the name of a domain this machine joins. [DNS Domain Auto Obtain]: When automatically specifying the domain name using DHCP, set this option to ON (default: ON). [DNS Search Domain Name Auto Retrieval]: When automatically specifying the search domain name using DHCP, set this option to ON (default: ON). [DNS Default Domain Name]: When manually specifying the domain name, enter the default domain name of this machine (using up to 253 bytes, including the host name, - and . for symbol marks). [DNS Search Domain Name1] to [DNS Search Domain Name3]: When manually specifying the domain name, enter the search domain name (using up to 63 characters, including only - and . for symbol marks).
[DNS Server Setting(IPv4)]	When DNS is installed in your environment, register the DNS server. [DNS Server Auto Obtain]: When automatically specifying the DNS server address using DHCP, set this option to ON (default: ON). [Primary DNS Server]: When manually specifying the address, enter the primary DNS server address. [Secondary DNS Server1] / [Secondary DNS Server2]: When manually specifying the address, enter the secondary DNS server address.
[DNS Server Setting(IPv6)]	When DNS is installed in your environment, register the DNS server. [DNS Server Auto Obtain]: When automatically specifying the DNS server address using DHCP, set this option to ON (default: ON). [Primary DNS Server]: When manually specifying the address, enter the primary DNS server address. [Secondary DNS Server1] / [Secondary DNS Server2]: When manually specifying the address, enter the secondary DNS server address.

To register the IPv6 address of the DNS server for this machine ([DNS Server Setting(IPv6)])

To display:

[Utility]
- [Administrator]
  - [Network]
    - [TCP/IP Setting]
      - [TCP/IP Setting1]

Configure the settings to use this machine in a TCP/IP environment.

Setting	Description
[TCP/IP]	When enabling TCP/IP, set this option to ON (default: ON).
[Network Speed]	Select the network speed according to your environment (default: [Auto (10M/100M/1Gbps)]).
[IPv4]	When connecting this machine to the IPv4 environment, specify the IPv4 address. [IP Address Setting Method]: Select the method to specify the IP address to this machine according to your environment (default: [Auto Setting]). To manually specify the IP address, select [Manual Setting]. To automatically specify the IP address using DHCP, select [Auto Setting], and specify the automatic setting method. [IP Address]: When manually specifying the IP address, enter the fixed IP address assigned to the machine. [Subnet Mask]: When manually specifying the IP address, enter the subnet mask. [Default Gateway]: When manually specifying the IP address, enter the default gateway.
[IPv6]	When connecting this machine to the IPv6 environment, specify the IPv6 address. [IPv6]: When using IPv6, set this option to ON (default: ON). [Auto IPv6 Setting]: When automatically specifying the IPv6 global address, set this option to ON (default: ON). The IPv6 global address is automatically set based on the prefix length notified from the router and the MAC address of this machine. [DHCPv6 Setting]: When automatically specifying the IPv6 global address using DHCPv6, set this option to ON (default: ON). [Link-Local Address]: Displays the link-local address. The link-local address is automatically specified from the MAC address of this machine. [Global Address]: When manually specifying the address, enter the IPv6 global address. [Prefix Length]: When manually specifying the address, enter the prefix length of the IPv6 global address between 1 and 128. [Gateway Address]: When manually specifying the address, enter the gateway address.
[DNS Host]	When using the host name to connect to this machine, register the host name of this machine. [DNS Host Name]: Enter the host name of this machine (using up to 63 characters, including only - for symbol marks). If your DNS server does not support the Dynamic DNS function, register the host name of this machine on the DNS server. [Dynamic DNS Setting]: When using the Dynamic DNS, set this option to ON (default: OFF). If your DNS server supports the Dynamic DNS function, the set host name can be automatically registered to the DNS server or changes can be automatically updated. [LLMNR Setting]: When using LLMNR, set this option to ON (default: ON). Using LLMNR enables you to resolve the name even in an environment that does not have a DNS server. This option is only compatible with Windows computers. It is useful to resolve the name in the IPv6 environment.
[DNS Domain Name Setting]	Register the name of a domain this machine joins. [DNS Domain Auto Obtain]: When automatically specifying the domain name using DHCP, set this option to ON (default: ON). [DNS Search Domain Name Auto Retrieval]: When automatically specifying the search domain name using DHCP, set this option to ON (default: ON). [DNS Default Domain Name]: When manually specifying the domain name, enter the default domain name of this machine (using up to 253 bytes, including the host name, - and . for symbol marks). [DNS Search Domain Name1] to [DNS Search Domain Name3]: When manually specifying the domain name, enter the search domain name (using up to 63 characters, including only - and . for symbol marks).
[DNS Server Setting(IPv4)]	When DNS is installed in your environment, register the DNS server. [DNS Server Auto Obtain]: When automatically specifying the DNS server address using DHCP, set this option to ON (default: ON). [Primary DNS Server]: When manually specifying the address, enter the primary DNS server address. [Secondary DNS Server1] / [Secondary DNS Server2]: When manually specifying the address, enter the secondary DNS server address.
[DNS Server Setting(IPv6)]	When DNS is installed in your environment, register the DNS server. [DNS Server Auto Obtain]: When automatically specifying the DNS server address using DHCP, set this option to ON (default: ON). [Primary DNS Server]: When manually specifying the address, enter the primary DNS server address. [Secondary DNS Server1] / [Secondary DNS Server2]: When manually specifying the address, enter the secondary DNS server address.

