Changing the priority

This section describes how to change the priority of the spot color table among the multiple spot color tables with the same prefix (in the same group) which are registered in the image controller.

To change the priority, use Spot Color Table Management screen.

The priority defines which spot color table is adopted to the spot color specified by the application.

1. Click Table on Spot Color screen.

   The Spot Color Table Management screen is displayed.

   • supplementary explanationSimilar operation can be done when you select File menu - Table.

2. From the tree view, select Controller.

   The list appears according to the selection.

   • supplementary explanationFor details about how to connect another image controller, refer to Switch the Image Controller to Connect.

3. From the list, select the spot color table to change the priority.

   • supplementary explanationThe list is displayed per group. Within the group, displays in order of priority.

   • supplementary explanationFactory-preset spot color tables are displayed in red, with an asterisk (*) at the end of their names.

   • supplementary explanationWhen you reload the information of the image controller connected currently, select File menu - Reload.

4. Click  or  change the position of the selected spot color table.

   The position of the selected spot color table moves within the Prefix group.

   • supplementary explanationClick Factory Default when you want to reset the priority settings of the spot color table which was registered at factory shipping. In this case, the priority of the spot color table created by user is not changed.

5. Close the Spot Color Table Management screen.