Restricting the Secondary Copy of Copied Paper

To print a concealed security watermark that appears when copied ([Copy Protect])

To display:

[Classic Style]
- [Copy]
  - [Application]
    - [Copy Security]
      - [Copy Protect]

A text such as "Copy" or "Private" is printed as a concealed text.

Setting	Description
[ON]/[OFF]	Select [ON] to set Copy Protect.
[Copy Protect Type]	Select a stamp used. The date and time can also be printed. [Preset Stamp]: Select a preset stamp to be printed. [Registered Stamp]: Select a registered stamp to be printed. [Date/Time]: Select a format (type) of date and time to be printed. The date/time when the original was scanned is stamped on the paper. [Other]: Specify the job number, the machine's serial number, and distribution control number to be printed.
[Stamp Selection]	The registration status of the stamp is displayed.
[Detail Setting]	Select the density, size, and pattern overwriting of print characters if necessary.
[Copy Protect]	Select how to print the copy protect pattern. Also, you can set the pattern contrast if necessary.
[Background Pattern]	Select a background pattern.
[Change/Delete Position]	Allows to check, change or delete the stamp position settings if necessary. You can change the stamp sequence and insert a space between stamps. When you select up to four stamps, you can change their angle (45 degrees).

To print stamps such as "Copy" and "Private" on the entire page ([Stamp Repeat])

To display:

[Classic Style]
- [Copy]
  - [Application]
    - [Stamp/Composition]
      - [Stamp Repeat]

Print a stamp such as "Copy" or "Private" on the entire page.

Setting	Description
[ON]/[OFF]	Select [ON] to set Stamp Repeat.
[Stamp Repeat Type]	Select a stamp used. The date and time can also be printed. [Preset Stamp]: Select a preset stamp to be printed. [Registered Stamp]: Select a registered stamp to be printed. [Date/Time]: Select a format (type) of date and time to be printed. The date/time when the original was scanned is stamped on the paper. [Other]: Specify the job number, the machine's serial number, and distribution control number to be printed.
[Stamp Selection]	The registration status of the stamp is displayed.
[Detail Setting]	Select the density, size, and pattern overwriting of print characters if necessary.
[Change/Delete Position]	Allows to check, change or delete the stamp position settings if necessary. You can change the stamp sequence and insert a space between stamps. When you select up to four stamps, you can change their angle (45 degrees).

You can print multiple stamps, such as registered stamp, preset stamp, date/time, job number, and serial number, at a time. However, the number of stamps that can be printed may be limited depending on the type and angle of the selected stamps.

To embed copy restriction information in the copy protection function that prints concealed security watermarks in the background ([Copy Guard])

To display:

[Classic Style]
- [Copy]
  - [Application]
    - [Copy Security]
      - [Copy Guard]

Copy Guard is a copy protection function that prints concealed security watermarks such as "Private" or a date in the background to prevent unauthorized copying, and embeds a copy restriction pattern on all printed sheets.

If an attempt is made using a device that supports the copy guard function to copy a sheet that has been copy protected, a copy guard pattern is scanned, the copying process is canceled, and the job is deleted.

Setting	Description
[ON]/[OFF]	Select [ON] to set Copy Guard.
[Stamp Text]	Select a stamp used. The date and time can also be printed. [Preset Stamp]: Select a preset stamp to be printed. [Date/Time]: Select a format (type) of date and time to be printed. The date/time when the original was scanned is stamped on the paper. [Other]: Specify the job number, the machine's serial number, and distribution control number to be printed.
[Stamp Selection]	The registration status of the stamp is displayed.
[Detail Setting]	If necessary, select the text printing format.
[Copy Guard]	If necessary set the contract of a copy guard pattern.
[Background Pattern]	Select a background pattern.

To use this function, an option is required. For details on the required option, refer to Here.
To use this function, select [Copy Security] (Here), and set [Copy Guard] to ON.
The Copy Guard function does not support color paper, envelopes and transparencies.

To embed a password in the copy protection function that prints concealed security watermarks in the background ([Password Copy])

To display:

[Classic Style]
- [Copy]
  - [Application]
    - [Copy Security]
      - [Password Copy]

Password Copy is a copy protection function that prints concealed security watermarks such as "Private" or a date in the background to prevent unauthorized copying, and embeds a password for the password copy function on all printed sheets.

If an attempt is made using a device that supports the password copy function to copy a sheet that has been prepared for password copy, a password copy pattern is scanned and entry of a password is requested. Copying starts if the correct password is entered.

Setting		Description
[ON]/[OFF]		Select [ON] to set Password Copy.
[Password]		Enter the password to restrict copying.
[Stamp Setting]		Set a stamp to be printed on each paper.
	[Stamp Text]	Select a stamp used. The date and time can also be printed. [Preset Stamp]: Select a preset stamp to be printed. [Date/Time]: Select a format (type) of date and time to be printed. The date/time when the original was scanned is stamped on the paper. [Other]: Specify the job number, the machine's serial number, and distribution control number to be printed.
	[Stamp Selection]	The registration status of the stamp is displayed.
	[Detail Setting]	If necessary, select the text printing format.
	[Password Copy Pattern]	Specify the contract of password copy guard pattern if necessary.
	[Background Pattern]	Select a background pattern.

To use this function, an option is required. For details on the required option, refer to Here.
To use this function, select [Copy Security] (Here), and set [Password Copy] to ON.
The Password Copy function does not support color paper, envelopes and transparencies.