[Booklet] - Blank Cover - [With Cover]
Overview
Configure the paper settings for the front cover and back cover when attaching blank covers to a booklet.
When a cover is attached, blank paper is inserted first regardless of the simplex/duplex mode of the original or copy.
NOTICE
- Post Inserter PI-502 is required to feed blank covers from the Post inserter tray.
Tips
- To attach blank covers to a booklet, load cover paper of the same size as the body set into any Paper tray or the Post inserter tray. For details, refer to [Front Cover Setting] / [Back Cover Setting].
If all cover sheets are set to [ON], they are printed in the following order.
1. [Front Cover] - [<PI Paper>]
2. [Front Cover] - [<Tray Paper>]
3. Tray paper of body set
4. [Back Cover] - [<Tray Paper>]
5. [Back Cover] - [<PI Paper>]
Setting Items
Setting item | Description | ||
|---|---|---|---|
[Front Cover] | [<Tray Paper>] | [OFF] | Does not attach a front or back cover. |
[ON] | Attaches a front cover by feeding paper from the selected tray. | ||
[Back Cover] | [Paper Setting] | Configures the paper setting for the front or back cover. This setting is available when [ON] is selected in [<Tray Paper>]. | |
[Front Cover] | [<PI Paper>] | [OFF] | Does not attach a front or back cover. |
[ON] | Attaches a front or back cover by feeding paper from the Post inserter. | ||
[Back Cover] | [Paper Setting] | Configures the paper setting for the front or back cover. This setting is available when [ON] is selected in [<PI Paper>]. | |
[Quantity] | Sets the number of sheets to load into the Post inserter tray. This setting is available when [ON] is selected in [<PI Paper>]. | ||
Setting Procedure
This section describes how to configure settings when [<Tray Paper>] or [<PI Paper>] is set to [ON].
1
Press [Paper Setting] of [<Tray Paper>] or [<PI Paper>].
The [Paper Setting] screen is displayed.
2
To use the registered paper profile, press [Profile No.] and recall it.
3
Set [Paper Tray].
Use the paper tray selection key to select a Paper tray.
For [<PI Paper>], [PI1] and [PI2] are only selectable as the Paper tray.
4
Set [Paper Size].
Use the standard paper size selection key to select the paper size.
5
To select the custom size, press [Custom] of [Paper Size].
The setting screen is displayed.
6
Use the on-screen keypad to enter the paper size.
The setting range varies depending on the paper feed options mounted on this system and the selected paper tray.
To use the custom size registered in this system, press [Size Recall]. For details, refer to Setting Procedure (Setting the Custom Paper Size).
7
Set [Paper Type].
8
Set [Weight].
9
Set [Colored Paper].
To use the [User Color] registered in this system, press [Recall], and configure the setting. For details, refer to [Colored Paper].
For [<PI Paper>], [Colored Paper] is not available.
10
Configure settings for [Punch].
For [<PI Paper>], [Punch] is not available.
11
Press [OK].
12
For [<PI Paper>], press [Quantity].
The setting screen is displayed.
13
Use the on-screen keypad to enter the number of sheets fed from the Post inserter.
Range: 1 to 40
14
Press [OK].
in the upper-right of a page, it turns into 
and is registered as a bookmark.