[Paper Separation] (With Large Capacity Unit LU-208/Large Capacity Unit LU-208XL mounted)

When Large Capacity Unit LU-208/Large Capacity Unit LU-208XL is mounted, change the air blow conditions, and blow air to the paper loaded in the paper tray.

This function separates the loaded paper sheets to enable smooth paper feeding.

NOTICE

• The optional Large Capacity Unit LU-208 or Large Capacity Unit LU-208XL is required to use this function.

Tips

• Depending on the paper type, smooth feeding may be difficult, and paper jams may occur. In this case, manually change the air blow conditions.

Tips

About [Auto]

• If you select Auto, the specific recommended settings are applied depending on the paper type, weight, and paper size. Detailed items cannot be adjusted individually.

1

Press [Manual].

2

Adjust the air volume with [Side Air Level Setting].

• Pressing [Weak] weakens the air volume on the side, and improves the thin paper feeding performance depending on conditions. Pressing [Strong] strengthens the air volume on the side, and improves the thick paper feeding performance depending on conditions. To turn off the air volume on the side, select [OFF].

3

Press [Print Mode].

4

Press Start on the Control panel.

5

Press [Exit PrintMode].

6

Repeat steps 2 to 5 until the desired result is obtained.