Ref. Image Manage. | [Ref. Image Manage.]

[Ref. Image Manage.]

Automatic inspection is a function that compares the registered reference image with the target image, and detects problematic output paper.

[Ref. Image Manage.] allows you to register or manage the reference image for automatic inspection.

You can also set an area that is not subject to automatic inspection or a sequential check.

Reference images can be checked with the Touch panel of this system or Web Utilities of Auto Inspection Unit UK-301.

NOTICE

All the following options are required to use this function.

Tips

To perform automatic inspection, be sure to register reference images in [Reference Image List 1]. It is recommended to register frequently used images to [Reference Image List 1].
We recommend that you register infrequently used images in [Reference Image List 2].
Up to 1,000 reference images can be registered. You may not be able to register up to the maximum number of images depending on the scanning paper size.
[Reference Image Name] of the image previously used for automatic inspection is marked by a yellow round icon.

Reference

Screen access

Setting item	Description
[Reference Image List 1]	Displays the reference images registered in [Reference Image List 1].
[Reference Image List 2]	Displays the reference images registered in [Reference Image List 2].
[InspectionAreaSet.]	Sets an area for inspecting the selected reference image. Only displayed in [Reference Image List 1].
[MultipleSelect]	To simultaneously select multiple rows, first press this key, and select a reference image. Pressing this key again releases the selection. When multiple images are selected, you cannot move the list or set an inspection area.
[All Select]	Selects all the reference images. Press [MultipleSelect] to release the selections.