Web Utilities | [Panel Script] Area

[Panel Script] Area

Record or replay operations on the remote panel.

The recorded operation procedures (scripts) can be saved in this system, or loaded from this system to be replayed.

This function is useful for demonstrating operation procedures or applying the same setting procedures to another machine.

NOTICE

The following settings are required to use this function.

Establish network communications between the machine and computer in [TCP/IP Setting] of this system.
Set [WebUtilities Setting] of this system to [ON].
Set [Enhanced Security Mode] of this system to [OFF].
Set [Remote Panel Setting] of this system to [Enable].
Enable JavaScript of the browser you are using.

Tips

Only the operation procedures on the remote panel can be recorded. Operation procedures on this system are not recorded.

Reference

Setting item	Description
[Panel Script] display area	Displays the script record and execution result.
[Show Result]	Check the script execution result. Each script command line is prefixed by either one of the following symbols. When succeeded: ., When failed: e
[Show Script]	Switches to the mode for recording, saving, or loading operation procedures. The recorded or loaded script is displayed.
[Execute]	Executes the script displayed on the [Panel Script] screen. The button is changed to the [Stop] display during script execution.
[Stop]	Stops the script execution.
[Clear]	Deletes the script displayed on the [Panel Script] screen.
[Opration Log On]	Records operation procedures. This function records all operation part pressing and key operations on the remote panel.
[Opration Log Off]	Stops or ends recording of operation procedures.
[Save to MFP]	Saves the script displayed on the [Panel Script] screen in this system. Click a number button to save the script. If a saved script already exists, it will be overwritten.
[Load from MFP]	Loads the script saved in this system, and displays it on the [Panel Script] screen.