Saving the Number of Copy Sheets

To copy on both sides of paper ([Duplex])

To display:

[Classic Style]
- [Copy]
  - [Duplex/Combine]
    - [Original > Output]

Copies an original onto both sides of paper.

Setting		Description
[Original > Output]		Select a combination of the original to be loaded (1-sided original or 2-sided original) and the copy method (1-sided copy or 2-sided copy). If you have selected other than [1Sided > 1Sided], also specify [Binding Position] and [Original Direction].
[Binding Position]		Select the binding positions of the original and copy.
	[No. of Originals]	Select the original binding position when loading a 2-sided original. [Auto]: The binding position of the original is specified automatically. When the long side of the original is 11-11/16 inches (297 mm) or less, the binding position is set to the long side of the paper. When the long side of the original exceeds 11-11/16 inches (297 mm), the binding position is set to the short side of the paper. [Left Bind]: Select this option when the binding position is set to the left of the original. [Right Bind]: Select this option when the binding position is set to the right of the original. [Top Bind]: Select this option when the binding position is set to the top of the original.
	[Output]	Select the binding position when printing on both sides of paper. [Auto]: The binding position of a copy is specified automatically. When the long side of the original is 11-11/16 inches (297 mm) or less, the binding position is set to the long side of the paper. When the long side of the original exceeds 11-11/16 inches (297 mm), the binding position is set to the short side of the paper. [Left Bind]: Select this option when setting the binding position to the left of a copy. [Right Bind]: Select this option when setting the binding position to the right of a copy. [Top Bind]: Select this option when setting the binding position to the top of a copy.
[Original Direction]		Specify the orientation of the loaded original.

To copy multiple pages on the same side of a single sheet ([Combine])

To display:

[Classic Style]
- [Copy]
  - [Duplex/Combine]
    - [Combine]

Select the number of original pages to be copied on a single page.

If [4in1] or [8in1] is selected, you can select the combined page layout from [Horizontal] or [Vertical].

To copy an original image repeatedly on the same side of a single sheet ([Image Repeat])

To display:

[Classic Style]
- [Copy]
  - [Application]
    - [Layout]
      - [Image Repeat]

Copies an original page repeatedly onto the same side of a single sheet.

Setting	Description
[ON]/[OFF]	Select [ON] to specify Image Repeat.
[Image Repeat Setting]	Select the copy method on the paper. [With Margin]: Copy an original image including its edges repeatedly on a single sheet of paper. The number of times repeated is determined automatically according to the original and paper sizes, or zoom ratio. [Without Margin]: Copy an original image repeatedly as much as possible on a single sheet of paper. The images on the edge of the paper may be partially lost. The number of times repeated is determined automatically according to the original and paper sizes, or zoom ratio. [2/4/8 Repeat]: Copy an original image repeatedly for the registered number of times on a single sheet of paper. Images that do not fit the divided area will be partially lost. If you select [2 Repeat], you can specify the interval between images in [Repeat Interval].
[Scan Range]	You can either to set the machine to automatically detect the scan range (original size), or specify the scan range manually. If the original is of a standard size, selecting [Auto Detect] causes the machine to automatically detect the size. If the machine cannot detect the size of irregular sized originals or photos, manually specify the size.

Setting

Description

[ON]/[OFF]

Select [ON] to specify Image Repeat.

[Image Repeat Setting]

Select the copy method on the paper.

[With Margin]: Copy an original image including its edges repeatedly on a single sheet of paper. The number of times repeated is determined automatically according to the original and paper sizes, or zoom ratio.

[Without Margin]: Copy an original image repeatedly as much as possible on a single sheet of paper. The images on the edge of the paper may be partially lost. The number of times repeated is determined automatically according to the original and paper sizes, or zoom ratio.

[2/4/8 Repeat]: Copy an original image repeatedly for the registered number of times on a single sheet of paper. Images that do not fit the divided area will be partially lost.
If you select [2 Repeat], you can specify the interval between images in [Repeat Interval].

[Scan Range]

You can either to set the machine to automatically detect the scan range (original size), or specify the scan range manually.

If the original is of a standard size, selecting [Auto Detect] causes the machine to automatically detect the size. If the machine cannot detect the size of irregular sized originals or photos, manually specify the size.

To skip blank pages ([Blank Page Removal])

To display:

[Classic Style]
- [Copy]
  - [Application]
    - [No. of Originals]
      - [Original Settings]
        [Blank Page Removal]

When [Blank Page Removal] is specified to scan an original including blank pages using the ADF, blank pages are excluded from scan targets. Blank pages detected are not counted as original pages.

[Blank Sheet Detection Level] (Here)

To copy the front and back sides of a card on the same side of a single sheet ([Card Shot])

To display:

[Classic Style]
- [Copy]
  - [Application]
    - [Other]
      - [Card Shot]

Arranges the front and back sides of the card on the same side of a single page to make copies when you want to copy cards.

Setting	Description
[ON]/[OFF]	Select [ON] to specify Card Shot.
[Original Size]	Specify the size of a card to be copied. From the [Registered Paper Size], you can recall a size previously stored and specify the size. After you have entered the size, select a key in [Registered Paper Size], and tap [Register]. Then the size you have entered is registered in the memory. You can recall the registered size at a later date.
[Registered Paper Size]	Displays the sizes registered in memory. When you call a registered size from the memory, tap the key of the desired registration name, then tap [Recall].
[Layout]	Select the layout for arranging the front side and back side of the card on the paper from [Top/Bottom], [Left/Right (Top Half)], and [Left/Right].
[Zoom]	Select a zoom ratio for copying. [Full Size]: Copy by enlarging according to the paper size. [x1.0]: Copy with the same size as the card.
[Change registered size name]	Change the name of the key you selected in [Registered Paper Size].

[Card Shot] (Here)