To send the ping command and confirm the connection ([PING TX Address])

To display:

[Utility]
- [Administrator]
  - [Maintenance]
    - [PING TX Address]

Configure settings to send a ping to the device communicating with this machine to check that the connection has been set up correctly.

Setting	Description
[Host Address]	Enter the address used to send a ping. Use one of the following formats. Example to enter the host name: "host.example.com" Example to enter the IP address (IPv4): "192.168.1.1" Example to enter the IP address (IPv6): "fe80::220:6b.:fe10:2f16"
[Check Connection]	Send a ping to check that this machine has been correctly connected.

Setting

Description

[Host Address]

Enter the address used to send a ping. Use one of the following formats.

Example to enter the host name: "host.example.com"

Example to enter the IP address (IPv4): "192.168.1.1"

Example to enter the IP address (IPv6): "fe80::220:6b.:fe10:2f16"

[Check Connection]

Send a ping to check that this machine has been correctly connected.

To set up a network interface configuration when adding a network interface ([Network I/F Configuration])

To display:

[Utility]
- [Administrator]
  - [Network]
    - [Network I/F Configuration]

To add a network interface to this machine, set a network interface configuration (default: [Wired Only]).

[Wired Only]: Select this option to use this machine only in the wired LAN environment.
[Wireless Only]: Select this option to use this machine only in the wireless LAN environment. This machine runs as a wireless LAN adapter in a wireless LAN environment.
[Wired + Wireless (Secondary Mode)]: Select this option to use this machine in both the wired LAN environment and wireless LAN environment. This machine runs as a wireless LAN adapter in a wireless LAN environment.
[Wired + Wireless (Primary Mode)]: Select this option to use this machine in both the wired LAN environment and wireless LAN environment. This machine runs as a wireless LAN access point in a wireless LAN environment.
[Wired + Wireless (Wi-Fi Direct)]: Select this option to use this machine in both the wired LAN environment and wireless LAN environment. This machine runs as a Wi-Fi Direct group owner in a wireless LAN environment.

This setting is displayed when the option is installed in this machine. For details on the required option, refer to Here.

To configure a setting for connecting this machine to a wireless network environment ([Wireless Network Setting])

To display:

[Utility]
- [Administrator]
  - [Network]
    - [Wireless Network Setting]

Configure settings to use this machine as a wireless LAN access point or wireless LAN adapter.

Setting	Description
[Main Device Wireless Setting]	Here
[Wireless LAN Adapter]	Here
[Device Setting]	Here