Adjustment

A. Max. 20 sheets.

For details, refer to [Scan Meas.].

A. Output the background sheet for measurement with a paper size of A3 or 11 e 17.

A. Adjust the image quality before outputting a job.

A. The density sensor of the optional Intelligent Quality Optimizer IQ-601 or Relay Unit RU-518m is required to carry out calibration for machine color management.

Perform [Color Density Control] using the density sensor of Intelligent Quality Optimizer IQ-601 or Relay Unit RU-518m. For details, refer to [Color Density Control].

A. Yes, you can.

Color tone can be adjusted using [Tone Curve Adjustment...] of [CNTL]. For details, refer to [Tone Curve Adjustment...].

A. Store the data measured with AccurioPro ColorManager on a USB device (USB flash drive, etc.) or on a computer on the same network as this system, and then register it on this system.

A. The colorimetry is affected, so pay attention to the colors of a thing under the chart.

For details about how to use the colorimeter, refer to its user's guide.

Tips

• The colorimetry is also affected by the color of a desk to put a chart on.
• For measurement, put a chart on white paper or a white board.
• For board, use the measurement board supplied with the colorimeter.
• For paper, pile 10 sheets or more of the same paper type as a chart.
• When a chart on which special toner has been used is color-measured, it may be affected by the color of the paper used for the chart.

A. Create a "\C14010\ADJUST_DATA" folder just under the USB flash drive, and save adjustment data in the folder.

A. Automatic inspection is a function that compares the RIP image with the target image, and automatically detects stains and missing images on printed materials.

A. Set an area that is not subject to automatic inspection, or set an area that is subject to special inspection, such as variable printing, for example by changing part of an image intentionally. Efficient inspection is enabled by preventing unnecessary errors and automating checks such as serial number printing.

Reference

• For details about the automatic inspection area, refer to [Inspection Area Setting].

A. Yes, you can.

Automatic inspection can be performed by selecting [Scan Image] in [Reference Image Type Selection] and registering a reference image.

For details, refer to [Performing Automatic Inspection for Prints that Use Special Toner] in [Print Workflow].

NOTICE

• The special toner-related functions are only available for AccurioPress C14010S / AccurioPress C12010S / AccurioPress C10500S.

Tips

In any of the following cases, automatic inspection of printing using special toner is not possible.

• [Reference Image Type Selection] is set to [RIP Data] in [IQ Function Set.].
• [Reference Image Type Selection] is set to [RIP Data] in [Common Setting] of [User Setting] or [Administrator Setting].
• [Auto Inspection] is set to [Automatic Processing Mode by RIP Images] in [Quality] of PS Plug-in Driver or AccurioPro Print Manager.

A. Yes, you can.

For details, refer to [AutoInspect.Report].